User Guide i365 by Motorola® www.nextel.com © 2008 Sprint. Sprint and the NEXTEL name and logo are trademarks of Sprint. Other marks are the property of their respective owners.
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 Manual number: NNTN7496A www.hellomoto.com CP Version: 6D.05.05 Note: Do not ship your phone to the above address. If you need to return your phone for repairs, replacement or warranty service, please contact the Motorola Customer Support Center at: 1-800-453-0920 (United States) 1-877-483-2840 (TTY/TDD United States for hearing impaired) Product Support: www.motorola.
FCC Notice to Users The following statement applies to all products that have received FCC approval. Applicable products bear the FCC logo, and/or an FCC ID in the format FCC-ID:xxxxxx on the product label. Motorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. See 47 CFR Sec. 15.21. This device complies with part 15 of the FCC Rules.
Table of Contents Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Your Phone’s Menu. . . . . . . . . . . . . . . . . . . . . . . . ii Use and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Section 1: Getting Started. . . . . . . . . . . . . . . . . . 1 1A. Setting Up Service . . . . . . . . . . . . . . . . .
Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . 81 2C. Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 SIM Card Security . . . . . . . . . . . . . . . . . . . . . . . . . Your Phone’s Lock Feature . . . . . . . . . . . . . . . . . Your Phone’s Keypad Lock . . . . . . . . . . . . . . . . . Resetting Your Phone . . . . . . . . . . . . . . . . . . . . . . GPS Privacy Options . . . . . . . . . . . . . . . . . . . . . . . Java Applications & GPS Security . . . . . . . . . . .
Section 3: Service Features . . . . . . . . . . . . . . 147 3A. Service Features: The Basics . . . . . . . . 148 Message Center . . . . . . . . . . . . . . . . . . . . . . . . . Receiving Messages . . . . . . . . . . . . . . . . . . . . . Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Multimedia Messages . . . . . . . . . . . . . . . . . . . . Text Messaging (SMS) . . . . . . . . . . . . . . . . . . . Caller ID Blocking . . . . . . . . . . . . . . . . . . . . . . .
Introduction This User Guide introduces you to your wireless service and all the features of your new phone. It’s divided into four sections: ⽧ Section 1: Getting Started ⽧ Section 2: Using Your Phone ⽧ Section 3: Service Features ⽧ Section 4: Safety and Warranty Information User Guide Note Because of updates in phone software, this printed guide may not be the most current version for your phone. Visit www.nextel.com and sign in to access the most recent version of the user guide.
Your Phone’s Menu 4: Home Icons 5: Backlight The following table outlines your phone’s menu structure. For more information about using your phone’s menus, see “Navigating Through Phone Menus and Options” on page 17.
10: DTMF Dialing 8: Right Sftkey 11: Prepend 9: Power Up 3: DC/GC Options 5: Volume 1: Tkgrp Silent 6: Security 2: Tkgrp Area 1: Phone Lock 3: One Touch DC 2: Keypad Lock 4: Alert Type 3: SIM PIN 5: On/Off Settings 4: GPS PIN 6: Store Rcvd Info 5: Change Passwds 4: Personalize 7: Advanced 1: Menu Options 1: Reorder Menu 1: Alert Timeout 2: Add/Remove Apps 2: Headset/Spkr 2: Up Key 3: Connectivity 3: Down Key 4: Reset Defaults 4: Left Key 5: Return to Home 5: Right Key 6: Transm
Ring Tones 1: Buy Ring Tones 1: Hands Free 2: Vibrate All 2: Link to Devices 3: < List of Ringtones on Your Phone > 3: Device History 4: Vibrate 4: Setup 5: Silent 5: Find Me Contacts My Info Messages Direct Talk 1: [Create Mesg] 1: Go To Direct Talk 2: Voice Mail 2: Setup 3: Inbox 1: Direct Launch 4: Drafts 2: State Tone 5: Sent Items 3: Help 6: Net Alert VoiceRecord 7: SMS GPS Call Forward Downloads iv Bluetooth 1: Position
2: Privacy 2: Surveillance 3: Interface 3: Standard Datebook 4: Car Memo 5: Meeting Call Timers 6: Office 1: Last Call 7: Outdoors 2: Phone Reset 8: Headset 3: Phone Lifetime 9: PRVT Only 4: DC/GC Reset 10: CONTCS Only 5: DC/GC Lifetime Call Alert 6: Circuit Reset My Pictures 7: Circuit Lifetime Direct Connect 8: Kbytes Reset Recent Calls Shortcuts Please keep in mind that the menu options and order shown here may change as updates become available and as you set your own preferenc
Use and Care To care for your Motorola phone, keep it away from: vi liquids of any kind dust and dirt Don’t expose your phone to water, rain, extreme humidity, sweat, or other moisture. Don’t expose your phone to dust, dirt, sand, food, or other inappropriate materials. extreme heat or cold cleaning solutions Avoid temperatures below -10°C/14°F or above 45°C/113°F. To clean your phone, use only a dry soft cloth. Don’t use alcohol or other cleaning solutions.
Section 1 Getting Started
Section 1A Setting Up Service Setting Up Your Phone 1. Make Sure your SIM card is in Place. 2. Install the battery. ⽧ Setting Up Your Phone (page 2) ⽧ Activating Your Phone (page 3) ⽧ Setting Up Your Voicemail (page 3) ⽧ Enabling Security (page 4) ⽧ Account Passwords (page 4) ⽧ Getting Help (page 5) Setting up service on your new phone is quick and easy.
Your phone’s battery should have enough charge for your phone to turn on and find a signal, set up your voicemail, and make a call. You should fully charge your battery as soon as possible. See “Charging the Battery” on page 12 for details. Activating Your Phone 䢇 䢇 If you purchased your phone at a Nextel Store, it is probably activated and ready to use. If your phone is not activated, please call Nextel Customer Service at 1-800-639-6111 from any other phone.
Enabling Security Account Passwords You must enable security the first time you power on your phone or within ten days of first activation of your phone. With Nextel service, you enjoy unlimited access to your personal account information and voicemail account. To ensure that no one else has access to your information, you need to create passwords to protect your privacy. To enable security: 1. Press W to power on your phone. 2. Press Ok - (right softkey). 3. You are prompted to enable security.
From Your i365 Phone You’ll create your voicemail password (or passcode) when you set up your voicemail. See “Setting Up Your Voicemail” on page 3 for more information on your voicemail password. 䢇 Getting Help 䢇 Setting Up Service Voicemail Password Press *4O to check minute usage and account balance. Press *3O to make a payment. From Any Other Phone 䢇 䢇 Nextel Customer Service: 1-800-639-6111. Business Customer Service: 1-800-390-9545 Managing Your Account Operator Services Online: www.nextel.
01b_Phone Basics.fm Page 6 Friday, June 27, 2008 4:08 PM Section 1B Your Phone Phone Basics 17. Antenna 1. Speaker Button ⽧ Your Phone (page 6) ⽧ Getting Started With Your Phone (page 8) ⽧ Features of Your Phone (page 15) ⽧ Navigating Through Phone Menus and Options (page 17) ⽧ Displaying Your Phone Number and Direct Connect Number (page 19) 16. Smart Button 2. Volume Button 3. Direct Connect Button 15. Display Screen 14. Headset Jack 4. Softkey (Left) 13.
01b_Phone Basics.fm Page 7 Friday, June 27, 2008 4:08 PM 1. Speaker Button lets you place or receive calls in speakerphone mode. 2. Volume Button allows you to adjust the ringer volume in standby mode or adjust the voice volume during a call. The volume key can also be used to scroll up or down to navigate through the different menu options. 3. Direct Connect Button allows you to use Nextel Direct Connect on your Nextel phone. (See “Making and Answering Direct Connect Calls” on page 36.) 4.
01b_Phone Basics.fm Page 8 Friday, June 27, 2008 4:08 PM 14. Headset Jack allows you to plug in either a stereo headset (included) or an optional headset for convenient, hands-free conversations. WARNING Inserting an accessory into the incorrect jack may damage the phone. 15. Display Screen provides information about your phone’s status and options. 16. Smart Button allows you to access special functions. 17. Antenna delivers the best receiption when fully extended.
01b_Phone Basics.fm Page 9 Friday, June 27, 2008 4:08 PM Important To avoid losing information stored in your SIM card, do not remove it from your phone unless absolutely necessary. To insert your SIM card: 1. With your phone powered off, remove the battery Phone Basics Removing and Inserting the SIM Card door and battery. See “Removing the Battery” on page 11. 2. With your fingers, carefully slide the SIM card into To remove your SIM card: your phone until it lies flat in the SIM card holder. 1.
01b_Phone Basics.fm Page 10 Friday, June 27, 2008 4:08 PM Using Your Phone’s Battery and Charger WARNING Use only Nextel-approved or Motorolaapproved batteries and chargers with your phone. The failure to use a Nextel-approved or Motorola-approved battery and charger may increase the risk that your phone will overheat, catch fire, or explode, resulting in serious bodily injury, death, or property damage.
01b_Phone Basics.fm Page 11 Friday, June 27, 2008 4:08 PM phone 3. Insert the battery into the opening, making sure the connectors align. Gently press down to secure the battery. 4. Replace the battery cover and press down until you hear a click. Phone Basics 2. Remove the battery cover from the back of the 5. Turn the release tab clockwise to lock. Removing the Battery 1. Make sure the power is off so that you don’t lose any stored numbers or messages. 2.
01b_Phone Basics.fm Page 12 Friday, June 27, 2008 4:08 PM Charging the Battery Charge your battery as soon as possible so you can begin using your phone. Keeping track of your battery’s charge is important. If your battery level becomes too low, your phone automatically turns off, and you will lose any information you were just working on. For a quick check of your battery level, glance at the battery charge indicator located on your display screen.
01b_Phone Basics.fm Page 13 Friday, June 27, 2008 4:08 PM Important Battery Use and Battery Safety 䢇 Motorola recommends you always use Motorola-branded batteries and chargers. The warranty does not cover • Remove the battery and inspect it to confirm that it bears a Motorola “Original Equipment” hologram; damage caused by non-Motorola batteries and/or chargers.
01b_Phone Basics.fm Page 14 Friday, June 27, 2008 4:08 PM 䢇 䢇 䢇 It is normal for battery life to decrease over time, and for the battery to exhibit shorter runtime between charges or require more frequent or longer charging times. Avoid damage to battery and mobile device. Do not disassemble, open, crush, bend, deform, puncture, shred, or submerge the battery or mobile device. Avoid dropping the battery or mobile device, especially on a hard surface.
Features of Your Phone The i365 is durable, easy to use, and reliable, and it offers many features and service options. This list previews some of those features and provides page numbers where you can find out more: 䢇 Nextel Direct Connect provides instant, coast-to-coast 2-way “walkie-talkie-style” communication at the click of a button (page 36). 䢇 Nextel Direct Talk allows for two-way radio communication “off the network” between two or more phones equipped with this capability (page 53).
01b_Phone Basics.fm Page 16 Friday, June 27, 2008 4:08 PM abc Battery Strength — A fuller battery indicates a def greater charge. gd B Bluetooth In Use — Your phone is using Bluetooth. If this icon is blinking, then your phone is in discoverable mode. If this icon is static, your phone is active in a Bluetooth connection. 12 Active Phone Line — 1 indicates phone line 1 is ready to make calls; 2 indicates phone line 2 is ready to make calls. GLI Call Forward — Your phone is set to forward calls.
