Instruction Manual
INTRODUCTION TO USING AN IN-CAR CAM The iN-CAR CAM range of dash cams have been designed specifically with ease of use in mind, it is recommended NOT to change the default settings, which have been carefully selected to give the best performance for day to day use. Basic operation. The iN-CAR CAM is set to record video, in files of just 3 minutes in length. This means that each video file is a manageable size should you need to download and send to your insurance company.
TABLE OF CONTENTS INTRODUCTION TO USING AN IN-CAR CAM ............................................................. 03 TABLE OF CONTENTS ................................................................................................. 04 PRECAUTIONS ............................................................................................................. 05 CAUTIONS ON USING THIS PRODUCT ...................................................................... 05 PRODUCT SPECIFICATION ......................
PRECAUTIONS Please read this manual carefully before operation and keep it for future reference. It will be helpful should you encounter any operational problem. WARNING: Do not expose this product to rain, moisture or water under any circumstances, doing so may result in the risk of electric shock or fire. CAUTION: To reduce the risk of electric shock, do not perform any servicing other than that contained in the instruction manual unless you are qualified to do so.
PRODUCT SPECIFICATION Model Number / Name NBDVR312GW / NEXTBASE iN-CAR CAM DELUXE Power Requirements 5V / 1.5A Power Supply 12-24Vdc Car Power Cable (supplied) Fuse Type: 32mm / 2A Output: 5Vdc Sensor Resolution 3M Pixel (3,000,000 Pixel) Lens Type / Angle / Aperture 6G / 140° / F1.8 Recording Resolution 1920 x 1080 @ 30fps (default) Screen Size 2.
PACKAGE CONTENTS Please check the contents of your iN-CAR CAM product.
POWERED GPS MOUNT Please see below to identify the parts of the supplied powered mount. 5 1 4 2 3 1. Locking lever The locking lever is used to attach and release the window mount to your vehicles windscreen. Pull the lever down to prepare the window mount for use. Once the mount is firmly upon the windscreen (in a suitable location) push the lever to lock the mount in place. 2. Locking ring Loosen the locking ring to adjust the iN-CAR CAM position if required, remembering to re-tighten before use.
CAMERA - PARTS & CONTROLS Please see below to identify the parts and controls of your iN-CAR CAM. Front: 1 2 3 1. Mounting point (located under dust cover) After removing the dust cover, attach the supplied powered GPS mount here. 2. Camera lens Wide Angle 140°, 6 Element glass lens for optimum picture quality. 3. Speaker Integral speaker for audio playback directly from the iN-CAR CAM.
CAMERA - PARTS & CONTROLS (CONTD.) Back: 4 10 5 11 6 7 12 8 9 4. Power On / Off button Press and hold for 3 seconds to turn on / off the iN-CAR CAM. 5. Up / Microphone Off button Up: Press to navigate up within menus and to move to the previous file when in playback mode. Microphone Off: Press to turn off / on the microphone (audio recording), only available whilst in video mode. 6.
CAMERA - PARTS & CONTROLS (CONTD.) Continued from previous page. 4 12 5 11 6 7 10 8 9 8. Dual colour LED indicator Red = power on Red flashing = recording Blue = battery charging 9. Screen 2.7' LCD colour screen for the viewing of recorded files on the iN-CAR CAM. 10. Mode / Screen Capture button Mode: Press to change between video, photo or playback modes. Screen capture: Whilst recording press to save a screen capture of the current frame. 11.
CAMERA - PARTS & CONTROLS (CONTD.) Top: 13 14 13. AV Out socket Used to connect your iN-CAR CAM to a television using an AV Cable (sold separately). 14. DC-IN & USB socket Connect the supplied car power cable or USB data cable here. Note: - Normally the car power cable is connected to the mount when in use, not directly to this socket. Bottom: 15 16 15. Microphone Integral microphone for audio recording. 16.
CAMERA - PARTS & CONTROLS (CONTD.) Sides: 17 18 17. Serial Number sticker Please keep a record of your iN-CAR CAMs serial number, this may be required should you seek technical support. 18. MicroSD Card slot Insert the MicroSD card here, taking care that the gold contacts are facing towards the back of the iN-CAR CAM.
