MODEL NO. TV850F OPERATING INSTRUCTIONS D ig ital V ideo B roadcasting PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.
IMPORTANT SAFETY INSTRUCTIONS ENG 01 Thank you for purchasing this TV850F tablet digital / analog TV. Please read this manual carefully before operating your unit and keep it handy for future reference. It will be helpful to you if you encounter any operational problem . IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this unit near water. Clean only with dry cloth.
02 ENG IMPORTANT SAFETY INSTRUCTIONS N OT ICE S: 1. Fully charge the Ni-MH battery before using it for the first time or reusing it after being stored for a long period. It would need 3 to 5 circles of charging and discharging operations to get the optimum performance of the battery. 2. The surrounding temperature has much to do with the charging efficiency and should be between 0 C and 40 C. The charging performance will be in the most efficient state from 10 C to 30 C. O O O O 3.
CONTENTS IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS.......................................1 PACKAGE CONTENTS PACKAGE CONTENTS ......................... 4 PARTS IDENTIFICATION MAIN UNIT............................................... 5 MAIN UNIT CONTROL SECTION........... 5 MAIN UNIT LEFT SIDE............................6 MAIN UNIT RIGHT PANEL.......................7 MAIN UNIT REAR SIDE...........................8 HOW TO STAND......................................8 REMOTE CONTROL..........
04 ENG PACKAGE CONTENTS P A CKAG E C ONT EN T S After unpacking, first check that all the accessories listed below are included: Au dio a nd vi deo ca bles A ccess ory b ag Ope rat i ng m anual Rem ot e control Ca rryin g ba g Ca r b a g M ini- ma gnetic Ant enna Car power cab le AC / DC ada pt er MODEL NO. TV850 OPERATING IN STRU CTION S Di g i t al V i d eo B r o ad ca st i ng NOTES:Actual products' appearance might vary slightly from the pictures shown.
PARTS IDENTIFICATION ENG 05 M AI N U NIT 1 2 My FM 3 4 1.Liquid crystal display 2.Speakers 3.Control section Control buttons. 4.Remote control sensor The remote control signals are received from here. M AI N U NIT CO NT R OL SEC TIO N MyFM 1.ADJU ST button Press it to enter the adjustment menu. Use the +/- button to choose the Picuture /OSD/ FM/ EXIT items, then press the ADJUST button to enter you want .Then use the +/- and ADJUST buttons to handle what you want to do. 1.
06 ENG PARTS IDENTIFICATION CONTRAST: Level 0 to 8. BRIGHTNESS: Level 0 to 8. Contrast SATURATION: Level 0 to 8. Brightness SCREEN SIZE: Switch screen between Saturation Screen Size 16:9 and 4:3. Display Mode : Normal DISPLAY MODE: Switch screen between Exit normal and rotate. . A ENT. 2.OSD ( ) OSD languages: English, French, German, Spanish and Italian. OSD Timeout : Level 10 to 60. Transparency: Level 0 to 7. 3.FM ( F M) See the detail in page 28. 2.
PARTS IDENTIFICATION ENG 07 3.EP G but ton( ) Press it to sh ow the elect ric pro gram menu, press it agai n to ex it from it. It is on ly use ful for the US B ope ration as the left b utton. 4.TT X butt on( ) Press it t o show the te letext inform ation menu. It i s only useful for the USB operation as the rig ht bu tton. M AI N U NIT LEF T P ANEL 1 2 3 4 5 6 1.EA RPHON E ja ck For connecting a stereo earphone or an amplifier. 2.US B jack Support USB 1.1 use. 3.
08 ENG PARTS IDENTIFICATION 1.POWER ON/OFF switch Push the button to “ON” or “OFF” to turn on or turn off the power. 2.POWER indicator The LED will be red when the unit is on. 3.ANTENNA Jack DVB-T type aerial input. MAI N U NIT RE AR SIDE 1 1. Sup port The unit can stand with this device. H OW TO ST AND 1. Pull out the support. 2. Draw out the support to a proper position . 3. Push down the button to lock it.
PARTS IDENTIFICATION ENG 09 R EMOTE CO NT R OL (10) (11 ) (1 ) (12) (13) (2 ) (14) (3 ) (16) (15) (4 ) (5 ) (6 ) (7 ) (18) (8 ) (19) (17) (20) (21) (9 ) (22) (23) (24 ) (27) (25 ) (26) MOBILE ENTERTAINMENT PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.
