Instruction Manual
TABLE OF CONTENTS PRECAUTIONS ..................................................................................................... 04 PRODUCT SPECIFICATION ................................................................................. 05 PACKAGE CONTENTS ......................................................................................... 06 PRODUCT FEATURES ......................................................................................... 07 PARTS AND CONTROLS ...............................
PRECAUTIONS Please read this manual carefully before operation and keep it for future reference. It will be useful should you encounter any operational problem. WARNING: Do not expose this product to rain, moisture or water under any circumstances, doing so may result in the risk of electric shock or fire. CAUTION: To reduce the risk of electric shock, do not perform servicing other than that contained in the instruction manual, unless you are qualified to do so.
PRODUCT SPECIFICATION Model Number / Name NBDVR101 / NEXTBASE iN-CAR CAM 101 Go Power Requirements 5V / 150mA Power Supply 12-24Vdc Car Power Cable (supplied) Fuse Type: 20mm Glass Fast Blow 2A Output: 5Vdc Sensor Resolution 1M Pixel (1,000,000 Pixel) Lens Type / Angle / Aperature 4G / 120° / F2.0 Recording Resolution (Default) 1280 x 720 @ 30fps Recording Format AVI Screen Size / Ratio 2.
PACKAGE CONTENTS After unpacking please check the contents of your iN-CAR CAM product package, as listed below. iN-CAR CAM Mount Car Power Cable USB Cable Quick Start Guide Instruction Manual Instruction Manual Product appearance may differ slightly to that shown above.
PRODUCT FEATURES Thank you for purchasing this NEXTBASE iN-CAR CAM product, in this section we will outline some of the features available with this device. 2" 4:3 LCD Colour Screen Large screen for ease of use and viewing the playback of both recorded videos and photos. 1.0M PIXEL CMOS Sensor Provides high quality recording up to 1280 x 720 HD. 120° Wide Angle Lens Wide angle lens to allow best possible recording of the vista ahead.
PARTS AND CONTROLS 3 6 AV-OUT 2 4 5 MODE 1 14 11 10 9 8 7 13 RESET MIC 12 1. POWER / MODE Power: Press and hold for 2 seconds to turn On / Off the iN-CAR CAM. 5. MEMORY CARD SLOT Insert MicroSD card here. Compatible with SDHC <=32GB, Class 6-10. 6. DUAL COLOUR LED INDICATOR RED = Power On RED Flashing = Recording Mode: Press to select Video, Photo or Playback mode. BLUE = Battery Charging 2. MINI USB SOCKET Connect the supplied car power cable here.
PARTS AND CONTROLS (CONTD.) 3 6 AV-OUT 2 4 5 MODE 1 14 11 10 9 8 7 13 RESET MIC 12 10. MENU / SCREEN SAVER (contd.) Screen Saver: Press and hold for 2 seconds whilst recording to turn on the screen saver function. Press any button to re-activate screen. 8. MICROPHONE / DOWN Microphone: Press whilst recording to turn off audio recording, press again to turn back on. Down: Press to navigate down within menus. 11. LENS 12.
IN VEHICLE INSTALLATION Diagram is for illustration purposes only. 1. Insert a suitable MicroSD card (Class 6 or higher), taking care that the gold contacts are facing the screen. Push the memory card until it clicks into place. Do not remove or insert the memory card when the iN-CAR CAM is powered on, this may damage the memory card. Note: - Use the edge of a small coin (or similar object) to push the memory card in place if required, a second push inwards will release the memory card. 2.
IN VEHICLE INSTALLATION (CONTD.) Diagram is for illustration purposes only. 4. Connect the supplied car adaptor to the iN-CAR CAM and then connect to the 12-24Vdc outlet of your vehicle. The device will automatically power on and start recording once power is available. In some vehicle’s this will as soon as the car adaptor is plugged in, for others the iN-CAR CAM will power on once the ignition has been turned on. Note: - Do NOT wire the iN-CAR CAM directly to a 12V supply or damage will result.
INSTALLATION NOTES Please read and follow the notes below for safe operation of your iN-CAR CAM within your vehicle. As per the supplied installation instructions, it is advised to install the iN-CAR CAM so it does NOT obstruct the drivers view of the road, preferably on the passenger side of the vehicle and behind the rear view mirror.
VIDEO MODE The key below explains the various information displayed on the screen when your iN-CAR CAM is in Video mode, some icons will only be displayed once the relevant function has been selected within the Video menu, as described further down this page. 1 2 REC 10 3 4 00:02:51 SD HD 9 8 7 6 5 1. Video Mode Icon: Indicates the iN-CAR CAM is in Video mode. 2. Recording Indicator: Shown on screen when a recording is in progress. 3. Recording Time: Displays the length of current recording.
