Operation Manual

 ENG217

DVD

Basic Operation

Playback of Media from disc.

DivX

1. DVD mode is the default after power is switched ON, but can also be selected by pressing

MODE. Press

or to highlight DVD, then press OK.

2. Carefully Open the LCD screen and insert a disc on to the spindle with the label side facing

towards you.

Once the LCD screen is fully open, do not use force to open further

PLEASE NOTE:

Damage caused to the DVD player by opening the LCD screen beyond the design limit is not

covered under the manufacturers warranty.

3. Close the LCD screen. The player will load the disc and start playing.

4. Press once to stop playback; then press to resume playback from the point where

you stopped. Press

twice to stop playback completely.

5. During playback, press

to pause; press it again to resume playback.

6. When the playing is finished, please turn the power off by sliding the ON/OFF switch to OFF.

7. For some DVD discs with Title or Chapter menus, press the “MENU” button to enter the

menu page, and use

to select. Press ENTER to confirm.

Note

: Please do not disconnect USB devices or unplug SD/MMC cards whilst they are playing.

Functional failure may occur, with the possible loss of data from the USB stick or

SD/MMC card.

Play / Pause

Title

Navigation buttons

ENTER