01b_Phone Basics.fm Page 17 Friday, June 27, 2008 4:08 PM TUV Text Input — You are using one of the phone’s text entry methods. See “Selecting a Text Input Mode” on page 20. WX DE Internet — You are ready to browse the 9 Transmitters — Your phone is set not to YZ NO Internet or are browsing the Internet using a secure connection. See “Data Services” on page 191. receive calls and other transmissions. See “Temporarily Turning Off Transmissions (Airplane Mode)” on page 74.
01b_Phone Basics.fm Page 18 Friday, June 27, 2008 4:08 PM Tip When scrolling through the main menu, it may be necessary to select More to view additional main menu options. Depending on which menu view you’re using, either highlight More and press r or press More - (right softkey). Backing Up Within a Menu To go to the previous menu: 䊳 Press Back - (right softkey). To return to standby mode: Selecting Menu Items As you navigate through the menu, menu options are highlighted.
read the text for a quick overview of the feature. For more information, refer to this guide. Displaying Your Phone Number and Direct Connect Number My Info lets you view your phone number, Direct Connect number, and other phone information. To view information about your phone: 1. Press M > My Info. Note You may need to select More to display My Info. 2. Press r. 3. Scroll to see your information: 䡲 My Name — You can enter your name here.
01b_Phone Basics.fm Page 20 Friday, June 27, 2008 4:08 PM Editing My Info Entering Text You can edit My Info to enter or change the text that appears in My Name. Selecting a Text Input Mode 1. Press M > My Info. 3. Select Name. Your phone provides convenient ways to enter letters, numbers, and symbols whenever you are prompted to enter text (for example, when adding a Contacts entry or when composing text and multimedia messages). 4. Enter the name you want to appear.
01b_Phone Basics.fm Page 21 Friday, June 27, 2008 4:08 PM Tip Insert QuickNotes to enter preset messages. [You can also access Quick Notes by pressing QNotes - (left softkey) when beginning a message. (See page 23).] When entering text, press the * (Shift) key to change letter capitalization (ABC > Abc > abc). Entering Text Using Word Text Input Word Text Input (T9) lets you enter text by pressing keys just once per letter.
01b_Phone Basics.fm Page 22 Friday, June 27, 2008 4:08 PM Entering Text Using Alpha Mode 1. Select the Alpha mode. (See “Selecting a Text Input Characters scroll in the following order: Key Mode” on page 20.) 2. Press the corresponding keys repeatedly until the correct letter appears. (For example, to enter the word “Bill,” press 2 twice, 4 three times, 5 three times, and 5 three times again.) (If you make a mistake, press Delete - [left softkey] to erase a single character.
01b_Phone Basics.fm Page 23 Friday, June 27, 2008 4:08 PM To enter numbers: 䊳 Select the Numeric mode and press the appropriate key. (See “Selecting a Text Input Mode” on page 20.) To enter symbols: 䊳 Select the Symbols mode. (See “Selecting a Text Input Mode” on page 20.) To enter a symbol, press the appropriate key indicated on the display. To enter Quick Notes: 1. From a text entry screen, press QNotes - (left softkey). (See “Selecting a Text Input Mode” on page 26.) 2.
01b_Phone Basics.fm Page 24 Friday, June 27, 2008 4:08 PM These icons appear: R or U S or V Caps lock is on. When none of these icons appear, letters typed are lowercase. Scrolling up after typing a letter makes that letter uppercase. Note When creating a text message, you may not be able to make a letter uppercase by scrolling up, depending on the type of text message and the text entry mode. Your phone automatically makes the first letter of a sentence uppercase.
01b_Phone Basics.fm Page 25 Friday, June 27, 2008 4:08 PM Phone Basics Using a Remote Direct Connect Button If you are using a headset or other optional accessory with a remote Direct Connect button, you can use the remote Direct Connect button for phone calls, Direct Connect calls, and Group Connect calls. For phone calls, use the remote Direct Connect button to answer calls, switch between calls, and end calls.
01b_Phone Basics.
Section 2 Using Your Phone
Section 2A Types of Calls Making and Answering Calls With the Nextel National Network, Nextel Direct Connect, and your i365 phone, you have the following traditional wireless phone and Nextel Direct Connect services available to you: 䢇 Digital Wireless Phone Calls offer clear calls and many extra services, including missed call notification, Three-Way Calling, speakerphone, and speed dialing (page 29).
Talkgroup Calls allow two-way radio calling to up to 100 Nextel Talkgroup customers simultaneously (page 51). Note 䢇 To learn more about the differences between Nextel Group Connect calls and Talkgroup calls, please see “Difference Between Group Connect and Talkgroup Calls” on page 51. Nextel Direct Talk allows for two-way radio communication “off the network” between two or more phones equipped with this capability (page 53).
If the incoming call is from a number stored in your Contacts, the entry’s name is displayed. The caller’s phone number may also be displayed, if available. Note When your phone is off, calls go directly to voicemail. Ending a Call 䊳 To end a call press o. Missed Call Notification When an incoming call is not answered, the Missed Call log is displayed on your screen. To display the Missed Call entry from the notification screen: 䊳 Press View - (left softkey).
Important Always report your location to the 911 operator when placing an emergency call. Some designated emergency call takers, known as Public Safety Answering Points (PSAPs) may not be equipped to receive GPS location information from your phone. Emergency calls cannot be placed while the keypad is locked. If you have not registered on the network, emergency calls cannot be placed while your SIM card is in your phone.
End-of-Call Options 䢇 Contacts to display your Contacts list. 䢇 Recent Calls to display Recent Calls list. 䢇 My Info to display your phone’s Information. 䢇 Memo to display the phone’s electronic notepad. After you receive or make a call, the phone number and the call duration are briefly displayed. You are then automatically taken to the Recent Calls list. 䢇 Datebook to enter a datebook event. To save a number that is not in your contacts: 䢇 Messages to create a message.
Your phone can store up to 12 phone numbers in each of 600 Contacts entries. Each entry’s name can contain 20 characters. Your phone automatically sorts the Contacts entries alphabetically. (For more information, see “Contacts” on page 99.) 1. Enter a phone number and press M. 2. Select Store Number and press r. 3. To store the number as a new entry, select [New Contact] and press r to add the new entry. – or – Search for an existing contact name and press r to save the new number. 4.
To dial or save phone numbers with pauses: 1. Enter the phone number. 2. Press and hold * until the letter P appears. The P represents a three-second pause. If you want a pause longer than three seconds, press and hold * more than once. Each P represents a threesecond pause. Dialing From the Contacts List 1. Press M> Contacts. Shortcut 2. Select the entry you want to call and press O to dial the entry’s default phone number. – or – – or – Press and hold * until the letter W appears.
3. To place the call now, press O. – or – Scroll left or right to display the number type you want to call. When the correct number is displayed, press O to place the call. To make calls while viewing the details of an item on the Recent Calls list: Making a Phone Call Using a Voice Name If you have created a voice name in Contacts for the number you want to call (see page 102), say the voice name into your phone to enter the number. 1.
To use speed dial for locations 10–600: 1. Enter a speed dial number and then press #. 2. Press O to dial the number. Making and Answering Direct Connect Calls Nextel offers the following Direct Connect services: 䢇 Nationwide Direct Connect allows coast-to-coast Direct Connect calling to Nextel subscribers to and from anywhere on the Nextel National Network (U.S.). 䢇 International Direct Connect allows Direct Connect calling to and from select countries.
Note The number of digits in each part of a Direct Connect number may vary. For example, your Direct Connect number may be formatted as 999*999*9999, while another valid number may appear as 555*555555*55. If you are calling or saving a Direct Connect number for a Sprint phone with Direct Connect capabilities, the Direct Connect number may be the same as the wireless phone number. When saving the Direct Connect number, insert asterisks in place of hyphens (913*555*1234).
Making Direct Connect Calls From Recent Calls If you have numbers stored in the Recent Calls list, you can use these numbers to make calls. For information on the Recent Calls list, see “Recent Calls” on page 93. 1. Press M > Recent Calls. 2. Scroll to the item containing the Direct Connect number you want to call. 3. Press and hold the Direct Connect button. To make calls while viewing the details of an item on the Recent Calls list: 1.
Making Group Connect Calls Making Calls A Direct Connect call ends automatically after there is no activity on the call for several seconds. 1. From Contacts or the Recent Calls list, scroll to or Making and Answering Group Connect Calls A Group Connect call is similar to a Direct Connect call to one user, but is made to multiple Direct Connect subscribers at once. You can create Groups from your phone and call up to 20 other Group Connectcompatible phones* anywhere on the Nextel National Network.
Answering Group Connect Calls 䊳 Proceed as if answering a Direct Connect call from one user. Only one person at a time may speak on a Group Connect call. Creating Groups in Contacts 1. Press M > Contacts. 2. Select [New Group]. 3. If you want to assign a name to the Group, enter the name. Note If you do not assign a name, the Group is named “Group” followed by the number of members in the Group. For example, “Group (8)” for a group with eight members. 4. Add Group members.
Note To deselect a member, scroll to a selected member and press r. 3. Press Done - (left softkey) and then press Save (left softkey) to save the group. To add Group members manually from the keypad: 1. While creating a Group, select [Add Number]. 2. Enter the Direct Connect number using the keypad. 3. Press r and then press Save - (left softkey) to save the group. Starting a Group Connect Call With a Direct Connect Number 1.
Removing Members or Groups To remove a member from a Group: 1. From Contacts, scroll to the Group you want to delete the member from. 2. Press Edit - (left softkey). 3. Scroll to the member you want to remove. 4. Press M. 5. Select Remove Member. 6. Press Save - (left softkey). To remove all members from a Group: 1. From Contacts, select a Group. 2. Press Edit - (left softkey). 3. Press M. 4. Select Remove All. 5. Press Yes - (left softkey). To delete a Group from Contacts: 1.
You cannot record a voice name during an active call. 4. Press Save - (left softkey). To store a member from an active Group Connect call: 1. During an active Group Connect call, press M. 2. Press M. Storing Members of Groups 3. Select Store Number. To store a member from the Recent Calls list or within Contacts: 4. Select the number or member you want to store. 1. Display the Group containing the number or member you want to store. 2. Press M. 3. Select Store Number. 4.
Group Connect Call Details During a Group Connect call, you can view details about the other group members, such as their name or Direct Connect number, and their status on the call. To view Group Connect call details: 䊳 Press Details - (left softkey). In the Details view, these icons appear next to member names or Direct Connect numbers: T The member of the Group who is speaking. A A member of the Group who is active on the Group Connect call, but not speaking.
You cannot talk or listen on a Direct Connect call while a picture is being transmitted. Other activities, such as searching for a picture, do not prevent you from talking or listening. Starting a Call by Sending a Picture To send a picture during a call: To do this, you must have the Direct Connect number and IP address of the person you want to send to stored in your Contacts. softkey). A list of pictures that can be included in a Direct Connect call appears. 2. Select the picture you want to send.
5. Press the Direct Connect button to send the picture. 6. Wait while the picture is transmitted. The Direct Connect call is temporarily interrupted while a picture is transmitted. Accepting a Picture 1. When you see the message asking you if you want to accept the picture, press Yes - (left softkey). 2. Wait while the picture is transmitted. The Direct Connect call is temporarily interrupted while a picture is transmitted. 7.
