Operation Manual

VIDEO MODE (CONTD.)
Continued from previous page.
9. Nextbase Stamp
Turn On / Off the NEXTBASE Stamp shown in the top left corner of recorded files.
Options: On and Off
Default Setting: On
10. G Sensor
Turn Off or adjust the sensitivity of the built in G Sensor. The G Sensor detects forces which
will automatically protect the current recording in event of a collision.
Options: High, Medium, Low and Off
Default Setting: Medium
Note:
- When the 'Protect' function is activated within the first third of a recording, the previous
recording will also be protected.
- When the 'Protect' function is activated within the final third of a recording, the next
recording (if recording continues) will also be protected.
Note:
- Within the Setup Menu which is accessed by pressing the MENU button twice, there is
a ‘Default Settings’ option to allow you to reset the iN-CAR CAM to the factory defaults,
if required.
21
Back
MENU
Enter
OK
Video Menu
Nextbase Stamp
G Sensor