User's Guide

9/10/2019

Caution. Make sure the area behind any surface is free of electrical wires or other dangerous elements

before drilling.

1. To mount the MBBU, first determine the approximate location on the wall for the unit.

2. Hold the unit against the wall and use a pencil or similar marker to mark the top and bottom anchor

points.

3. Using a drill, drill holes for the wall anchors.

4. Hammer in the wall anchors.

5. Place the MBBU against the wall anchors and affix all anchor screws.

Figure 3. MBBU Wall Mounting

Notes:

 The unit mounting procedure is for concrete walls only.

 The weight of the unit may require two people to manipulate the unit.

 The unit must be installed horizontally with the connectors on the top side.