Instruction Manual
TABLE OF CONTENTS PRECAUTIONS ............................................................................................................... 04 CAUTIONS ON USING THIS PRODUCT......................................................................... 04 PRODUCT SPECIFICATION ........................................................................................... 05 PACKAGE CONTENTS ................................................................................................... 06 PRODUCT FEATURES ......
PRECAUTIONS Please read this manual carefully before operation and keep it for future reference. It will be helpful should you encounter any operational problem. WARNING: Do not expose this product to rain, moisture or water under any circumstances, doing so may result in the risk of electric shock of fire. CAUTION: To reduce the risk of electric shock, do not perform any servicing other than that contained in the instruction manual unless you are qualified to do so.
PRODUCT SPECIFICATION Model Number / Name NBDVR202 / NEXTBASE iN-CAR CAM 202 Lite Power Requirements 5V / 200mA Power Supply 12-24Vdc Car Power Cable (supplied) Fuse Type: 20mm Glass Fast Blow 2A Output: 5Vdc Sensor Resolution 1M Pixel (1,000,000 Pixel) Lens Type / Angle / Aperature 4G / 120° / F2.0 Recording Resolution (Max.) 1920 x 1080 @ 25fps Recording Resolution (Default) 1280 x 720 @ 30fps Recording Format AVI Screen Size / Ratio 2.
PACKAGE CONTENTS Please check the contents of your iN-CAR CAM product package. iN-CAR CAM Mount Manuals Disk Quick Start Guide Car Power Cable USB Cable Product appearance may differ slightly to that shown above. PRODUCT FEATURES Thank you for purchasing this NEXTBASE iN-CAR CAM product, in this section we will outline some of the features available with this device. 2.7" 16:9 LCD Colour Screen Large screen for ease of use and viewing the playback of both videos and photos. 1.
PARTS AND CONTROLS Please see below for a guide to the parts and controls of your iN-CAR CAM. 6 1 7 8 9 10 11 12 13 14 3 4 5 2 ON CHARGE RESET NBDVR202 AV HD OUT 15 16 17 18 1. OK Press to confirm selection or to start / stop a recording. 2. POWER Press and hold for 2 seconds to turn on / off. 3. IR LEDS Turn on/off within Setup menu to enable enhanced short range night time recording. 4. LENS 5. SPEAKER 6. MOUNTING POINT Attached supplied mount here. 7. MINI USB 2.
PARTS AND CONTROLS (CONTD.) 6 1 7 8 9 10 11 12 13 14 3 4 5 2 ON CHARGE RESET NBDVR202 AV HD OUT 15 16 17 18 11. DOWN Press to zoom out when in video & photo modes and to navigate down within menus. 12. MENU Press to open the Menu within current mode. Press twice to open the Setup menu (menus are not available whilst recording). Note: - Press and hold briefly during a recording to ‘Protect File’. 13. MICROPHONE Turn on/off within Setup menu to enable audio recording. 14. SCREEN 15.
IN VEHICLE INSTALLATION The above diagram is for illustration purposes only. 1. Insert a suitable memory card (Class 6 or higher) in to the iN-CAR CAM, taking care to follow correct orientation markings (gold contacts facing the back of the device). Push the memory card until it clicks into place. Do not remove or insert the memory card when the iN-CAR CAM is powered on, this may damage the memory card.
IN VEHICLE INSTALLATION (CONTD.) Please read and follow the notes below for the safe operation of your iN-CAR CAM within your vehicle. As per the installation instructions, it is advised to install the iN-CAR CAM so it does NOT obstruct the drivers view of the road, preferably on the passenger side of the vehicle and behind the rear view mirror.
VIDEO MODE The key below explains the various information displayed on the screen when your iN-CAR CAM is in Video mode, some icons will only be displayed once the relevant function has been selected within the Video menu, as described further down this page. 1 2 3 4 5 6 7 15 14 13 8 12 9 11 10 1. Video Mode Icon: Indicates the iN-CAR CAM is in Video mode. 2. Recording Indicator: Flashes red when a recording is in progress. 3.