Sending My Info To turn your phone’s ability to send and receive pictures in Direct Connect calls on or off: You can control what portion of the information in My Info is sent and whether it is sent automatically in every Direct Connect call or only when you choose to send it. 1. Press M > Settings > DC/GC Options > On/Off Settings. 2. Select Pictures and press r to check or uncheck the box. 3. Press Done - (left softkey) to save the setting.
4. A checkmark appears next to the fields that will be sent. To add or remove the checkmark, select the field. 5. When you are finished, press Done - (left softkey). To control whether your information is sent automatically: 1. Press M > My Info. 2. Press M. 3. When Ready to Send appears on the display, press the Direct Connect button to send the information. To start a call by sending My Info: 1. Press M > My Info. 2. Press M. 3. With Direct Send My Info highlighted, press r. 4.
1. While in a Direct Connect call, press M. 2. Select Contacts. 3. Scroll to the Contacts entry you want to send and do the following: 䡲 If the Contacts entry you scrolled to is a Group, press M and select Send Group. If prompted, press Yes - (left softkey) to allow yourself to be part of the group being sent. 䡲 To send a Contacts entry that is not a Group, press M and select Send Via... > Send Via PTT. 4.
To view the information while still in the Direct Connect call: 1. Press M. 2. Select View Contact. You can also view My Info from other phones on the Recent Calls list. See “Sending My Info and Contact Information” on page 47. Sending Groups Using Direct Send You can send a Group using Nextel Direct Send so that the person who receives the Group can use the list. To send a Group from the Recent Calls list: 1. From Recent Calls, scroll to the Group you want to send and press M. 2. Select Send Group. 3.
If you choose to include yourself and the Group already contains 20 members, you will be prompted that the list is full. You will be excluded from the list. 4. Select Send via PTT. 5. Use the keypad to enter the Direct Connect number you want to send the contact to. – or – Press Browse - (left softkey). Select Contacts, Recent Calls, or Memo. Select the number you want to enter. 6. When Ready to Send appears on the display, press the Direct Connect button to send the contact information.
Group Talkgroup Group Icons S I Geography Nationwide Limited to local market and network (fleet) Maximum Group Size 21 (including originator) 100 Set-up Dynamically, Predefined, via via your phone Nextel administrator using Talkgroup Management Voice Activated Yes Dialing No Joining a Talkgroup To participate in a Talkgroup, the account administrator must first add you to the membership and then you must “join” the Talkgroup. 1. Press Contacts - (right softkey). 2.
1. Press # and then enter the Talkgroup number Making and Answering Direct Talk Calls using the keypad. – or – Select the Talkgroup from Contacts or the Recent Calls list. 2. Press the Direct Connect button and continue as if making a Direct Connect call. Receiving Talkgroup Calls 䊳 Answer it as you would a regular Direct Connect call. Only one person at a time may speak on a Talkgroup call.
The following features are not available while in Direct Talk mode: 䢇 On-network phone calls. 䢇 On-network Direct Connect, Group Connect, Talkgroup calls, and Call Alerts. 䢇 Data services. 䢇 Sending and receiving messages. 䢇 Call timer. 䢇 Sending Call Alerts. 䢇 Call forwarding. Setting Your Phone to Direct Talk Before you and another caller can use Direct Talk, both of your phones must be set to Direct Talk mode. 1. Press M > Direct Talk. 2. Select Go To Direct Talk.
5. Select a code. 6. Press Back - (right softkey) to return to the Direct Talk standby screen. Making and Receiving Code Calls in Direct Talk Mode To make a Code call using Direct Talk: 䊳 In Direct Talk mode, press and hold the Direct Connect button. Your phone displays Transmitting, along with the channel and code selected. The tone emitted from your phone when making a Direct Talk call is four beeps and sounds different from the tone heard on Direct Connect calls conducted on the network.
2. Make the call in the same way you make a regular Receiving a Private Direct Talk Call The number or name of the person who initiated the call appears on your display screen. Answer the call in the same way you answer a regular Direct Connect call. A Private Direct Talk call ends a short time after the last party releases the Direct Connect button. The display screen returns to Direct Talk standby mode. Note You do not need to set your phone to Private Only to receive Private calls.
Call Alerts 1. In Direct Talk mode, press Edit - (left softkey). 2. Select Code. 3. Select Receive All. 4. Press Back - (right softkey) to return to the Direct Talk standby screen. Sending a Call Alert lets the recipient know you want to talk to him or her on a Nextel Direct Connect call. When you send a Call Alert, the recipient’s phone alerts them and displays your name or Direct Connect number. Sending Call Alerts Making Emergency Calls While in Direct Talk Mode 1.
Responding to a Call Alert Note You can set a distinctive ringer for Call Alerts. See “Ring Tones” on page 65. To answer a Call Alert: 䊳 Press the Direct Connect button to make a Direct Connect call to the sender. To clear a Call Alert: 䊳 Press Clear - (right softkey). To store a Call Alert in the Call Alert queue: 䊳 Press Queue - (left softkey). Note 58 The Recent Calls list also stores Call Alerts you have received. They appear as Direct Connect calls.
Deleting Call Alerts After you queue a Call Alert, you can respond to it by making a Direct Connect call to the sender or sending a Call Alert to the sender. To delete a Call Alert from the queue: To make a Direct Connect call to the sender: 1. Press M > Call Alert. 2. Scroll to the Call Alert you want to respond to. 3. Press the Direct Connect button to begin the call. This removes the Call Alert from the queue. To send a Call Alert to the sender: 1.
Section 2B Using the Settings Menu Settings Settings contains many submenus that let you customize your phone. To access the Settings menu and submenus: ⽧ Using the Settings Menu (page 60) ⽧ Sound Settings (page 65) 1. Press M > Settings. ⽧ Display Settings (page 70) 2. Select the submenu you want.
䢇 䢇 䢇 䢇 Clock — controls whether the time and date appear in standby mode; sets time and date format; sets year. Menu View — controls whether the items on your main menu and Java applications menu appear as large icons or a list. Large Dialing — sets large digits to appear in standby mode when you enter a number. Status Light — allows you to turn the status light on and off. Language — sets the language that your phone displays.
䢇 Prepend — lets you specify a prefix, such as a country code for international calls, to be automatically added to phone numbers you dial. DC/GC Options Features The DC/GC Options menu controls how your phone handles Direct Connect calls, Group Direct calls, and Talkgroup calls: 䢇 Tkgrp Silent — controls whether you hear your Talkgroup calls. 䢇 Tkgrp Area — lets you define your Talkgroup area. 䢇 One Touch DC — sets One Touch Direct Connect.
䢇 䢇 Left Sftkey — sets the main menu item you access when you press the left softkey in standby mode. Right Sftkey — sets the main menu item you access when you press the right softkey in standby mode. Power Up — sets the main menu item you see when you power on your phone. To set standby mode to be the first thing you see when you power on your phone, select Default Ready. Volume Features The Volume menu sets the volume of sounds your phone makes: 䢇 Line 1 — sets ringer volume for phone line 1.
䢇 䢇 GPS PIN — enables and disables your phone’s GPS PIN security feature. See “Setting the GPS PIN Security Feature” on page 90. Change Passwds — changes your phone unlock code, security code, SIM PIN, and GPS PIN. Advanced Features The Advanced menu contains advanced Settings features. 䢇 Alert Timeout — sets the amount of time a tone continues to sound and the logo backlight continues to flash when you receive a message notification, Call Alert, or Datebook reminder.
Ring Tones Ringer types help you identify incoming calls and messages. You can assign ringer types to individual Contacts entries, types of calls, and types of messages. Selecting Ringer Types Your phone provides a variety of ringer options that allow you to customize your ring and volume settings. These options allow you to identify incoming calls by the ring. 1. Press M > Ring Tones. 2. Scroll through the list of ring tones. A sample 4.
Assigning a Ring Tone to a Contact Vibrate Settings You can also assign a ringer to a specific contact entry so you know who's calling without looking at the phone. Vibrate All 1. Press M > Ring Tones. The Vibrate All option allows you to mute all sounds without turning your phone off. 2. Scroll through the list of ring tones and select the To activate Vibrate All: one you want to assign. A sample ringer will sound as you highlight each option 3. Press r or press Assign - (left softkey). 4.
1. Press and hold the volume key up to unlock vibrate all. 2. Press the volume key up repeatedly to select a volume level. – or – Press M > Ring Tones> Vibrate All. Set this option to Off. These icons indicate how the ringer is set: Ring and Vibrate To set your phone to ring and vibrate when you receive phone calls or Call Alerts: Settings To deactivate Vibrate All: 1. Press M > Ring Tones. 2. Make sure Vibrate All is set to Off. 3.
To deactivate Silence All: 䊳 Press the volume key up repeatedly to select a volume level. To set your phone to vibrate instead of making a sound for some features but not others: 1. Press M > Ring Tones. 2. Make sure Vibrate All is set to Off. 3. Select Vibrate from the list of ring tones. 4. Select the features you want to set to make no sound. 5. When you are finished, press Done - (left softkey).
Deleting Custom Ring Tones To view the amount of memory available for custom ring tones: Deleting a ring tone from the list of ring tones deletes it from your phone. Deleting custom ring tones frees memory. Except for DRM ring tones, if you delete a ring tone that you purchased from your phone, you will have to purchase it again. Under certain conditions, some DRM vendors will not charge you if you download an item multiple times within a given time frame.
Adjusting the Phone’s Volume Settings Display Settings Adjust your phone’s volume settings to suit your needs and your environment. Changing the Backlight Time Length 1. Press M> Settings > Volume. 2. Select Line 1, Line 2, Messages, Earpiece, Speaker, Keypad, Java Earpiece, Java Spkr or Data. 3. Using the navigation key, choose a volume level and press r. Tip You can adjust the ringer volume in standby mode (or the earpiece volume during a call) by using the volume key on the left side of your phone.
view it. Press Back - (right softkey) to return to the available images. 4. Press r to assign an image. Setting Wallpaper to Change Automatically When you set your wallpaper to change automatically, your phone uses each of the pictures in My Pictures as wallpaper, cycling through them at a pace you choose. 1. Press M > Settings > Display/Info > Wallpaper > Auto Cycle. 2. Select how often you want the wallpaper to change. 䡲 List to display the menu as a list.
Changing the Text Size Adjust the font when entering text (for example, when using the notepad or when adding a Contacts entry). 1. Press M > Settings > Display/Info > Text Size. 2. Select Zoom, Standard, or Compressed and press r. Messaging Settings Staying connected to your friends and family has never been easier. With your phone’s advanced messaging capabilities, you can send and receive many different kinds of text messages without placing a voice call.
3. Choose a clean-up option. To add a new preset message: 1. Press M > Messages > M > Setup > Quick Notes or Replies. (The list of preset messages will be 4. To automatically delete messages now, press r or press Yes - (left softkey). displayed.) – or – 2. To add a new message, press New - (left softkey) To delete messages later, press No - (right softkey). 3. Enter your message (see “Entering Text” on or select [New Quicknote]. page 20), and press r.
