User's Guide

9/10/2019
28
RA Mounting
The Remote Annunciator is designed to be wall-mounted. Mounting accessories, including screws and
anchors, for common material types (drywall, plywood, concrete) are included in the standard kit.
The QUATRA RED RA has two (2) secure mounting tabs, one on each top/bottom side.
Caution. Make sure the area behind any surface is free of electrical wires or other dangerous elements
before drilling.
1. To mount the RA, first determine the approximate location on the wall for the unit.
2. Hold the unit up on the wall and, using a pencil or similar marker, mark the mounting tabs points.
3. Using a drill, drill the location for the wall anchors.
4. Hammer in the wall anchors.
5. Place the RA in the right location and screw on the mount.
RA Grounding
1. Connect one side of the grounding cable to the grounding terminal on the equipment with a ¼" – 20
Bolt.
2. Connect the other end to the main grounding bar installed inside the fire room. The recommended
cable gauge is AWG #10 or AWG #12 and color code green/yellow.
Step 2
Step 5