IN VEHICLE INSTALLATION Please follow the instructions below for first-time installation of the iN-CAR CAM. For day to day use simply remove the camera from the mount as required. 1. Insert MicroSD Card Insert a suitable MicroSD card (Class 10 48/Mbps) in to the iN-CAR CAM, taking care that the gold contacts are facing towards the LCD screen side of the iN-CAR CAM. Push the memory card until it clicks into place.
IN VEHICLE INSTALLATION (CONTD.) 3. Attach the mount to the iN-CAR CAM Slide the iN-CAR CAM onto the mount. Once attached magnets within the mount will hold the two parts together. 4. Attach the mount to the windscreen Remove the protective plastic film from the suction cup of the mount. Select a suitable position for the mount and clean the windscreen with a dry / clean cloth to achieve a good contact between the glass and suction cup.
IN VEHICLE INSTALLATION (CONTD.) 5. Connect car power cable Connect the supplied car power cable to DC-IN socket of the mount. Plug the power cable into the 12-24Vdc outlet of your vehicle. 12-24V DC The above diagram is for illustration purposes only. The iN-CAR CAM will automatically power on and start recording once power is available. In some vehicles this will be when connections are made, for others the iN-CAR CAM will power on once the ignition has been turned on.
IN VEHICLE INSTALLATION (CONTD.) Please read and follow the notes below for the safe operation of your iN-CAR CAM within your vehicle. As per the installation instructions, you must install the iN-CAR CAM so it does NOT obstruct the drivers view of the road, preferably on the passenger side of the vehicle and behind the rear view mirror.
VIDEO MODE The key below explains the various information displayed on the screen when your iN-CAR CAM is in Video mode, some icons will only be displayed once the relevant function has been selected within the Video menu, as described below. 1 2 3 4 5 6 7 8 14 13 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 12 10 11 9 Mode: indicates the iN-CAR CAM is in Video mode. Recording: appears on screen when recording is in progress. Resolution: displays the current resolution.
VIDEO MODE (CONTD.) Video Menu The Video Menu is accessed by pressing the MENU button whilst in video mode. Video Menu Resolution Exposure Audio Recording Video Length Number Plate MENU Back OK Enter The default settings have been carefully selected to allow you to use the iN-CAR CAM without the need to change any settings. However, should you wish to change a setting then please see below.
VIDEO MODE (CONTD.) Continued from previous page. Video Menu Resolution Video Length Exposure Parking Mode Audio Recording Rotate Display Video&Length Time Date Stamp MENU 5. Back OK Enter Video Length Select the duration of the individual recorded video files. The iN-CAR CAM will continue recording, filling the memory card. When the memory card becomes full, the oldest file will be automatically deleted to make space for the new recording. Note: - Protected files will never be deleted.
VIDEO MODE (CONTD.) Continued from previous page. Video Menu Resolution Speed Stamp Exposure GPS Location Stamp Audio Recording Nextbase Stamp Video G Sensor Length MENU 9. Back OK Enter Speed Stamp Turn On / Off the Speed Stamp shown on recorded files. Options: On and Off Default Setting: On 10. GPS Location Stamp Turn On / Off both the GPS co-ordinates and speed stamp that are shown on recorded files.
PHOTO MODE Press the MODE button to select Photo mode. The key below explains the information displayed on the screen when your iN-CAR CAM is in Photo mode. 1 2 6 1. 2. 3. 4. 5. 6. 5 3 4 Mode: indicates the iN-CAR CAM is in Photo mode. Exposure: displays current exposure level setting. Date: current date. Time: current time. Memory Card: indicates whether a memory card is present. Battery: indicates whether iN-CAR CAM is running on battery or external power.
PHOTO MODE (CONTD.) Photo Menu The Photo Menu is accessed by pressing the MENU button whilst in photo mode. Video Menu Photo Resolution Exposure Exposure Time & Date Stamp Audio Recording Video Length MENU Back OK Enter The default settings have been carefully selected to allow you to use the iN-CAR CAM without the need to change any settings. However, should you wish to change a setting then please see below.