Temporarily Turning Off Transmissions (Airplane Mode) Sometimes you may want to have your phone on, but turn off its ability to make and receive calls and other transmissions. To set your phone so that it cannot make or receive phone calls, Direct Connect calls, Group Connect calls, Talkgroup calls, or transfer data: 1. Press M > Settings > Advanced > Transmitters. 2. Set this option to Off. 3. Press Yes - (left softkey).
To set your phone to call a Direct Connect number you choose: 1. Press M > Settings > DC/GC Options > One Touch DC > Assigned No. 2. Enter the Direct Connect number you want your phone to call every time you press the Direct Connect button. 䡲 Enter the number using your keypad. – or – 䡲 Press Search - (left softkey). Select Contacts, Recent Calls, or Memo. Select the number you want to enter. Tip To set your phone to send your phone’s information: 1. Press M > Settings > DC/GC Options > One Touch DC.
Headset Options Profiles To set your phone to send incoming sound to a headset only, or to a headset and a speaker at the same time: A profile is a group of settings saved together so that you can apply them to your phone easily. 1. Press M > Settings > Advanced > Headset/Spkr. A profile contains these settings: 䢇 Ring Tones — sets all options described in “Ring Tones” on page 65, except assigning ring tones to Contacts. 䢇 Display/Info — sets Wallpaper, Theme, Text Size, and Backlight options.
How Changing Settings Affects Profiles To view the profiles stored in your phone: Many of the settings contained in profiles can be set without switching or editing profiles — for example, by selecting Settings or Ring Tones to set options, or by setting the volume of the phone’s ring using the volume controls. 1. Press M > Profiles. 2. Scroll to the profile you want to view. 3. Press View - (left softkey). Tip The profile that is currently in effect on your phone has a checkmark next to it.
To set your phone to update the profile in effect to reflect any changes you make to settings: 䊳 Set Temp Profile to Off in step 4 above. Temporary Profiles Storing a Temporary Profile To store a temporary profile as a new profile: 1. Press M > Profiles. 2. Scroll to the temporary profile. If your phone is set to create temporary profiles, a temporary profile is created when you make changes to settings without switching or editing profiles. 3. Press M.
Editing Profiles 1. Press M > Profiles. 1. Press M > Profiles. 2. Select [New Profile]. 2. Scroll to the profile you want to edit. – or – 3. Press M. Scroll to any profile, press M, and then select New. 4. Select Edit. 3. Enter the name you want to give the profile. When you are finished, press r. 4. If you want to base this profile on an existing profile, select Copy From and then select the profile you want to base this profile on.
To delete all profiles: 1. Press M > Profiles. 2. Press M. 3. Select Delete All. 4. Press r or press Yes - (left softkey) to confirm. Setting Call Filtering The call filtering setting in each profile lets you control which calls, Call Alerts, and message notifications your phone notifies you of, and which it ignores. 1. While setting options for a profile, select Call Filter. 2. Select a filtering option 䡲 Phone – sets filtering options for phone calls.
Notifications – sets filtering options for message notifications. ● Off – sets your phone to notify you of all messages. ● Voice Messages – sets your phone not to sound a tone or vibrate when you receive voice messages. ● Text Messages – sets your phone not to sound a tone or vibrate when you receive text messages. ● All – sets your phone not to sound a tone or vibrate when you receive any message.
3. Press r or press Yes - (left softkey). Using a Shortcut 4. Select Key. To use a shortcut if you know the shortcut number: 5. Press the number key you want to assign to the shortcut and press r. 6. If you want to record a voice name for the shortcut, select Voice. As directed by the screen prompts, say and repeat the name you want to assign to the number. Speak clearly into the microphone. 7. Press Done - (left softkey). 8.
Deleting Shortcuts 4. Scroll to the shortcut you want to move. To delete a shortcut: 5. Press Grab - (left softkey). 1. Press M > Shortcuts. 6. Scroll to the place where you want the shortcut to 2. Scroll to the shortcut you want to delete. appear. 7. Press Insert - (left softkey). 8. Repeat step 4 through step 7 for all the items you want to move. 9. Press Done - (right softkey). To change the number or voice name assigned to a shortcut: Settings 3. Select Reorder. 3. Press M. 4. Select Delete.
Call Answer Mode Display Language Select how to answer incoming calls on your phone: whether you want to be required to press O or to press any number key. You can choose to display your phone’s on screen menus in English, French, or Spanish. 1. Press M > Settings > Phone Calls. 2. Select an option and press r. 䡲 Any Key Answer: Press r and select On to allow an incoming call to be answered by pressing any key. – or – Select Off to require O to be pressed to answer all incoming calls.
Security SIM Card Security Important Security Section 2C Except for making emergency calls, your phone does not function without the SIM card. ⽧ SIM Card Security (page 85) SIM Card’s PIN ⽧ Your Phone’s Lock Feature (page 87) ⽧ Your Phone’s Keypad Lock (page 87) ⽧ Resetting Your Phone (page 88) ⽧ GPS Privacy Options (page 89) ⽧ Java Applications & GPS Security (page 90) You can protect access to your phone by using the SIM card’s PIN (Personal Identification Number).
Entering the PIN 1. Turn on your phone. 2. When the SIM PIN screen appears, enter your SIM PIN and press Ok - (left softkey). Important If you enter your PIN incorrectly three times, your SIM card is blocked. See “Unblocking the PIN” on page 86 Changing the PIN 1. Press M > Settings > Security > Change Passwds > SIM PIN. 2. Enter the current SIM PIN and press Ok - (left softkey). 3. Enter the new SIM PIN and press Ok - (left softkey). 4. Reenter the new SIM PIN to confirm. 5.
Your Phone’s Lock Feature 2. Select Unlock Code, and then enter your current Locking Your Phone 3. Enter and reenter your new lock code, pressing 1. Press M > Settings > Security. 2. Select Phone Lock > Lock Now, enter the unlock code, and press Ok - (left softkey). (To set your phone to lock the next time it is turned on, select Auto Lock.) Unlocking Your Phone 䊳 At the “Enter Unlock Code” prompt, enter your unlock code and press Ok - (left softkey). Changing the Lock Code 1.
To lock the keypad: 1. From standby mode, press M. 2. Press *. If you press a key while the keypad is locked, instructions for unlocking the keypad display briefly. The keypad can be set to lock in 30 seconds or in 1, 5, 10, 15, or 20 minutes if the keypad is not touched during the specified time. To turn the auto lock off, repeat step 3 and select Off. Resetting Your Phone To unlock the keypad: 1. From standby mode, press M. 2. Press *.
complete the reset. (Press No - [right softkey] to cancel.) Resetting All Selecting Reset All resets phone settings and clears all phone data, including Contacts History, Scheduler, and Messaging. GPS Privacy Options Your phone’s GPS privacy options control whether Java applications or other software applications on your phone may view the location of your phone. You may set your phone to one of these GPS privacy options. Note 1. Press M > Settings > Advanced > Reset Defaults > Reset All. 2.
䡲 Ask Access — When an application attempts to view the location of your phone, you will be prompted to give permission. However, location information may still be available to the phone’s owner, fleet manager, or account administrator. Setting the GPS PIN Security Feature To prevent your GPS privacy settings from being altered without your knowledge, your GPS privacy option can be protected by a PIN.
These options control the privacy of all Java applications on your phone: 䢇 Restricted — No Java or similar software applications may access the location of your phone. However, location information may still be available to the phone’s owner, fleet manager, or account administrator. 䢇 Unrestricted — All Java applications may access the location of your phone, without notifying you. 䢇 By Permission — When a Java application attempts to access the location of your phone, you are prompted to give permission.
To grant this request: 1. Press Grant - (left softkey). The application accesses your phone’s location. 2. Select the granting option you want: Always — If the application requests access to the location of your phone again, the request is granted without notifying you. 䡲 For this session — If the application requests access to the location of your phone again before you power off your phone, the request is granted without notifying you.
About Recent Calls Recent Calls The Recent Calls list displays the last 20 numbers (or Contacts entries) for calls you placed, accepted, or missed, and for Call Alerts you have received. It also displays My Info and contact information sent to you from other phones. It is continually updated as new numbers are added to the beginning of the list and the oldest entries are removed from the bottom of the list.
When you select a call to view its details, you see information such as the name associated with the call, the number, date, time, and duration of the call. Note The Direct Connect number Contacts type icon appears when you receive a Direct Connect call or Call Alert, even if the number is not stored in Contacts. The Recent Calls list records only calls that occur while the phone is turned on. If a call is received while your phone is turned off, it will not be included in the phone’s Recent Calls list.
When you select My Info from other phones to view its details, you see all the information sent. If you receive My Info from the same phone more than once, only the most recently sent version appears in the Recent Calls list. Contact Information From Other Phones The Recent Calls list displays contact information sent from other phones. This information comes from the other phone’s Contacts list or Recent Calls list. See “Sending My Info and Contact Information” on page 47.
Viewing Recent Calls Note The Recent Calls list records only calls that occur while the phone is turned on. If a call is received while your phone is turned off, it will not be included in the phone’s Recent Calls list. If you return a call from the voicemail menu, it will not be included in your phone’s Recent Calls list. To view the Recent Calls list: 1. Press M > Recent Calls. 2. Scroll through the list.
1. Press M > Recent Calls. 2. Select an entry and press O. – or – Press the Direct Connect button to make a Direct Connect or Group Connect call. Note You cannot make calls from Recent Calls to entries identified as No ID or Restricted. 3. Select [New Contact] to create a new Contacts entry for the number – or – To store the number to an existing entry, select the entry.
Deleting Items From Recent Calls Prepending a Phone Number From Recent Calls To delete an item from the Recent Calls list: 1. From the Recent Calls list, scroll to or select the item you want to delete. 2. Press M and select Delete. 3. Press or r press Yes - (left softkey) to confirm. To delete all items on the Recent calls list: 1. Press M > Recent Calls > M. 2. Select Delete All. 3. If you are certain you want to erase the History, press Yes - (left softkey).
About Contacts Contacts Contacts stores up to 600 numbers or addresses. Each Contacts entry can store several numbers or addresses.
Types of Contacts Note Each number or address stored must be assigned a Contacts type: A Mobile phone number B DC Direct Connect number C Work1 phone number D Work2 phone number E Home phone number F Email email address G Fax phone number H Pager phone number I Talkgroup Talkgroup number K Scangroup Group S Group Group J IP IP address ( Other phone number 100 Section 2E. Contacts The i365 does not support the Scangroup feature.
To create a Contacts entry: 1. Press M > Contacts > [New Contact]. – or – Press M > Contacts > M > New Contact. 2. If you want to assign a name to the entry: 䡲 Tip Select Name. Enter the name. When you are finished, press r. Press Browse - (left softkey) to select a name already in Contacts. 䡲 5. To store a number or address: Select the # field (or ID for an email address, or IP for an IP address). 䡲 Enter the number or address. For phone numbers, use the ten-digit format.
6. If you want to assign more options to the number, including Speed # and Voice Name, select [Options] and proceed to steps 7-9. Otherwise, skip to step 10. 7. The default Speed Dial number assigned to a phone number is displayed in the Speed # field. This is always the next available Speed Dial location. If you want to assign the phone number to a different Speed Dial location: 䡲 With the Speed # field highlighted, press r. 䡲 Press Delete - (right softkey) to delete the current Speed Dial number.