10 ENG PARTS IDENTIFICATION KE Y DE SC RIP TIO N O F R EMOTE CO NT R OL 1. MENU 14.VOL+ Volume up. Press it to show the menu. 2. EXIT Exit from the current item. 3. CH+/UP Press it to change channels up or move the cursor up. 4. FAVSwitch to previous favorite program if you have setted some programs as your favorite programs. if not, it is invalid key. 15.VOLVolume down. 16.ENTER Confirm the selection action. 17.L/R Switch the audio channels. 18.MUTE Audio mute on/off. 19.
PARTS IDENTIFICATION ENG 11 N OT ES O N U SI NG T HE RE MO T E C ON TR OL U NIT Do not drop or step on the remote control unit or subject it to shocks. Note that the remote control unit may not work if there are obstacles between it and the remote sensor. Do not expose the remote sensor to strong light. Doing so may make operation impossible. Use the remote control unit within the specified operating range. R EP L AC ING TH E B ATT ERY 1.Insert your finger nails into A and B on the diagram below.
12 ENG DTV PARTS IDENTIFICATION S PEC IAL KE YS EPG (Electronic Program Guide) A quick program guide that the user can easily move up/down to view the brief description of the selected program. Press the EXIT button or the EPG button again to exit from this interface. Electronic Program Guide Video 08 /08/2 005 13 :00 14:00 15:00 A Program List Program Description B C If the current channel is scrambled, the prompt message "scrambled channel." will appear on the screen. Scrambled channel.
DTV PARTS IDENTIFICATION ENG 13 MANUAL SCAN Perform program scanning. (Found programs will be appended to the program list.
14 ENG DTV PARTS IDENTIFICATION INFO Press this button to bring forth the primary program information. TV 0001 Sig nal 14 :29:08 GD 1 St ere o L ang uag e 1 /1 8 8% Press this button twice to bring forth the particular program information, and press it again to exit from this interface . Program Info Pro g Na me Pro g NO .
USB PLAYBACK OPERATIONS ENG 15 U SIN G T HE U SB PO RT Only in the DTV status can it read the MP3, JPG, BMP and MPEG files stored in a USB device which is plugged into the USB port on the left side of the unit. 1. If a USB device is connected before the unit is turned on, there will be a prompt message shown on the screen, press the and ENTER buttons on the remote conrtrol or on the top panel of the main unit to select the media. 2.
16 ENG USB PLAYBACK OPERATIONS USE keys to move the cursor to a folder, a file ,MP3 ICON, JPEG ICON or MPEG ICON. Press OK to enter the folder or play the file highlighted. You can press the JPG or BMP files. keys to rotate or flip the picture when you are viewing You can control the playback of USB files by pressing keys. 4. If there is a USB device connected, you can enter the media selecting interface by pressing the EXIT button during the playback of USB or TV. NOTE: 1.
DTV MENU ENG 17 GENERAL ST EP S OF SETUP 1.Press the MENU key on the remote control to bring “main menu”. There are three classifications: DTV Channel, Configuration and Game . DTV Ch annel TV C ha nnel s Radi o Cha n ne ls Pro gra m G ui de USB 2.Press and buttons to highlight the icon of the desired page, then press the Down or Up button to activate that page. GAME Bo xM an Bu rnin g Tet ris Hit R at 3.Press and buttons to highlight the desired option. Press OK to select.
18 ENG DTV CHANNEL TV CH A NNEL S AND RADIO C HA NNELS There are two different kinds of channels: TV Channels and Radio Channels. You can manage the current channels by labeling your favorites, deleting the non-favorites, moving the program 's order and locking the channels. The default is FAVORITE.If there are no programs saved in the database when entering TV Channels or Radio Channels, the prompt message “No TV channels." or "No radio channels.” will pop out and disappear within several seconds.
DTV CHANNEL You can use and status. ENG 19 buttons to select any programs at FAVORITE management If the selected program is not labeled with the FAVORITE symbol, you can set it as your favorite program by pressing the OK button and the FAVORITE symbol will appear behind the program name. If the selected program has already been labeled, press the OK button to cancel the symbol. You can set multi-program to be your favorites at the same time. MOBILE ENTERTAINMENT PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.
20 ENG DTV CONFIGURATION Choose “Configuration” item and you will see that there are three options for selecting: System Setting, Auto Scan and Manual Scan. C onf ig uration S yst em Set t in g A ut o Sca n Ma nual Sca n S YST EM SET TIN G Use and buttons to select your need. Then press OK key to bring forth all the options for selecting.
