- Nextel Communications Barcode Reader User Manual

Nextel RoadRunners Scanner Programming Guide
Last updated: 10/14/05 7
© Baracoda 2005
Batch mode. Places the scanner in Batch mode.
CAUTION: SCANNING THIS BARCODE
ERASES ALL CODES IN MEMORY.
\ VT\ VTd\ NUL\ SOH\ SOH\ FF\ FF
bat ch
Discharge barcode.
CAUTION: SCANNING THIS BARCODE
ERASES ALL CODES IN MEMORY
\VT\VT\FNC4z\NUL\NUL\FF\FF
Up l o a d
2.6 Beep and LED Settings
These options can be used to enable or disable the beep and/or the LED. It is also possible to invert (swap) LED
positions.
LED CONFIG: default (*) LED CONFIG: inverted
\VT\VT\FNC4\SO\NUL\SOH\NUL\FF\FF
l eds : def aul t
\VT\VT\FNC4\SO\NUL\SOH\SOH\FF\FF
l eds : i nver t ed
LED ON (*) LED OFF
\VT\VT\FNC4\EOT\NUL\SOH\FNC4\SOH\FF\FF
leds on
\VT\VT\FNC4\EOT\NUL\SOH\FNC4\NUL\FF\FF
leds off
Good Read Beep ON Good Read Beep OFF
\ VT\ VT\ FNC4 \ DC4 \ NUL\ SOH\ FNC4 " \ F F\ FF
r ead beep ON
\ VT\ VT\ FNC4 \ DC4 \ NUL\ SOH\ FNC4 \ F F\ FF
r ead beep OFF
ACK Beep ON ACK Beep OFF
\VT\VT\FNC4\DC4\NUL\SOHd\FF\FF
ACK be ep ON
\VT\VT\FNC4\DC4\NUL\SOHb\FF\FF
ACK beep of f