Storing Numbers Faster Viewing Contacts 1. Use the keypad to enter the number you want to store. 2. Press M. 1. Press M > Contacts, and then scroll to the entry you want to view. – or – 3. Select Store Number. Enter the first letter of a name (such as “d” for “Dave”). 4. To store the number as a new entry, select – or – [New Contact]. – or – To store the number to an existing entry, select the entry. 5.
Showing Only Direct Connect Numbers, Groups, and Talkgroups To set Contacts to show only entries that contain Direct Connect numbers, Groups, and Talkgroups: 1. Press M > Contacts, and then press M. 2. Select Filter. 3. Set this option to DC/GC/Scngrp. To set Contacts to show all entries: 1. Press M > Contacts, and then press M. 2. Select Filter. 3. Set this option to Show All. Finding Speed Dial Numbers 䊳 Press M > Contacts and select an entry.
1. Press M > Contacts and scroll to the entry you want to edit. 2. Press Edit - (left softkey). Deleting Entries 1. Press M > Contacts and scroll to the entry you want to delete. 2. Press M. – or – 3. To delete the entire entry, select Delete Contact. If Edit is not one of your options, press M and then select Edit. 4. Press r or press Yes - (left softkey) to confirm. The entry details screen displays. 3.
Assigning Speed Dial Numbers Your phone can store up to 600 phone numbers in speed dial locations. (For details on how to make calls using speed dial numbers, see “Using Speed Dialing” on page 35.) 5. Press Done - (left softkey) to save the new contact. To assign a speed dial number to an existing phone number: 1. Press M > Contacts and then scroll to an entry. 2.
Dialing Nextel Customer Service Assign a ringer type to a Contacts entry so you can identify the caller by the ringer type. (See “Ring Tones” on page 65.) Your Contacts list is preprogrammed with contact numbers for Nextel Customer Service. 1. Press M > Contacts, scroll to an entry, and then press M > Edit. 2. Select Ringer and press r to display the Ring To dial Nextel Customer Service from your Contacts: Contacts Selecting a Ringer Type for an Entry 1. Press M > Contacts and scroll to NEXTEL CARE.
Section 2F Datebook Tools Datebook stores up to 250 events. You can store events over a thirteen month period — twelve months after and one month before the current date.
䢇 䢇 䢇 䢇 䢇 A date — The date automatically assigned to an event is the date that was highlighted or selected when you began creating the event. You can change this date before storing the event. A repeat — Lets you store the event as a recurring event. A reminder — If an event has a start time, you can set Datebook to remind you that the event is going to start. A ring tone for the reminder. A profile that your phone uses during the event. A Java application that starts when the event starts.
To highlight a day in month view: 䊳 Enter the date using the keypad. To go to today’s date: 1. While viewing Datebook, press M. 2. Select Go To Today. To go to any date in Datebook: 1. While viewing datebook, press New - (left softkey). – or – In day view, select [New Event]. 2. To assign a subject to the event, select Subject and: 䡲 Enter the name. 1. While viewing Datebook, press M. – or – 2. Select Go To Date. Press Browse - (left softkey) to choose from common event names. 3.
Location and: 䡲 Enter the location. – or – Enter a phone number, Direct Connect number, or Talkgroup number. After the event is stored, you can call this number. 䡲 When you are finished, press r. 4. The start time automatically assigned to an event is the beginning of the day. If you want to change the start time or assign no start time: 䡲 Select Start. 䡲 Enter the start time you want. – or – Press No Time - (right softkey) to assign no start time. 5.
Note 䡲 If an event has no start time, you cannot create a reminder for it. 9. If you have created a reminder for the event and want to set the ring tone for that reminder: 䡲 Select Ring Tone. 䡲 Select the ring tone you want from the ring tones stored in your phone. 10. If you want to assign a profile that your phone is switched to while the event is occurring: 䡲 Select Profile. 䡲 Select the profile you want from the profiles stored in your phone.
4. Select Copy. Select This Event Only to delete only the event selected in step 2. 䡲 Select Repeat Event to delete all occurrences of the event. 5. Press Yes - (left softkey) to confirm. 6. Enter the date you want. 7. Press r. Receiving Reminders 8. If you want to change more information, follow the applicable instructions in “Creating Events” on page 110 to edit the various fields. 9. Press Done - (left softkey) to store the event. Deleting Events 1. Select the day the event occurs. 2.
Making Calls From Datebook and Datebook Reminders If you stored a phone number, Direct Connect number, or Talkgroup number in the Subject or Location field of a Datebook event, you can call or send a Call Alert to that number from Datebook or from the reminder of that event.
Customizing Datebook Setup To call a number: To access Datebook set up options: 䊳 Press O. – or – Press M and then select Call # in Event. To make Direct Connect calls or Talkgroup calls: 䊳 Press the Direct Connect button. To send a Call Alert: 䊳 Press M and select Alert # in Event. Tools Making Calls From Datebook Reminders 1. Select M > Datebook. 2. Press M. 3. Select Setup.
Java Applications Installing Applications 1. Press M > Java Apps. 2. Select the application or suite of applications you want to install. Installation messages appear as the application installs. 3. If you want to create a shortcut to the Java To run an application that does not have a shortcut on the main menu: 1. Press M > Java Apps. 2. Select the application or suite of applications you want to run. 3. If you have selected a suite of applications, select the application you want to run.
Resuming Applications You can resume a suspended application at any time. This brings it to the foreground. To resume a suspended application: If End is not one of your options, press M and select End. Tip You can also end applications from the Suspended Apps screen To end all applications: 1. Press M > Java Apps. 2. Scroll to Suspended Apps. 1. Press M > Java Apps and select Suspended Apps. 3. Press M. 2. Select the application you want to resume. 4. Select End All. Ending Applications 5.
To access a catalog of items available for purchase and download: 䊳 Press M Java Apps > Buy Games&Apps or Download Apps. – or – Press M > Downloads. You can also go to www.nextel.com, sign on to your account, and click the Digital Media option for a wide selection of available Java applications and downloading instructions. Deleting Applications To delete an application: 1. Press M > Java Apps. 2. Scroll to Java System. (You may need to press More - [left softkey] to display Java System.) 3. Press M.
Java application data is stored in your phone using the same memory space used to store messages, voice records, pictures, ring tones, and wallpaper images. Deleting some of these other items frees memory for Java applications. Shortcuts on the Main Menu To remove a shortcut: 1. Press M > Settings > Personalize > Menu Options > Add/Remove Apps. Tools Note 2. Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it.
Digital Rights Management (DRM) When you download multimedia content available online, such as Java applications, these items may be subject to DRM restrictions. DRM, or digital rights management, is a system that defines how copyrighted multimedia content can be distributed and used. DRM limits items to time-based or count-based usage settings. Time-based settings let you use the given item for a specified interval.
Note Java application data is stored in your phone using the same memory space used to store messages, voice records, pictures, ring tones, and wallpaper images. Deleting some of these other items frees memory for Java applications. 1. Go to the location on your phone that contains the item you want. Note You cannot delete items that are DRM locked. Note Under certain conditions, third-party vendors will let you download an item multiple times within a given time frame, even if you deleted the item.
GPS Enabled Your phone’s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your phone, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature.
In temperature extremes outside the operating limits of your phone. Walking or driving very slowly may also substantially reduce GPS performance. Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may not be as accurate. Therefore, in any 911 call, always report the location to the emergency response center if you can and if you cannot, remain on your phone for as long as the emergency response center instructs you.
calculate your approximate location. It will take the GPS feature of your phone some time to determine your approximate location. Even where your phone has good access to sufficient GPS satellite signals and network assist data, it may take 30 seconds or more to determine the approximate location. This time will increase where there is reduced access to satellite signals. When your approximate location is determined, it is made available to the appropriate emergency response center.
䢇 The estimated accuracy of the calculated location. This estimate of accuracy is only a very rough estimate and may vary substantially from the actual accuracy of the approximate location information reported. The number of satellites used to calculate the location. In general, more satellites make for better accuracy. To calculate your location again: 䊳 Press Rfrsh - (left softkey). It may take your phone several minutes to complete the process of determining your location.
To improve accuracy and increase your chances of a successful calculation, do the following while your phone is determining your approximate location: 䢇 Stay in the open. The GPS feature works best where there is nothing between your phone and a large amount of open sky. If possible, go outside, away from tall buildings and foliage. While performance in a building is improved by moving closer to windows, glass with certain sun shielding films may block satellite signals.
Note When you make an emergency call, your phone does not rely upon the almanac to determine your location. If your satellite almanac data is out of date, your phone may prompt you to update it. Follow the instructions that appear on the phone’s display. You may be asked to go to a Web site or call a customer service number.
Software Compatibility Your phone sends location information to your laptop or other device using the standard National Marine Electronics Association (NMEA) format. Your phone supports output messages in NMEA-0183 format and supports the following NMEA-0183 sentences: GGA, GLL, GSA, GSV, RMC, and VTG. The map software running on your laptop or other device must support NMEA 3.0. To connect your phone to your laptop or other device: 1. Pull open the connector cover. 2.
laptop or other device. Make sure no other application is using the COM port selected. Make sure the COM port settings of your laptop or other device are set to the following: 䢇 Bits per second: 4800 䢇 Data bits: 8 䢇 Parity: None 䢇 Stop bits: 1 䢇 Flow control: Hardware To set your phone to send location information to your laptop or other device: 1. Press M > GPS > Interface. 2. Set NMEA OUT to On. Your phone is now sending location data to your laptop or other device.
To edit the memo: 1. Press M > Memo 2. Press and hold Delete - (left softkey) to delete the number. 3. Enter the new number. 4. Press r. To make a call to the memo number: 1. Press M > Memo 2. To make a phone call, press O. – or – To make a Direct Connect call, press the Direct Connect button. To store the memo number to Contacts: 1. Press M > Memo 2. Press M. 3. Select Store to Cntcs. 130 Section 2F. Tools 4. To store the number as a new entry, select [New Contact].
A voice record is a recording you make with your phone and can play back. You can record notes to yourself or phone calls. Your phone can store up to 20 voice records. Creating Voice Records To record a note to yourself: 1. Press M > VoiceRecord > [New VoiceRec]. 2. Say the message you want to record into the microphone. Note Recording of phone calls is subject to applicable laws regarding privacy and recording of phone conversations.
Labeling Voice Records When you create a voice record, it is labeled with the time and date it was recorded. You can then rename it with a custom label. 1. Press M > VoiceRecord. 2. Scroll to the voice record you want to label. 3. Press Label - (left softkey). 4. Enter the label you want to assign. 5. Press r. Deleting Voice Records To delete a voice record: 1. Press M > VoiceRecord. 2. Scroll to any voice record. 3. Press M and select Delete All. 4. Press r or Yes - (left softkey) to confirm.
Managing Memory My Pictures (left softkey). My Pictures lets you view pictures you received in MMS messages and Direct Connect calls. You can send the pictures stored in My Pictures in MMS messages and Direct Connect calls. – or – Viewing Pictures 1. Press M > VoiceRecord. 2. With [New VoiceRec] highlighted, press Memory - With any voice record highlighted, press M, and then select Memory. To free more memory by deleting all unlocked voice records: 1. Press M > My Pictures.
Getting File Information Managing Memory To view the file type and file size of a picture: To view your used memory, free memory, and memory capacity: 1. Scroll to or select the picture. 2. Press M. 1. Scroll to or select any picture. 3. Select Details. 2. Press M. Deleting Pictures 1. Scroll to or select the picture you want to delete. 2. Press M. 3. Select Delete. 134 Section 2F. Tools 3. Select Memory Size.