DTV CONFIGURATION ENG 21 4:3 PS (Pan & Scan) 4:3 LB (Lette r Box) 16:9 (Wide Screen) Configuration Syst em Se tt i ng Aut o Sc an Ma nua l Sca n OS D Lan guag e Scree n F orm at T V Type Sta rt C hann el Set Scan Area Act ive A nt enna Passw ord Def aul t 4: 3PS 4: 3LB 16: 9 NOTE: If the screen format is incorrectly set, the images on the screen might be distorted or clipped out. Therefore, adjust the screen format wisely in order to get the perfect video display. The default is 4:3PS.
22 ENG DTV CONFIGURATION After pressing OK in the Start Channel state, the following picture will appear: M essage Box Enable/Disable St art Channel S ett ing YES NO Choose “YES” to show all the channels for selecting or “NO” to exit. Choos e Program 01 A 02 B 03 C 04 D You have to select one of them to be the First Channel when the unit is turned on. The default is NO. The selection action will be saved and become effective when turning on the unit next time.
DTV CONFIGURATION ENG 23 SET SCAN AREA Select the proper region according to the place you are located. After setting, press the AUTO SCAN key to scan the channels going on this region premise.
24 ENG DTV CONFIGURATION 1.Input your old password first. Old p ass w ord : 2.Enter the new password. New passw ord : * 3.Confirm your new password. Confi rm : * NOTE: 1. If the confirmed password differs from the new password, you have to reenter them until the two are the same. 2. The default password is 0000. DEFAULT Resume the factory settings.
DTV CONFIGURATION ENG 25 After pressing OK in the Default state, the following picture will appear: Me ss age B ox Reset to defau lt ! OK Canc el NOTE: The default settings action will resume all the factory settings, including the deletion of all the saved programs. A UT O S CAN Auto scanning. Scann ing .. .
26 ENG GAME Get to the game function from the main menu. You will find three kinds of games in DTV state. GAME Bo xM an Bu rn in g T et ri s Hi t R at B OX MA N Use , , and buttons to control the little man to move the boxes to the appointed place. Only one box can be moved at a time. S T E P 0 00 L EV E L 1 Press the MENU key to replay the current game and the OK key to play the higher level. Press EXIT to quit at any time. B UR N IN G T ETR IS 1. Use and to move Tetris left and right. 2.
GAME ENG 27 LE VE L 1 S COR E 0000 Press the MENU key to replay the current game and the OK key to pause/play the higher level. Press EXIT to quit at any time. HIT RA T Press 1,2,3,4,5,6,7,8,9 to hit the rat according to its corresponding directions of where it appears on the screen. Press EXIT to quit at any time. S CO RE 00 L E VE L 1 20 MOBILE ENTERTAINMENT PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.
28 ENG FM INSTRUCTIONS FM 1.Press the "ADJUST" button to pop out the menu of adjustment, OSD and FM. 2. Use the - / + buttons on the main unit board or remote control to choose FM, then press ADJUST enter button. FM 87.6 MH Z Ex it A ENT. 3. Use the - / + buttons to choose“ ON” , then press ADJUST enter button to enter frequency input mode. FM 87.6 MH Z Ex it A 4.
FM INSTRUCTIONS ENG 29 5. The input frequency range is from 87.6-107.9MHZ. The default is OFF. 6. If the input frequency is bigger than the maximum frequency it will output with the 107.9MHZ frequency. If the input frequency is smaller than the minimum frequency it will output with the 87.6 MHZ frequency. 7. Press ADJUST button to save the choice after selecting the preferable frequency within the permissible range. Then the player will transmit audio signal according to this frequency.
30 ENG OTHERS 31 DIMENSION AND P ARA MET ER Product name: TV850F Po wer supply: D C 12V Dimensi on: 2 30 x 1 70 x 26 mm Net weight: 6 35g MOBILE ENTERTAINMENT PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.
TECHNICAL INFORMATION ENG 31 T ROU BL E S H OOTING Ph enome non Soluti on 1. Check that the unit has been turned on, and that the No sound volume wheel is turned up. 2. Please scan channels before watching. 3. Check antenna is connected and working OK. 4. Check setup for correct TV regional setting system. No picture Sounds only with no picture Bad image 1. Check that the unit has been turned on. 2. Please scan channels before watching. 3. Check antenna is connected and working OK. 1.
T V 85 0 F -EN G -NB - A 2 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.
