User's Manual

6
Setup System with Cel-Fi WAVE
The system is congured to automat-
ically select the best cellular service to
boost. This step can be skipped for any
user that wants to keep the automatic
settings. However, a user may manual-
ly congure the system’s boost prefer-
ences using the Cel-Fi WAVE app. To
do this, use the Cel-Fi WAVE app on a
smartphone with Bluetooth enabled to
connect to the Cel-Fi GO X system, and
manage the boost settings.
TIPS AND TECHNIQUES
• Install antenna at least 12 inches from any other antennas
for best performance
• Antenna should be free of obstructions
• Antenna should be away from windows (including sunroof
or other openings)
• Install 8 inches away from any people
Install Donor Antenna
I
Install Server Antenna
2
4
Connect Donor & Server Antennas
to the Cel-Fi GO X Unit
5
Plug in Cel-Fi GO X
3
Mount Cel-Fi GO X Near Power Outlet
Specifications:
Frequency Support Multiple variations of the product are available with
different frequency support.
Model:
G32-2/4/5/12/13X
Band Name Downlink Uplink
2 1900 PCS 1930 1990 1850 1910
4 AWS-1 2110 2155 1710 1755
5 850 869 894 824 849
12 700 a 729 746 699 716
13 700 c 746 756 777 787
Model:
G32-1/3/5/7/8/20X
Band Name Downlink Uplink
1 2100 2110 2170 1920 1980
3 1800+ 1805 1880 1710 1785
5 850 869 894 824 849
7 2600 2620 2690 2500 2570
8 900 925 960 880 915
20 800 DD 791 821 832 862
Dimensions
272.5 mm 96.5 mm 43.5 mm 850 g
Length Width Height Weight
Gain Up to 100dB system gain
Environmental Operating Temp: 0 - 65C
Relative Humidity: 95%
Power 10dBm/5MHz (16dBm per band)
Antenna Connectors SMA-Female
Certications 3GPP TS 25.143 Rel.10
(All variants) 3GPP TS 36.143 Rel.10
RoHS 2
BQB (Bluetooth)
(G32-2/4/5/12/13 FCC
variants only) ISED
(G32-1/3/5/7/8/20 IEC 62368-1:2004
variants only) EN 301 489-1 v2.1.1
EN 301 489-17 v3.1.1
EN 301 489-23 v1.5.1
EN 301 908-1 v11.1.1
EN 301 908-11 v11.1.1
EN 301 908-15 v11.1.1
EN 300 328 v2.1.1
EN 62311 (2008)
Regulation (EC) 1275/2008 (Standby and Off mode)
Regulation (EC) 278/2009 (External Power Supply)
Cel-Fi GO X Installation
Cel-Fi GO X Smart Signal Booster www.cel-.com
DO NOT plug in at this time.
Find a power outlet. Mount Cel-Fi GO X
near the power outlet.
Your Cel-Fi GO X will automatically select the strongest
cellular signal to boost.
Find the location
with the best signal.
Install Donor Antenna
where the mobile device
receives this signal.
DONOR
ANTENNA
DONOR
ANTENNA
DONOR
ANTENNA
DONOR
ANTENNA
DONOR ANTENNA NOT INCLUDED
SAFETY: DO NOT INSTALL any equipment close
to power lines or drill into walls or other structural
elements without rst ensuring the location is safe and
that there are no hidden items that could cause injury.
Install Server Antenna
where coverage is needed.
SERVER
ANTENNA
ANTENNA NOT INCLUDED
DONOR
ANTENNA
SERVER
ANTENNA
SERVER
ANTENNA
SERVER
ANTENNA
CEL-FI GO
CEL-FI GO
DONOR
ANTENNA
SERVER
ANTENNA
CEL-FI GO
LEFT SIDE:
Server Antenna Connector
RIGHT SIDE:
Donor Antenna Connector
TIPS AND TECHNIQUES
• For best results, install Donor and Server Antennas such
that there is substantial material between the antennas.
This will create isolation and allow the system to perform
at higher gain without oscillation or feedback.
• Keep Donor and Service Antennas separated/isolated
from each other for best performance
• Do not use cable splitters for Donor Antennas.
• Follow the installation instructions for your chosen
antennas.