Call timers measure the duration of your phone calls, Direct Connect, or Group Connect calls, and circuit data use, as well as the number of kilobytes sent and received by your phone: 䢇 Last Call — displays the duration of your most recent phone call. 䢇 Phone Reset — keeps a running total of your phone call minutes, until you reset it. 䢇 Phone Lifetime — displays the total minutes of all your phone calls.
Section 2G Turning Bluetooth On and Off Bluetooth By default, your device’s Bluetooth feature is turned off. Turning Bluetooth on makes your phone “discoverable” by other in-range Bluetooth devices. ⽧ Turning Bluetooth On and Off (page 136) ⽧ Using the Bluetooth Menu (page 137) ⽧ Pairing Bluetooth Devices (page 138) ⽧ Transferring Items Via Bluetooth (page 144) Your phone features built-in Bluetooth technology, allowing you to share information more easily than ever before.
The following icons show your Bluetooth connection status at a glance: No Icon – Bluetooth is disabled (default status) Blinking Icon – Phone is in discovery mode. B – Bluetooth is active. Using the Bluetooth Menu The Bluetooth menu allows you to set up many of the characteristics of your phone’s Bluetooth service, including: 䢇 Powering Bluetooth on or off. 䢇 Entering or changing the name your phone uses for Bluetooth communication.
Pairing Bluetooth Devices Paired Devices The Bluetooth pairing process allows you to establish trusted connections between your phone and another Bluetooth device. When devices are paired, a passkey is shared between devices, allowing for fast, secure connections while bypassing the discovery and authentication process. To pair your phone with another Bluetooth device: 1. Press M> Bluetooth > Link to Devices. (Your phone will display a list of discovered in-range Bluetooth devices.) 2.
Renaming Your Phone You can configure the following aspects of Bluetooth: 䢇 Power. 䢇 Device name. 䢇 Voice recognition and dialing. 䢇 Find Me duration. Bluetooth devices are listed by their Bluetooth addresses unless you name them. Your i365 phone comes with a default device name of “Motorola Phone.” it is recommended you rename your i365 phone with a unique device name. 1. Press M > Bluetooth > Setup > Name. Turning Bluetooth On or Off 2.
Accessing Bluetooth 䊳 Press M > Bluetooth. – or – While in a call, press M and select Use Bluetooth. Note If Bluetooth power is set to Off on your phone, you will be prompted to temporarily turn power on in order to use Bluetooth. Making a Bluetooth Connection The following sections cover how to connect your phone to another Bluetooth device. Note Some Bluetooth devices only have full functionality when DTMF dialing is set to On. See “Phone Calls Features” on page 61.
To stop the search and return to the previous screen, press Cancel - (right softkey). Bluetooth Bonds (Pairing) A bond is an encryption key that is generated when two Bluetooth devices exchange a common PIN. This key verifies the identity of each device, and encrypts any data transferred between the devices. Once the PIN is exchanged, the devices do not have to be in discoverable mode in order to exchange information. You only need to create a bond once between two devices.
If you want to create a bond to have it available for future use, select Link to Devices. 3. Select the device you want. 4. Press Yes - (left softkey) if you are prompted to do so. 5. Enter a PIN if you are prompted to do so, and then press Ok - (left softkey). 6. If necessary, enter the same PIN for the other device. 7. Select Bond With if you are prompted to do so.
1. While in a call, press M and then select Use Bluetooth. 2. Select the device you want to connect to. Disconnecting From a Device 1. Press M > Bluetooth > Hands Free. 2. Press Drop - (left softkey) 3. Press Yes - (left softkey). Note Pressing No - (right softkey) when prompted exits the menu without disconnecting the device. Setting Device Details The device history stores a list of up to 20 devices that have connected with your phone.
5. Press and hold Delete - (left softkey) to delete the current name. 6. Enter the new name and press r. Note A device name can have a maximum of 40 characters. Editing Device Access Settings 1. Press M > Bluetooth > Device History. Transferring Items Via Bluetooth Sending Contacts and Datebook Events Bluetooth lets you send Contacts entries and Datebook events to connected devices. Files sent or received may be up to 1 MB. Note 2. Scroll to the device you want to set access for. 3.
1. Press M > Contacts. 2. Highlight the contact you want to send. 3. Press M > Send Via... > Bluetooth. 4. Select the device you want to transfer to. – or – Search for the device you want to transfer to by selecting [Find Devices]. 5. If prompted, bond with the device. 6. Your phone connects to the device and transfers the contact. To send Datebook events: 1. Press M> Datebook. 5.
Receiving Items Viewing and Storing Received Items You receive a prompt when your phone has an incoming transfer. After an incoming transfer is complete, your phone translates the item. The item appears on your phone’s display. 䊳 Press Accept - (left softkey) to accept the transfer. – or – 䊳 Press Reject - (right softkey) to reject the transfer. Canceling Transfers You can cancel a transfer while the transfer is in progress. To cancel a transfer: 1. Press Cancel - (right softkey). 2.
Section 3 Service Features
Section 3A Service Features: The Basics Now that you’ve explored your phone’s fundamentals, it’s time to learn about the calling features that enhance your service. This section outlines your basic wireless service features. Message Center ⽧ Message Center (page 148) The message center manages your messages.
䊳 Receiving Messages Service Features Accessing the Message Center Press M > Messages. Message Center Options After accessing the message center, select the option you want: 䢇 [Create Mesg] — begin creating an MMS message. 䢇 Voice Mail — access voicemail messages you have received. 䢇 Inbox — access MMS messages you have received. 䢇 Drafts — access MMS messages you have created and saved but not sent. 䢇 Sent Items — access MMS messages you have created and sent.
If you are not on a phone call when you receive a message, your phone sounds a notification tone every 30 seconds until you access the message, you dismiss the notification, or the alert time-out expires. When you are on a phone call, you can receive message notifications for all types of messages except MMS messages. For other types of messages, your phone may sound a notification tone during the call or after you end the call, depending on how you set your notification options.
Using your i365 phone, dial your ten-digit Nextel Personal Telephone Number (PTN). For example: 7035557777. Follow the system instructions to create a new four- to seven-digit password, record your name, and record a greeting. When the system says, “Thank you for using Nextel Voicemail,” your mailbox is set up. If you are setting up your voicemail from a phone other than your i365, dial your ten-digit Nextel PTN. When you hear the greeting, press the star key to access your voicemail box.
Note It is important that you choose a number that is easy for you to remember, but hard for someone else to guess. Passwords using all the same digits, for example 4,4,4,4 or a sequential series of digits, 1,2,3,4, will not be accepted. 5. Press ## to return to the main menu. Note If you forget your password, contact Nextel Customer Service. Recording Your Name When you send, reply to, or copy a message, your name response precedes the message. To record or re-record your name at any time: 1.
Multiple Greetings To select your active greeting: 1. From the main voicemail menu, press 3 to access the greetings menu. You can create up to five different greetings and designate which greeting will be your active greeting at any given time. The greeting that was recorded during your initial voicemail box setup is greeting 1. This is your default active greeting. 3. Enter the number of the greeting that you would To record additional greetings: 4. Press 1 to play your active greeting. 1.
Greetings Schedule Note You can choose to have your greetings automatically activated based on a pre-determined time schedule. By activating the Greeting Schedule, Greetings 1, 2, and 3 will automatically play according to the time schedule listed below.
You can select the order in which you want unheard messages to be played. You may listen to the last received message first, or you may listen to the first received message first. To select the order in which new messages should be played: 1. From the main voicemail menu, press 4 to access personal options. 2. Press 4 to access personal preferences. 3. Press 2 to access playback preferences. 4. Press 1 to switch between the playback orders. 5. Press ** to return to the main menu.
Delivery Options After you have created a message, you can assign the message to a category before you send it. Below is a list of the options that can be applied to a message: 䢇 Urgent — Recipient will hear this message before other messages. 䢇 Private — Recipient cannot copy the message to another mailbox or phone number. 䢇 Notification of Non-Delivery — You will be notified if the recipient has not listened to your message by a certain date and time.
Nextel voicemail settings can be heard in English or Spanish. Use this feature to change the language you and your callers will hear while in voicemail. 1. From the main voicemail menu, press 4 to access your personal options 2. Press 4 again to access the language menu. 3. Follow the prompts to change your language setting to English or Spanish. Working With Group Lists This feature enables you to create a list and assign it a unique name. Then, you can add mailbox numbers, group lists, or individuals.
To enable or disable message forwarding, press 3. 䡲 To change the forwarding type, press 2. 䡲 4. Press ** to return to the main menu. Multimedia Messages Multimedia Messaging Service (MMS) lets you send and receive messages that may include text, pictures, and audio recordings. You can send and receive these messages from your phone, through any email account, and from www.nextel.com. Your MMS address is PTN@messaging.nextel.com. Your PTN is your ten-digit Nextel Personal Telephone Number.
䊳 䢇 Scroll left. – or – 䢇 Press *. To open a message on the current page: 䊳 Highlight the message you want to open and press r. – or – Press the number on the keypad corresponding to the number of the message. Creating and Sending Messages Each message you create may contain the following fields: 䢇 To — the phone numbers or email addresses of one or more recipients. 䢇 Mesg — the body of the message. This may include text, pictures, ring tones, or voice records. 䢇 Subject — the subject line.
While entering text, you can always press M to choose a text input mode from the context-sensitive menu. For information on ways to enter text from the keypad, see “Entering Text” on page 20. Message Size You can create and send messages of up to 100 KB, including attachments. The size of the message appears at the top of the display as you are creating the message. Sending or Canceling To send the message at any time after it has been addressed: 䊳 Press Send - (left softkey).
䡲 Select To. Enter the phone number or email address from the keypad and press r. Repeat this action to enter more phone numbers or email addresses. – or – Select recipients from Contacts or the Recent Calls list. See “More Ways to Address a Message” on page 165 Tip 䡲 To remove a phone number or email address from the list of message recipients, scroll to the phone number or email address and press Remove (right softkey). When you are finished addressing the message, press Back - (right softkey). 3.
2. If you want to create or edit the subject line: 䡲 Select Subject. Enter text from the keypad. 䡲 Select a Quick Note. See “Quick Notes” on page 166. 䡲 When you are finished, press r. 3. If you want to attach a picture, a ring tone, or a voice record, see “Attaching Pictures” on page 168. When you are finished, press Done (left softkey). 4. If you want to add more recipients in addition to those in the To field: 䡲 Select Cc. Enter the phone number or email address from the keypad and press r.
You can reply to a received message while you are viewing it. If you have already viewed a message, you can also reply to it while it is highlighted in the message center. You cannot reply to unread messages. For information on viewing received messages, see “Receiving a Message” on page 172 and “Viewing Received Messages From the Message Center” on page 173.
Note If the message you are replying to was sent with auto replies, it contains a numbered list of possible replies. Press the number of the reply you want to send. The reply is sent immediately without any further action. More Ways to Begin a Message In addition to beginning a message from the message center, you can begin a message from Contacts, the Recent Calls list, standby mode, or My Pictures. To begin a message from Contacts: 1.