PLAYBACK MODE Press the MODE button to select Playback mode, the iN-CAR CAM will display the last recorded file. Dependent on the type of file, the on-screen information and playback functions differ. Video Files: 2 3 2015_1209_184030_003A 2355 1 9 OK:: // IIII OK 8 MODE:: MODE 1:06 4 23:55:54 06/01/2015 /2015 5 6 :NEXT PREV :PREV NEXT 7 1. 2. 3. 4. 5. 6. 7. 8. 9. Mode: indicates the iN-CAR CAM is in Playback mode. File type: indicates whether a video or photo file is being viewed.
PLAYBACK MODE Photo Files: 2 3 1 2355 2015_1209_184030_003A 9 23:55:54 06/01/2015 /2015 8 OK : / II MODE : : NEXT PREV 7 1. 2. 3. 4. 5. 6. 7. 8. 9. 4 5 : NEXT 6 Mode: indicates the iN-CAR CAM is in Playback mode. File type: indicates whether a video or photo file is being viewed. File number: displays current file number. Time: displays the time that the current image was taken. Date: displays the date that the current image was taken. Next: press the down button to move to previous file.
PLAYBACK MODE (CONTD.) Deleting files: Highlight the Delete Files option and press the OK button.
PLAYBACK MODE (CONTD.) Protecting files: Highlight the Protect Files option and press the OK button.
SETUP MENU Setup Menu The Setup Menu is accessed by pressing the MENU button twice. Video Menu Setup Resolution WiFi Exposure Format SD Card Audio&Recording Time Date Video Length Times Zones / DST MENU Back OK Enter The default settings have been carefully selected to allow you to use the iN-CAR CAM without the need to change any settings. However, should you wish to change a setting then please see below.
SETUP MENU (CONTD.) Continued from previous page. Video Menu Setup Resolution Language Exposure Speed Units Audio Recording Screen Saver Video Length Device Sounds MENU 5. Back OK Enter Language Select preferred language. Options: English, Dansk, Deutsch, Español, Français, Nederlands, Norsk, Suomi, Svenska and Italiano Default Setting: English 6. Speed Units Select whether to record and display speed in KMH or MPH. Options: KMH and MPH Default Setting: MPH 7.
SETUP MENU (CONTD.) Continued from previous page. Resolution Auto Power Off Exposure System Info Audio Recording Default Settings MENU 9. Back OK Enter Auto Power Off Adjust the timing of the Auto Power Off function, this can be used to continue recording in event of loss of power within the vehicle. Options: 10 Seconds, 1 Minute and 2 Minutes Default Setting: 10 Seconds 10. System Info Version: The installed software version of your iN-CAR CAM is displayed here.
MASS STORAGE & PC CAMERA Use the supplied USB cable to connect the iN-CAR CAM directly to your PC via the do NOT connect the USB cable to the Powered Mount. socket, Once connected the iN-CAR CAM will turn on with three options available, as described below. Use the UP and DOWN buttons to select required function and press OK to confirm selection. - Mass Storage - PC Camera - Power On Mass Storage (Windows) When this option is selected, the iN-CAR CAM will function as a card reader for your PC.
VIDEO & AUDIO OUTPUT The iN-CAR CAM can be connected to external video equipment, such as a television or a monitor within your vehicle that uses standard RCA inputs. Connect the AV cable (sold separately) between the iN-CAR CAM and your external device, then turn on the iN-CAR CAM. The screen on the iN-CAR CAM will be blank as the video image is now being sent to the external device, the red power LED on the iN-CAR CAM will be lit indicating the unit is turned on.
WIFI APPLICATION AN INTRODUCTION Introduction to the Cam Viewer App Using the Wi-Fi function of the iN-CAR CAM with the Nextbase Cam Viewer App allows you to connect your phone or tablet device to the iN-CAR CAM. The Cam Viewer App has three primary functions: Live View This allows you to view the live image from the iN-CAR CAM and make recordings. Playback Control and view playback of recordings on your device directly from the iN-CAR CAM.