PHOTO MODE The key below explains the various information displayed on the screen when your iN-CAR CAM is in Photo mode, some icons will only be displayed once the relevant function has been selected within the Photo menu, as described further down this page. 1 2 2 12 + -0 11 AWB 3 )) 4 5 2 01234 5M 6 7 8 10 ISO 9 AUTO 1. Photo Mode Icon: Indicates the iN-CAR CAM is in Photo mode. 2. Capture Mode Icon: Displayed on screen when Capture Mode (timer) is selected from within the Photo menu. 3.
PLAYBACK MODE The iN-CAR CAM can display Videos and Photos stored upon the SD card when in Playback Mode. The displays for video and photo playback differ slightly, please refer to the relevant section Video Playback When a video is detected upon the SD Card, the screen below is shown. The key below explains the various information displayed on the screen, during video playback and how to use the control buttons. 2 1 6 5 720P 3 4 01/01/2013 23:59:59 OK: /II MODE: UP: DOWN: 1.
PLAYBACK MODE (CONTD.) Photo Playback When a photo is detected upon the SD Card, then the screen below is shown. The key below explains the various information displayed on the screen, during photo playback. 2 3 4 1 5 1. Photo Playback Icon: Indicates the iN-CAR CAM is displaying a photo in the Playback mode. 2. Protected File Icon: Displayed when a photo file has been protected by selecting ‘Protect’ from within the playback menu. 3. File Number: Displays current file number. 4.
MENUS AND SETTINGS Each mode (Video, Photo and Playback) has a menu used to access the various options and settings, press the MENU button on the rear of the device to access the menu, specific to the current mode selected. Use the UP, DOWN buttons to select chosen option and press the OK button to confirm. Note: - Menus are not accessible whilst the iN-CAR CAM is recording, stop recording prior to pressing the‘MENU’ button. 1. VIDEO MODE 1.
MENUS AND SETTINGS (CONTD.) 2. PHOTO MODE 2.1 Capture Mode Set the timer for delayed shutter function, can be used for self-protrait or group shots. Default Setting: Single (instant photograph taking) 2.2 Resolution Select resolution, this will increase or decrease the quality of the recorded image. Default Setting: 5M 2592 x 1944 2.
MENUS AND SETTINGS (CONTD.) 3. PLAYBACK MODE The playback menu is the same when viewing either videos or photos. 3.1 Delete Used to delete either the current file, also available is the option of deleting all files 3.2 Protect Used to lock or unlock either the current file, also available is the option of locking and unlocking all files 3.3 Slide Show Used to start a slide show of images stored on the SD card, press the Menu button to exit the slide show. 4.
MENUS AND SETTINGS (CONTD.) 4.7 TV Mode Set the TV Mode as required. Default Setting: PAL 4.8 Frequency Set the Frequency as required. Default Setting: 50Hz 4.9 Format Format the inserted memory card, this will delete all content. This is a good practice monthly, to ensure your SD card performs to it’s full potential. 4.10 Default Setting Reset the device to the default settings. 4.11 Version Displays the version number of your device’s software.
PC CONNECTION Connecting the iN-CAR CAM to a Windows based PC using the supplied USB Cable will automatically trigger the iN-CAR CAM to display the two options of: - Mass Storage - PC Camera Use the UP and DOWN buttons to select preferred option and OK to confirm. Mass Storage If Mass Storage is selected, the iN-CAR CAM screen will show the words ‘Mass Storage’ and then take the function of a card reader for your PC. Upon your PC an extra drive will appear (e.g.
TROUBLE SHOOTING PROBLEM SOLUTION Video Image is blurred. Remove the protective lens cover, clean the lens, clean the windscreen inside and out. Video recording is jumpy or freezes. Remove the SD card and reformat to remove non-contiguous files. For best recording use a branded class 10 type (30MB/) SD card of 8 to 32GB recommended size. Playback PC may not be sufficient for the playback software, try an alternative PC. Copy video files onto the PC / Mac for playback.
TROUBLE SHOOTING (CONTD.) PROBLEM SOLUTION The SD card in my Use a good quality branded SD card between 8GB and 32GB iN-CAR CAM can not be read. (suggested) and format the card from with in the SETUP menu of the iN-CAR CAM. Use a full sized SD card where possible, not a MicroSD card and adaptor. I can't delete files on my SD card within the iN-CAR CAM. Check to see if these files are 'protected', if so please follow instructions to 'un-protect'. The screen blanks after a few minutes upon my iN-CAR CAM.
NOTES 22
www.nextbase.co.