1. From My Pictures, scroll to or select the picture you want to include in your message. 2. Press Send - (left softkey). 3. Create and send the message. The picture you selected is automatically included as an attachment. Tip You can search for an entry name as you would when viewing Contacts. See “Viewing Contacts” on page 103. Service Features To begin a message from My Pictures: To address a message from Contacts: 1. While you are creating a message, scroll to or select To or Cc. 2.
Direct Connect calls are displayed only if the Direct Connect number is stored in Contacts and its Contacts entry also contains a phone number or email address. To address a message from the Recent Calls list: 1. While you are creating a message, scroll to or select To or Cc. 2. Press M and select Recent Calls. 3. Select the entry containing the phone number or email address you want to send the message to. 4.
For information on how objects inserted into the body of a message appear when a message is received, see “Embedded Objects and Attachments” on page 172. Inserting Pictures You can insert pictures from My Pictures. Pictures that you download to your phone or receive in a message may be forward locked, meaning they cannot be included in a message. Note If this icon ] appears next to a picture, you cannot send it in a message. To insert a picture: 1. While you are filling in the Mesg field, press M. 2.
To insert a voice record: 1. While you are filling in the Mesg field, press M. 2. Select Add VoiceRec. A list of voice records that can be included in a message appears. 3. Select the voice record you want to insert. Tip To hear a voice record before inserting it, highlight the voice record and press Play - (left softkey). 1. While you are creating a message, select MORE and then select Attach. 2. Select [New]. 3. Select My Pictures. A list of pictures that can be included in a message appears. 4.
Tip To hear a ring tone before attaching it, highlight the ring tone. 5. Press Done - (left softkey). Attaching Voice Records You can attach voice records from your list of voice records, or you can create one to attach to the message you are creating. Voice records created by recording a phone call cannot be included in a message. 1. While you are creating a message, select MORE and then select Attach. the recording. The newly created voice record will appear in the list of voice records. 4.
Saving a Message in Drafts To delete a message in Drafts without sending it: 1. While you are creating a message, press M. 1. Scroll to the message you want to delete. 2. Select Save. 2. Press Delete - (left softkey). You can continue to create the message. The version you saved in Drafts will not change. 3. Press r or press Yes - (left softkey) to confirm. Drafts Icons Sending a Draft 1. Press M > Messages > Drafts. M Draft. 2. Scroll to the draft you want to send. w High priority. 3. Press M.
4. Select Forward. 5. Edit and send your message. 4. Select Delivery Status. Deleting Sent Messages 1. Scroll to the message you want to delete. Resending Messages If a message was not sent from your phone, you can resend it. 1. Press M > Messages > Sent Items. 2. Scroll to the message you want to resend. Service Features 3. Press M. – or – View the message you want to delete. 2. Press Delete - (left softkey). 3. Press r or press Yes - (left softkey) to confirm. Sent Items Icons 3.
Receiving a Message Embedded Objects and Attachments When you receive an MMS message, a message notification appears on the display. Messages may contain pictures or audio recordings as part of the body of the message or as attachments. To view the message: If a message contains pictures or audio recordings in the body of the message, highlight each picture or audio recording to view or play it. 1. Press r or press Read - (left softkey). The message is downloaded from the message server. 2.
Attachments that are of an unknown type cannot be opened, but they can be deleted. See “Deleting Attachments” on page 177. Viewing a Slide Show Your phone can receive MMS messages containing slide shows. A slide show may contain a series of pictures that display in sequence. It may also include one or more audio recordings. When you view a message containing a slide show, this icon i appears. To view a slide show in a message: 䊳 To view the slide show again, press Restart - (left softkey).
Inbox Icons Actions for Received Messages u Unread message. Deleting T Read message. To delete unread messages: r Reply sent. 1. Scroll to the message you want to delete. N Forwarded. 2. Press Delete - (left softkey). O Locked. 3. Press r or press Yes - (left softkey) to confirm. w High priority. L Attachment. x Locked, with an attachment. z High priority and locked. y High priority with an attachment. 2. Press M and select Delete Message.
Calling a Number in a Message To forward a message: If a message you receive contains a phone number, Direct Connect number, or Talkgroup ID, you can call or send a Call Alert to that number. 1. View the message you want to forward. – or – 2. Press M and select Forward. These numbers may appear in the From field, the To field, the Cc field, the subject line, or the body of the message. 3. Create and send your message.
To send a Call Alert to a Direct Connect number in a message: 1. View the message. 2. Highlight the Direct Connect number you want to alert. 1. View the message. 2. Highlight the number or email address you want to save. 3. Press M and select Save Number or Save Email. 4. To store the number or email address as a new 3. Press M and select Alert. entry, select [New Contact]. 4. Press the Direct Connect button. – or – To make a Talkgroup call to a Talkgroup ID in a message: 1. View the message. 2.
2. Highlight the picture, ring tone or voice record you If a message contains one or more Web site URLs, you can go to the Web site. 3. Press M and select Delete Picture or Delete Audio. 1. View the message. want to delete. Saving Attachments 2. Highlight the Web site URL you want to go to. 1. View the message. 3. Press M and select Go To Website. 2. Highlight the attachment you want to save. Note 3. Press M and select Save Attachment. The entire URL must appear in the message.
Saving Slide Shows When viewing a slide show in a message you have received, you can save the parts of the slide show. If the slide show contains pictures, you can save each picture as it appears. If the slide show contains voice records, you can save each voice record at any time during the slide show. To save the pictures in a slide show: 1. View the slide show. 2. When the picture you want to save appears, press M. 3. Select Save Picture. To save the voice records in a slide show: 1.
Downloads — controls whether your phone automatically downloads new messages when they arrive, or only after you respond to a prompt or read the message from the Inbox. Set this option to Automatic if you want your phone to download new messages automatically; set the option to Manual if you want your phone to prompt you before downloading new messages. To access the Setup menu: 1. Press M > Messages. 2. With [Create Mesg] highlighted, press M. 3. Select Setup.
3. Press Delete - (right softkey). 䢇 4. Press r or press Yes - (left softkey) to confirm. To delete all Quick Notes or all reply phrases: 䢇 1. From the Setup menu, select Quick Notes or Replies. 2. Press M and select Delete All. 3. Press r or press Yes - (left softkey) to confirm. Setting the Clean-up Option The clean-up option controls how long messages remain in the Inbox and Sent Items before they are deleted. You set the clean-up option for the Inbox and Sent Items separately.
or press Yes - (left softkey). – or – To delete messages later, press No - (right softkey). Managing Memory All messages in the Inbox, Drafts, and Sent Items share the same memory space. Note Choosing to Delete Messages Later If you choose to delete messages later, rather than at the time you set the clean-up option, the type of clean-up option you set determines when messages are deleted. To view your used memory, free memory, and memory capacity: 1. Press M > Messages. 2.
Note Messages are stored in your phone using the same memory space used to store Java applications data, voice records, ring tones, pictures, and wallpaper images. Deleting some of these other items frees memory for messages. Deleting Multiple Messages You can delete read, unlocked messages from the Inbox, messages in Drafts, or successfully sent messages in Sent Items in groups or all at once. To delete more than one message: 1. Scroll to or view a message. 2. Press M. 3. Select Delete Multiple. 4.
䊳 When you receive a text message, an alert is displayed on your phone’s screen. Press Read (left softkey) to display the message and use your navigation key to scroll down and view the entire message. Caller ID Blocking Caller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you make a call, follow these steps.
To accept the second call and end the active call: Tip 1. Press o. Your phone rings with the second call. 2. Answer the second call. To decline the second call: 䊳 Press No - (right softkey). If you subscribe to voicemail, the call is forwarded to your voicemail box, unless you set Call Forward for If Busy to a different number. Tip For those calls where you don’t want to be interrupted, you can temporarily disable Call Waiting by pressing *70 before placing your call.
䊳 Press Switch - (right softkey). Making a Three-Way Call To merge two calls into a three-way call: 1. Place or receive a phone call. 2. While the call is active, press M. 3. Select 2nd Call. This puts the call on hold. 4. Enter the second phone number you want to call. With Three-Way Calling, you can talk to two people at the same time. When using this feature, the normal airtime rates will be charged for each of the two calls. 1. Place or receive a phone call.
Forwarding All Calls When you set your phone to forward all calls, an icon appears in the top row of the display: G Phone line 1 is active; calls to phone line 1 are being forwarded. I Phone line 1 is active; calls to phone line 2 are being forwarded. H Phone line 1 is active; calls to phone lines 1 and 2 are being forwarded. J Phone line 2 is active; calls to phone line 1 are being forwarded. L Phone line 2 is active; calls to phone line 2 are being forwarded.
If you do not want all your calls forwarded, turn the feature off: Note You are charged a higher rate for calls you have forwarded. To forward missed calls: 1. Press M > Call Forward > To. 1. Press M > Call Forward > Forward > Detailed. 2. Set this option to Off. Note All your calls are now sent to your phone. If your phone is set to forward all calls, you must first turn off call forwarding to access this option.
5. Press r. Special Dialing Codes 6. Repeat step 2 through step 5 for If No Answer and If Unreachable. 7. When you are finished, press Back - (right softkey). Viewing Call Forwarding Settings 1. Press M > Call Forward > Forward > All Calls. 2. With To highlighted, press Status - (left softkey). Making International Calls Your service default is “International Calls Restricted.” Contact Nextel Customer Service to obtain international dialing access.
Using 711 to reach Telecommunications Relay Service may not be available in all areas. To enable TTY mode: 1. Press M > Settings > Phone Calls > TTY. 2. Press and r select On to enable TTY mode. Nextel Phone Services Service Features Note Contact Nextel Customer Service to obtain these services or for additional information: Note Some services are not available outside of the continental United States. 3.
Second Line Service You can have two different phone numbers on the same phone. With Second Line Service, you can: 䢇 Get separate bills for each phone line. 䢇 Bring in an existing wireless or home phone number to Nextel to activate on the second line. 䢇 Have two different area codes (must be in same market) to convey a local image to callers. 䢇 Use different ringer styles so that you can tell which line is receiving a call. 䢇 Forward incoming calls to either your primary or alternate line phone number.
Wireless Data Services Data Services With Web access on your phone, you can browse your favorite Web sites, making it easier than ever to stay informed while on the go. Follow sports scores, breaking news, and weather, and shop on your phone anywhere on the Nextel National Network. ⽧ Wireless Data Services (page 191) ⽧ Downloading Content (page 194) ⽧ Using Your Phone as a Modem (page 194) Data services offers easy and amazing features you will really use.
䢇 Email & IM – Allows you to send email and chat. 䢇 Your Bookmarks – Allows you to access and manage your bookmarks. Search – Launches a Web search. Go to URL – Provides access to other URLs. My Account – Lets you configure and manage your browser settings. Help – Displays online help. 䢇 䢇 䢇 䢇 Creating a Bookmark Bookmarks allow you to store the address of your favorite Web sites for easy access at a later time. 1. Go to the Web page you want to mark.
Reloading a Web Page 1. From the home page, select Your Bookmarks. 1. Press and hold M to open the browser menu. 2. Highlight a bookmark and press Menu : (right 2. Select Advanced > Reload. (The browser will reload softkey) > Delete. 3. Press Yes : (left softkey) or press r to confirm the deletion. Tip To return to the home page from any other Web page, press o. the current Web page.
