User's Manual

ManualsBrandsNextivity ManualsElectronicsT-Mobile Provider Specific Consumer Signal Booster

Pantone: Black C

Pantone: 137C

Pantone: 542C

For additional information about T-Mobile 4G LTE Signal BoosterInstallation go to: www.T-Mobile.com/SignalBoosterhelp

T-Mobile® 4G LTE Signal Booster

To use this product you need:

• A T-Mobile 3G, 4G or 4G LTE compatible mobile phone

• An area inside your home that receives at least one bar of

3G, 4G or 4G LTE coverage

• Power outlets

WINDOW UNIT

COVERAGE UNIT

Before You Begin.

If you can nd a place in your home that gets at least one bar of 3G, 4G or 4G LTE

signal, the revolutionary NEW T-Mobile 4G LTE Signal Booster system will bring

you blazing fast downloads, smoother video and surng, and improved voice

coverage throughout your home.

T-Mobile 4G LTE Signal Booster is a true plug-and-play system that doesn’t

require the installation of antennas or cables.

IMPORTANT: Your T-Mobile 4G LTE Signal Booster is electronic equipment. Both

units must be kept indoors and in a dry, cool, well ventilated area.

In this package you will nd:

• Window Unit

• Coverage Unit

• Two Power Adapters

If you need additional information on features and services, visit us at

www.t-mobile.com or, using an alternate phone, call us at 1-800-937-8997

This T-Mobile 4G LTE Signal Booster is a T-Mobile-owned device. You will be

charged up to $500 if you fail to return the device after termination of your service

with T-Mobile, or return it in a damaged condition.

I M PORTA N T

This is a CONSUMER device.

BEFORE USE, you MUST REGISTER THIS DEVICE with your

wireless provider and have your provider’s consent. Most

wireless providers consent to the use of signal boosters.

Some providers may not consent to the use of this device on

their network. If you are unsure, contact your provider.

You MUST operate this device with approved antennas and

cables as specied by the manufacturer. Antennas MUST be

installed at least 20 cm (8 inches) from any person.

You MUST cease operating this device immediately if

requested by the FCC or a licensed wireless service provider.

WARNING. E911 location information may not be provided

or may be inaccurate for calls served by using this device.

When used with any mobile device utilizing the 1710-1755

MHz band, the FCC limits booster equipment placement to a

maximum of 10 meters above ground level. Installation of this

equipment which does not comply with federal requirements

may subject the owner to FCC enforcement action.

NOT FOR RESALE.

Changes or modications not expressly approved by Nextivity,

Inc. could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help

Coverage is not available everywhere, see coverage details at

www.T-Mobile.com. Cel-Fi is a trademark of Nextivity, Inc.

T-Mobile and the magenta color are registered trademarks of

Step 1

Find the location with the best 3G, 4G or 4G LTE

coverage:

The rst step in setting up your T-Mobile 4G LTE Signal

Booster system is to nd the location in your home or

oce with the best 3G, 4G or 4G LTE signal. Use your

phone to identify the area with the most bars of signal.

Typically, the best service will be near a window in the

highest oor of your home or oce. Make sure a 3G,

4G or 4G LTE icon is displayed on your handset.

Step 2

Plug in the Window Unit:

Plug the Window Unit into an easily accessible

outlet near the area with the strongest 3G, 4G or 4G

LTE signal. (Note: both of the power supplies in your

kit are identical.) Make sure that at least one bar is

displayed on the signal strength indicator on the

front of the Window Unit. If you do not see at least

one bar, try a dierent location.





WINDOW UNIT

DISPLAY

Summary of content (2 pages)

PAGE 1
For additional information about T-Mobile 4G LTE Signal BoosterInstallation go to: www.T-Mobile.com/SignalBoosterhelp 4 5 3 2 1 The first step in setting up your T-Mobile 4G LTE Signal Booster system is to find the location in your home or office with the best 3G, 4G or 4G LTE signal. Use your phone to identify the area with the most bars of signal. Typically, the best service will be near a window in the highest floor of your home or office. Make sure a 3G, 4G or 4G LTE icon is displayed on your handset.
PAGE 2
Step 3 Step 4 3 Optimize the Window Unit Placement: The bars on the front of the device indicate the strength of the 3G, 4G or 4G LTE signal in the area. Moving the Window Unit to a different location in your home may increase the signal, and can make a significant difference in the quality of your service. 4 Place the Coverage Unit: Move to a location in your home where you need to improve coverage. Plug the Coverage Unit into an easily accessible outlet.