WIFI APPLICATION FOR SMARTPHONES & TABLETS Installing the Cam Viewer App The Nextbase Cam Viewer App is available for free download from the Google Play Store (Android) and the App Store (iOS). The App can easily be found by searching for 'Nextbase Cam Viewer' within your chosen store. Once installed Cam Viewer will be available on your device. Cam Viewer Connect your phone to the iN-CAR CAM.
WIFI APPLICATION FOR SMARTPHONES & TABLETS (CONTD.) Once opened the 'Startup Screen' will be shown, from which there are two options available Continue and Settings. Unable to connect to iN-CAR CAM Open Settings to connect to iN-CAR CAM using WiFi Continue Settings Continue This option is used when you wish to use Cam Viewer to manage files that have already been downloaded from the iN-CAR CAM to your phone. Settings This option is used when you wish to connect your phone to the iN-CAR CAM.
WIFI APPLICATION FOR SMARTPHONES & TABLETS (CONTD.) Once connected, the 'Home' screen will open, as shown below. 00:45 24% Cam Viewer Live View NBDVR312GW 16:04:37 14/10/2014 12345678 30MPH N52° 41’ 33.15” W62° 42’ 33.15” Local Files Files on Camera Settings From the 'Home' screen you can access all the functions and features available within Cam Viewer.
WIFI APPLICATION FOR SMARTPHONES & TABLETS (CONTD.) Live View Select 'Live View' to see the live image from the iN-CAR CAM on your phone. Rotate your phone to allow the Live View to become full screen. It is from 'Live View' that you can start and stop recording or take a photo, by pressing the red button. < Cam Viewer NBDVR312GW 16:04:37 14/10/2014 Live View 12345678 30MPH N52° 41’ 33.15” W62° 42’ 33.
WIFI APPLICATION FOR SMARTPHONES & TABLETS (CONTD.) Files on Camera Manage the files that are currently stored on the memory card that is within the iN-CAR CAM, this option will only be available when your phone is connected to the iN-CAR CAM. 14:55 < Cam Viewer Files on Camera 22 Mar 2016 08:21 219.1 MB 22 Mar 2016 14:52 221.5 MB 25 Mar 2016 17:32 217.3 MB 26 Mar 2016 10:45 NBDVR312GW 16:04:37 14/10/2014 12345678 30MPH N52° 41’ 33.15” W62° 42’ 33.15” 1.9 MB 30 Mar 2016 15:51 214.
WIFI APPLICATION FOR SMARTPHONES & TABLETS (CONTD.) Playback Tap the chosen file to start playback, rotate your phone to become full screen. 12:58 Done 0:48 24% 3:00 Tapping the screen will make the playback controls appear. Press the pause button to pause playback and use the progress bar to move to different points in the video. Press 'Done / Back' to return to the Files on Camera screen.
WIFI APPLICATION FOR SMARTPHONES & TABLETS (CONTD.) File Management The Files on Camera screen has three icons at the bottom of the screen: Download Protect Delete These are explained in detail in the he following pages. Select the required option by tapping the relevant icon, this will open the 'File Select” screen, as shown below. 14:55 Cancel 24% Files on Camera Done 22 Mar 2016 08:21 219.1 MB 22 Mar 2016 14:52 221.5 MB 25 Mar 2016 17:32 217.
WIFI APPLICATION FOR SMARTPHONES & TABLETS (CONTD.) File Management continued. Tap on a file to select, the file will become highlighted and marked with a tick, as shown below. 14:55 Cancel 24% Files on Camera Done 22 Mar 2016 08:21 219.1 MB 22 Mar 2016 ü 14:52 221.5 MB 25 Mar 2016 17:32 217.3 MB 26 Mar 2016 10:45 NBDVR312GW 16:04:37 14/10/2014 12345678 30MPH N52° 41’ 33.15” W62° 42’ 33.15” 1.9 MB 30 Mar 2016 15:51 214.
