User's Guide

User’s Guide is divided into sections with each feature of Bluespoon™ AX being described in steps :
Before starting out on a section with a feature, please read all the steps within that specific feature.
_________________________________________________________________________________
PAIRING the headset with another Bluetooth® enabled device (e.g. mobile phone) :
Current mode:
Bluespoon™ AX is turned off and not connected to a Bluetooth® mobile phone.
What to do?
Press and hold down the TALK button. BLUE light will flash 4 times after a short period. Keep holding button down, until RED and BLUE
indicator lights flash repeatedly.
Bluespoon™ AX will do what?
Bluespoon™ AX will now be in the pairing mode for 2 minutes. Both the RED and BLUE indicator lights in the TALK button will flash
repeatedly at this time.
And then…..
By using your mobile phone’s Bluetooth® menu, start to search for Bluespoon™ AX. When the search is complete, the name of
Bluespoon™ AX will appear as “Bluespoon AX”, on your mobile phone’s screen. When the mobile phone requests a passkey : enter :
0000.
NOTE:
For mobile phones supporting Bluetooth® Hands-Free profile:
Some of the phones that use Bluetooth® Hands-Free profile might need to connect to Bluespoon™ AX after pairing in order to work with
the headset. This can be done in two w ays. Either you connect to the phone by pressing the TALK button on the headset, or you
connect to Bluespoon™ AX using the phone’s menu. Remember also to set Bluespoon™ AX as “authorised” in the mobile phone’s
Bluetooth® menu. (consult the mobile phone’s manual in order to do so).
Pairing with more than one device:
Bluespoon™ AX is capable of pairing with up to 8 devices.
E.g. a mobile phone, the Bluespoon™ Home and the Bluespoon™ USB dongle.
If Bluespoon™ AX is paired with more than one device it will connect to the last connected device This means that if you want to
connect with another device then initiate the bluetooth connection from that device. Now this device will be the last connected device.
If you pair with more than 8 devices, one on the list will be deleted (the one that has not been used recently).
See FAQ for further explanation.
___________________________________________________________________________________________________________
FUNCTIONS :
Turn the headset off:
Current mode:
Bluespoon™ AX is turned on and/or connected.
What to do?
Press and hold down the TALK button for approximately 4 seconds.
Bluespoon™ AX will do what?
The RED indicator light will flash 5 times, and Bluespoon™ AX will play an audio sequence in the form of a high tone followed by a low
tone in the loudspeaker. Bluespoon™ AX will automatically disconnect before it turns off.
Turn the headset on:
Current mode:
Bluespoon™ AX is turned off.
What to do?
Press and hold down the TALK button for approximately 4 seconds.
Bluespoon™ AX will do what?
The BLUE indicator light will flash 5 times and Bluespoon™ AX will play an audio sequence in the form of a low tone followed by a high
tone in the loudspeaker.
NOTE: Audio tones can only be heard if you wear the headset.
______________________________________________________________________________________