User's Guide

9/10/2019

Main Features

 Antenna pointing algorithm to optimize FirstNet donor signals

 Uplink gain automatically calculated and set based on donor site location

 Near real-time uplink (UL) automatic gain control (AGC).

 Coverage footprint provided via Power over Ethernet (PoE) up to 325 ft (100m) range from NU to CU.

 A single NU and up to six (6) CU's may be attached.

 Remote Management through Cel-Fi WAVE portal

 Real-time, slot-to-slot gain control

 Automatic setting of uplink (UL) and downlink (DL) gain during the commissioning phase

 Downlink gain automatically set to 20dB isolation per NFPA 1221

 Maximum uplink gain automatically calculated based on donor site location

 Uplink AGC and gating can respond in <1.2ms to changing inputs levels, making the QUATRA RED

system very robust against the near-far effect.

DAQ test can be done using the WAVE PRO app without support from the dispatch center.

Ordering Info

Cel-Fi QUATRA RED is available in four different configurations

 FirstNet + LMR (700 MHz & 800 MHz)

 LMR (700 MHz & 800 MHz)

 700 MHz only

 800 MHz only

Note: NU & CU model configurations are not interchangeable.

Model Number

Product Description

F42-67ENU

Cel-Fi QUATRA RED NU, FirstNet + 700/800MHz LMR

F41-8XCU

Cel-Fi QUATRA RED CU, FirstNet + 700/800MHz LMR

F42-10L-100

Cel-Fi QUATRA RED MBBU Large (for systems w/ 3 to 6 CUs; 12 Hrs)

F42-10S-100

Cel-Fi QUATRA RED MBBU Small (for systems w/ 1 to 2 CUs)

F42-10X-100

Cel-Fi QUATRA RED MBBU Large (for systems w/ 3 to 6 CUs; 24 Hrs)

F42-10R-100

Cel-Fi QUATRA RED Remote Anunciator Panel

F42-10E-100

Cel-Fi QUATRA RED Emergency Power-Off Switch

Table 1. Model Numbers