WIFI APPLICATION FOR SMARTPHONES & TABLETS (CONTD.) Download Select this option to download a recording to your phone, the progress box will appear when the download starts. 14:57 < Cam Viewer 24% Files on Camera 22 Mar 2016 08:21 219.1 MB 22 Mar 2016 14:52 221.5 MB Downloading (1/1) (Tap to cancel) 26 Mar 2016 10:45 NBDVR312GW 16:04:37 14/10/2014 12345678 30MPH N52° 41’ 33.15” W62° 42’ 33.15” 1.9 MB 30 Mar 2016 15:51 214.7 MB Tap the progress box to cancel the download.
WIFI APPLICATION FOR SMARTPHONES & TABLETS (CONTD.) Local Files It is from the 'Local Files' directory that you can upload recordings to our secure server, by using the upload icon. 12:56 < Cam Viewer Local files 25 Mar 2016 17:32 217.3 MB 30 Mar 2016 15:51 214.
WIFI APPLICATION FOR SMARTPHONES & TABLETS (CONTD.) If you are connected to the dash cam when 'upload' is selected, the message shown below will appear. 12:56 < Cam Viewer 24% Local files 25 Mar 2016 17:32 217.3 MB Please disconnect your iPhone from 30 the Mar iN-CAR CAM 2016 and return to your preferred 15:51 network to upload 214.7 MBfiles. Please note that using your mobile data plan for upload purposes may result in additional charges.
WIFI APPLICATION FOR SMARTPHONES & TABLETS (CONTD.) Tap on a file to select and press 'Done/Confirm' to start the download or press Cancel/Back to cancel the action. Once an upload has started the 'Upload History' screen will open, as shown below. 12:57 24% < Local Files Upload History Currently uploading 1 file. 2016_0323-100117.. 63 KB of 214.7 MB The upload progress can be seen in the white text during the upload process.
WIFI APPLICATION FOR SMARTPHONES & TABLETS (CONTD.) To cancel an upload, swipe left on the file and tap delete. 12:57 24% < Local Files Upload History Currently uploading 1 file. 2016_0323-100117.. 63 KB of 214.
WIFI APPLICATION FOR SMARTPHONES & TABLETS (CONTD.) Once the upload is completed the file will be marked with a tick, as shown below. 12:57 24% < Local Files Upload History The upload queue is empty. Pending uploads will appear in the list. 2016_0323-1001.. Expires in 30 days ü Note: - When uploading files it is recommended to only select one file at a time, this will reduce the upload time. - The time taken to upload a file is dependent on your network.
WIFI APPLICATION FOR SMARTPHONES & TABLETS (CONTD.) To send a link that can be used to download the recording tap the chosen file, this will give you the option to share this link with a variety of applications that are on your phone. The below images show the link being sent using email with an iOS phone. 12:58 12:59 24% Cancel < Local Files Upload History The upload queue is empty. Pending uploads will appear in the list. 24% New Message To: Cc/Bcc: Subject: https://db.
PLAYBACK SOFTWARE FOR WINDOWS This section will guide you through using the supplied playback software, enabling the viewing of recorded files as well as checking journey route and GPS data (location and speed) information.
PLAYBACK SOFTWARE FOR WINDOWS (CONTD.) Using the player: Connect the iN-CAR CAM to your computer using the supplied USB cable, select Mass Storage and press ‘OK’ (upon the iN-CAR CAM). Once connected, the memory card which is labeled 'NEXTBASE' and its contents will be available to view upon your PC, as a new drive, when using Windows explorer. Close any pop up messages and/or any media players which may automatically open when video or photo files stored upon a memory card are detected.
PLAYBACK SOFTWARE FOR WINDOWS (CONTD.) Select MPH or KMH: The Player can be set to display speed in either MPH or KMH. The player should use the same speed measurement type as used on the iN-CAR CAM. To make any changes, simply click ‘View’ in the top left of the window, select ‘Measurement’ and then click on ‘British systems (feet, miles)’ or ‘Metric systems (meters, kilometers)’ as required, see image below.