Downloading Content Using Your Phone as a Modem Your phone arrives with Java applications and games loaded and ready to install. You can download and install more Java applications. For more information on Java Security, see “Setting Privacy for Each Java Application” on page 92. You can use your phone’s data connection as a modem for a laptop, handheld device, or desktop computer. Check the Downloads menu option on your phone for a catalog of items available for purchase and download.
1. Pull and rotate the connector cover. 2. Insert a data cable into the phone’s charger connector. Note To use these services, you must subscribe to a Nextel Wireless Web access plan. For more information on setting up your computer and your i365 phone for packet and circuit data calls, go to www.nextel.com.
4. Under Manufacturer, select [Standard Modem Types]. For Model, choose Standard 19200 bps Modem, and click Next to continue. 5. From the Internet Connection screen, select Connect Using a Dial-up Modem and click Next. Important 5. Select the COM port you want your phone installed on, and click Next and then Finish to complete the installation. You may be prompted to select the modem you would like to use. Make sure you choose the Standard 19200 bps modem you created earlier.
Internet service and check the appropriate fields for connecting to your service provider (if applicable). Click Next and then Finish to complete the process. Connecting to the Internet or a Network for the First Time Before you use your phone to connect to the Internet or a network for the first time, you must disable LCP Extensions. 1. From Network Connections, select the dial-up connection you just created. 2. From the dial-up screen, click Properties. 3.
䡲 ATI4 – This command will show you the 䡲 ATD plus the dial-in number of the ISP – This manufacturer of the unit. command will show you if the unit can make a Circuit Data call. 䡲 ATDS = 2 – This command will show you if the unit can make a Packet Data call. 198 Section 3B.
Section 4 Safety and Warranty Information
Section 4A Important Safety Information ⽧ General Precautions (page 200) ⽧ Maintaining Safe Use of and Access to Your Phone (page 201) ⽧ Using Your Phone With a Hearing Aid Device (page 203) ⽧ Caring for the Environment by Recycling (page 205) ⽧ Caring for the Battery (page 205) ⽧ Export Law Assurances (page 207) ⽧ Radio Frequency (RF) Energy (page 208) ⽧ Owner’s Record (page 210) ⽧ Patent and Trademark Information (page 211) ⽧ Software Copyright Notice (page 211) ⽧ Privacy and Data Se
Do Not Rely on Your Phone for Emergency Calls Mobile phones operate using radio signals, which cannot guarantee connection in all conditions. Therefore you should never rely solely upon any mobile phone for essential communication (e.g., medical emergencies). Emergency calls may not be possible on all cellular networks or when certain network services or mobile phone features are in use. Check with your local service provider for details.
Operational Precautions Note Always turn off the phone in healthcare facilities, and request permission before using the phone near medical equipment. To assure optimal radio product performance and to be sure that human exposure to RF does not exceed the guidelines set forth in the relevant standards, always follow these instructions and precautions: Phone Operation When placing or receiving a phone call, hold your radio product as you would a wireline telephone. Speak directly into the microphone.
To avoid interfering with blasting operations, turn your phone off when in a blasting area or in other areas with signs indicating two-way radios should be turned off. Construction crews often use remote-control RF devices to set off explosives. Turn your phone off when you’re in any area that has a potentially explosive atmosphere. Although it’s rare, your phone and accessories could generate sparks. Sparks can cause an explosion or fire, resulting in bodily injury or even death.
out the phone with your hearing device is the best way to evaluate it for your personal needs. M-Ratings: Phones rated M3 or M4 meet FCC requirements for hearing aid compatibility and are likely to generate less interference to hearing devices than unrated phones. (M4 is the better/higher of the two ratings.) T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T Switch”or “Telephone Switch”) than unrated phones.
Caring for the Battery Protecting Your Battery This symbol on a Motorola product means the product should not be disposed of with household waste. Disposal of your Mobile Device and Accessories Please do not dispose of mobile devices or electrical accessories (such as chargers, headsets, or batteries) with your household waste. These items should be disposed of in accordance with the national collection and recycling schemes operated by your local or regional authority.
䢇 䢇 It’s best to replace the battery when it no longer provides acceptable performance. It can be recharged hundreds of times before it needs replacing. Don’t store the battery in high temperature areas for long periods of time.
Your portable radio or its accessories may include detachable parts, which may present a choking hazard to small children. Keep your device and its accessories away from small children. Glass Parts Some parts of your phone may be made of glass. This glass could break if the product is dropped on a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove. Stop using your phone until the glass is replaced by a qualified service center.
Radio Frequency (RF) Energy Body-Worn Operation Your phone contains a transmitter and receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits. To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the Motorola supplied or approved carrying case, holster or other body-worn accessory.
䢇 䢇 Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999. Australian Communications Authority Radio communications (Electromagnetic Radiation - Human Exposure) Standard 2003. ANATEL, Brazil Regulatory Authority, Resolution 303 (July 2, 2002) "Regulation of the limitation of exposure to electrical, magnetic, and electromagnetic fields in the radio frequency range between 9 kHz and 300 GHz.
safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 1.09 W/kg and when tested on the body, as described in this user guide, is 1.28 W/kg during packet data transmission. (Body-worn measurements differ among phone models, depending upon 1 available accessories and FCC requirements.
Software Copyright Notice MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2008 Motorola, Inc. All rights reserved. The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media.
Privacy and Data Security Motorola understands that privacy and data security are important to everyone. Because some features of your phone may affect your privacy or data security, please follow these recommendations to enhance protection of your information: 䢇 Monitor access: Keep your phone with you and do not leave it where others may have unmonitored access. Lock your device’s keypad where this feature is available.
䢇 䢇 䢇 䢇 䢇 䢇 assistance or other special non-emergency wireless number.* * Wherever wireless phone service is available Section 4A. Important Safety Information Important Safety Information 䢇 receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous.
Section 4B Manufacturer’s Warranty Motorola Limited Warranty for the United States and Canada What does this Warranty Cover? ⽧ Manufacturer’s Warranty (page 214) ⽧ Service and Repairs (page 219) Your phone has been designed to provide you with reliable, worry-free service. If for any reason you have a problem with your equipment, please refer to the manufacturer’s warranty in this section. For information regarding the terms and conditions of service for your phone, please visit www.nextel.
Products Covered Length of Coverage Products and Accessories as defined above, unless otherwise provided for below. One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below. Decorative Accessories and Cases. Decorative covers, bezels, PhoneWrap™ covers and cases. Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product. Monaural Headsets.
or (d) other acts which are not the fault of Motorola, are excluded from coverage. or use with the Products Accessories or Software is excluded from coverage. Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage. Software Unauthorized Service or Modification.
This warranty extends only to the first consumer purchaser, and is not transferable. How to Obtain Warranty Service or Other Information USA What Will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or parts.
What other limitations are there? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Warranty Service and Repairs If you have questions or need assistance, we’re here to help. Go to www.motorola.com/support, where you can select from a number of customer care options. You can also contact the Motorola Customer Support Center at 1-800-453-0920 (United States), 1-877-483-2840 (TTY/TDD United States for hearing impaired). Section 4B.
Index A Accessories 24 Charger 24 Li-Ion Battery 24 Activation 3 Answering Calls 29 Applications See Java Applications Attachments 172 See also MMS Messages, Attachments Audio Files See Voice Records B Backlight 60, 70 Battery 10–13 Capacity 10 Charging 12 Disposal 206 220 Index Installing 10 Baud rate 64 Bluetooth 136–146 Access Settings, Editing 144 Accessing 140 Bonds 141 Deleting Received Items 146 Device Details 143 Device Names, Editing 143 Devices, Deleting 144 Devices, Disconnecting 143 Devices, D
Group Connect 62 International 188 Redialing 61 Remote Direct Connect Button 25 Talkgroup 62 Voice Name 35, 38 Circuit Data 194 Clock 61 Clock Display 71 Contact Information Receiving 49, 95 Sending 47 Contacts 37, 99–107 Adding an Entry 99 Addressing MMS Messages 165 Capacity 107 Creating 100 Creating MMS Messages 164 Deleting 105 Editing Entries 100, 103 Searching 103 Showing All Entries 104 Showing Only Direct Connect 104 Storing Fast 103 Storing From Memo 130 Storing from MMS Messages 176 Storing from
Using Your Phone’s Datebook 108 DC/GC Options 62 See also Direct Connect Calls, Group Connect Calls, and Call Alerts Dialing Codes Non-Emergency Numbers 188 Telecommunications Relay Service 188 Digital Rights Management, see DRM Direct Connect One Touch, Setting 74 Direct Connect Number and Groups 41 Viewing 19 Direct Connect Numbers 36 Direct Send See Pictures, Sending Groups 50 222 Index Direct Talk 53 Code 54 Private Only 55 Receiving All Calls On Channel 56 Setting Up 54 Display Backlight 60 Display
Games 194 Installing Applications 116 Memory 118, 119, 121, 133 Resuming Applications 117 Running Applications 116 Suspending Applications 116 Settings 62 Storing Faster 42 H Headset 76 Hearing Aid Compatibility 203 I Icons Contacts 100 Drafts 170 Groups 44 Inbox 174 Sent Items 171 Status Information 15 Inbox 158, 174 Icons 174 In-Call Options 31 International Numbers 188 J Java Applications Deleting 118 Downloading 117 Ending Applications 117 Index GPS Enabled 122 Almanac Data 126 Best Results 125 Emerg
Storing to Contacts 130 Viewing 129 Memory Java Applications 118, 119, 121, 133 MMS Messages 149, 181 Pictures 134 Ring Tones 69 Voice Records 133 Menu ii Navigation 17 Selecting 18 Menu Style 71 Message Center 148 MMS Messages 158, 173 Text Messaging (SMS) 182 Voicemail 150 Messages Notifications 149 Notifications, Dismissing 149 Messaging Deleting Old Messages 72 Notification 72 224 Index Signature 73 MMS Messages Attachments 172, 177 Calls From 175 Creating 159 Deleting 171, 174, 180, 182 Deleting Slid
Packet Data 194 Passwords 64 Voicemail 151 Pauses 33 Storing 102 Phone Active Line 61 Locking 63 Your Numbers 19 Phone (illus.
Ring Tones Attaching to Messages 168 Deleting 69 Deleting from Messages 177 Downloading 68 Inserting in Messages 167 Memory 69 Setting in Contacts 101 Vibrate 68 Viewing Assigned 68 Ringer Types 65 S Safety Radio Frequency 208 Safety Information 200–213 Safety Tips 201 Security 63, 85–87 Sent Items 158, 170 Icons 171 See also MMS Messages, Sent Items 226 Index Settings 60 Resetting 64 Shortcuts Creating 81 Deleting 83 Editing 82 Using 82 Silence All 67 SIM Card Removing and Inserting 9 Security 85 SIM PI
W Waits Storing 102 Warranty 214–219 Web 191–193 Bookmarks 192 Go to Web Sites 193 Launching 191 Reloading a Web Page 193 Restarting 193 Wireless Data Services 191 Downloads 194 Word English Text Input 21 Index Voice Name 35, 38 Creating 102 Voice Records Attaching 169 Creating 131 Deleting 132 Deleting from Messages 177 Inserting in Messages 167 Labelling 132 Locking 132 Memory 133 Playing 131 Saving from Messages 177 Voicemail Changing Password 151 Greetings 152 Group Lists 157 Message Forwarding 157 Pl
