Owner's Manual

622
GW
Installation and Positioning:
Simply plug the Rear View Camera into your Dash Cam using the socket on the right hand side,
ensuring that the lens is facing backwards, into your vehicle.
Rear View Cameras
Before attaching any Rear View Cameras, ensure that the Dash Cam is switched OFF. Do not turn the Dash
Cam ON until the Rear View Camera is securely attached. When a Rear Cam is used with your Dash Cam, a
U3 SD-Card is required.
04
Cabin View Camera
The Cabin View Camera is a compact accessory that neatly attaches to your Dash Cam. The wide 140°
angle lens allows you to view and record the interior of your vehicle in addition to the road ahead,
providing an extra level of security for you and your passengers.
622
GW
Night Vision Cabin View Camera
The Night Vision Cabin View Camera can record clearer night-time video than the Cabin View Camera
(above). It records full colour video during daylight, and at night switches to recording infrared video, clearly
capturing the interior of your vehicle.
When adjusting the angle of the lens, to avoid damaging components in the cameras, use both
hands to steady the Rear View Camera. Where possible, adust the lens position on the Rear View
Camera before attaching to your Dash Cam.
Below is a suggested position for your Dash Cam with Rear View Camera attachment. Ensure that
both the Dash Cam and Rear Facing Camera’s lines of sight are unobstructed by in-car objects, such
as the rear view mirror.
622
GW
Rear View Camera
The Rear View Camera is a compact accessory that neatly attaches to your Dash Cam to allow you to view
and record out of the rear of your vehicle in addition to the road ahead, making sure you’re protected
against tailgaters and rear-end impacts.