PLAYBACK SOFTWARE FOR WINDOWS (CONTD.) Basic features and controls The information given below outlines the basic features and controls of the player. 1 2 NEXTBASE 30/12/2015 09:54:31 26MPH NBDVRDUO 9 3 8 4 60 30 0 0 5 6 7 1. Player settings File: Browse for files stored on your computer View: Player settings Playback: Advanced playback controls Zoom: Advanced zoom controls ?: Registrator Viewer Help information 2.
PLAYBACK SOFTWARE FOR WINDOWS (CONTD.) Basic features and controls continued 1 2 NEXTBASE 30/12/2015 09:54:31 26MPH NBDVRDUO 9 3 8 4 60 30 0 0 5 6 7 7. Speed Displays speed. 8. Play list Displays videos currently within the play list. Note: - Videos are NOT imported here, but listed for playback from their original source location 9. Map Displays route travelled on map, only available when the video was recorded when a satellite connection was present.
PLAYBACK SOFTWARE FOR MAC This section will guide you through using the supplied playback software, enabling the viewing of recorded files as well as checking journey route and GPS data (location and speed) information. MInimum system requirements: OS X 10.
PLAYBACK SOFTWARE FOR MAC (CONTD.) Using the player: Connect the iN-CAR CAM to your computer using the supplied USB cable, select Mass Storage and press ‘OK’ (upon the iN-CAR CAM). Once connected, the memory card which is labeled ‘NEXTBASE’ and its contents will be available to view upon your Mac, as a new drive. The alternative method to access the recorded files is to remove the MicroSD Card from your iN-CAR CAM and using a suitable MicroSD adaptor insert it directly to the card reader on your Mac.
PLAYBACK SOFTWARE FOR MAC (CONTD.) Select MPH or KMH: The Player can be set to display speed in either MPH or KMH. The player should use the same speed measurement type as used on the iN-CAR CAM. To make any changes, simply click ‘View’ in the top left of the window, select ‘Measurement System’ and then click on ‘UK/US (feet, mile)’or ‘Metric (meter, kilometer)’ as required, see image below.
PLAYBACK SOFTWARE FOR MAC (CONTD.) Basic features and controls The information given below outlines the basic features and controls of the player. 1 2 NEXTBASE 30/12/2015 09:54:31 26MPH NBDVRDUO 7 3 4 5 6 1. Player settings Datakam Player: Player information File: Browse for files stored on your computer Playback: Advanced playback controls View: Player settings Help: Search / view the help menu for the player operation 2.
PLAYBACK SOFTWARE FOR MAC (CONTD.) Basic features and controls continued 1 2 NEXTBASE 30/12/2015 09:54:31 26MPH NBDVRDUO 7 3 4 5 6. 6 Play list Displays videos currently within the play list. Note: - Videos are NOT imported here, but listed for playback from their original source location. 7. Map Displays route travelled on map, only available when the video was recorded when a satellite connection was present.
TROUBLE SHOOTING PROBLEM SOLUTION Video Image is blurred. Remove the protective lens cover, clean the lens, clean the windscreen! I cannot insert the Micro SD card. Micro SD card are very small and require delicate use. Align the card with the diagram shown upon the iN-CAR CAM and insert the card until you feel a slight spring resistance. You now need to push the card, using your finger nail, until you hear and feel a small latch. Release pressure and the card will stay retained within the device.
TROUBLE SHOOTING (CONTD.) PROBLEM My iN-CAR CAM shuts down by itself after a while. SOLUTION Either the battery has gone flat, or there is no power to the iN-CAR CAM and the AutoPower Off period has been triggered. No power to my iN-CAR CAM, The cigarette power cable is not working. Inspect the fuse in the but it works upon my PC. Car Power plug. Replacement fuse = 2A 32mm type. If the fuse is found to be blown, inspect the power cable for damage which may have caused the fuse blow.
TROUBLE SHOOTING (CONTD.) PROBLEM SOLUTION When I press the MENU button nothing happens. This is normal during recording. Stop the recording before pressing the MENU button. If recording re-starts before you can press MENU, then see the Parking Mode section above. Downloading files from www.nextbase.co.uk using Google Chrome results in a Malicious Software message.
NOTES 62
www.nextbase.co.