VIDEO MODE SETTINGS To access the Video Mode settings, press the MENU (M) button. Use the up and down buttons to select the required option and press OK to view available settings. The video mode menu is not available whilst a recording is in progress.
VIDEO MODE SETTINGS (CONTD.) 4. Loop Recording This feature enables continuous recording of your whole journey to be made, but the recording is broken down in to manageable bite sized chunks. In the event of an incident you will always have the latest video footage, for play back later and in a manageable file size.
PHOTO MODE The key below explains the various information displayed on the screen when your iN-CAR CAM is in Photo mode, some icons will only be displayed once the relevant function has been selected within the Photo menu, as described further down this page. 1 7 2 3 01410 SD 12M 6 5 4 1. Photo Mode Icon: Indicates the iN-CAR CAM is in Photo mode. 2. Image Count: Displays number of images that can be stored on the memory card based on current resolution setting. 3.
PHOTO MODE SETTINGS To access the Photo Mode settings press the MENU (M) button, use the up and down buttons to select the required option and press OK to view available settings. To change a setting, select the chosen option using the up and down buttons and press the OK button to confirm. 1. Resolution Select the image resolution, this will increase or decrease the quality and file size of the image. Options: 4032 x 3024 or 2560 x 1920 Default Setting: 4032 x 3024 2.
PLAYBACK MODE - VIDEO FILES The key below explains the information displayed on the iN-CAR CAM screen, when a video is viewed within Playback Mode. 1 2 3 00:00:00 00:02:12 8 SD HD 100-0001 7 1. 2. 3. 4. 5. 6. 7. 8. 6 5 4 Video Icon: Indicates the iN-CAR CAM is viewing a video file. Recording Time: Displays the duration of the recorded file. Memory Card Icon: Shown on screen when a memory card is present.
PLAYBACK MODE - PHOTO FILES The key below explains the information displayed on the iN-CAR CAM screen, when a photo is viewed within Playback Mode. 1 2 SD 5 12M 100-0001 3 4 1. Photo Icon: Indicates the iN-CAR CAM is viewing a photo file. 2. Memory Card Icon: Shown on screen when a memory card is present. 3. Power Source Indicator: Displays whether the iN-CAR CAM is powered via the car adaptor (as illustrated above) or the internal battery. 4. File Number: Displays the current file number. 5.
SETUP MENU There is a Setup menu for the general settings, press the MENU (M) button twice on the rear of the device to access the menu. The options and settings available are described below. To change a setting, select the chosen option using the up and down buttons and press the OK button to confirm. 1. Language Set the language on the iN-CAR CAM as required. Options: English, Deutsch, Français, Español, Nederlands, Norsk, Suomi ou Svenska Default Setting: English 2.
SETUP MENU (CONTD.) 6. G Sensor Adjust the sensitivity of the G Sensor, it is the G Sensor that detects forces which will automatically protect the current recording in event of a collision. Settings: Off, Low, Medium or High Default: Medium 7. TV Frequency Set the audio / video frequency output format for your television set. Settings: 50Hz or 60Hz Default: 50Hz 8. TV Mode Set the audio / video output format for your television set. Settings: PAL or NTSC Default: PAL 9.
COMPUTER CONNECTION Connecting the iN-CAR CAM to a computer using the supplied USB Cable will power on the iN-CAR CAM, displaying the two available options: Mass Storage / Power On Use the up and down buttons to select the required function and press OK to confirm selection. Mass Storage If Mass Storage is selected, the iN-CAR CAM screen will show the words ‘Mass Storage’ and take the function of a card reader for your computer. Upon your computer an extra drive will appear (e.g.
TROUBLE SHOOTING PROBLEM SOLUTION The mount will not stay in place upon my windscreen. Make sure the protective plastic film has been removed from the sucker. Affix to the glass firmly and then rotate the dial clockwise, until the latch is felt to engage. Make sure that the glass is smooth and clean. Do not stick to glass that has any non-smooth effect or paint whatsoever. The iN-CAR CAM will not power up when the car adaptor is connected. Check power is available to the car adaptor.
TROUBLE SHOOTING (CONTD) PROBLEM SOLUTION The AV Out from my iN-CAR CAM just buzzes on my TV. Ensure that the AV cable is correct. Use a stereo 2.5mm jack plug where the tip is the video and the ring is the audio signal. I get the message “SD Card Error” on screen. The SD card has become unuseable by the iN-CAR CAM. Remove useful files using your PC and then perform a “FORMAT” upon the SD card from within the SETUP menu. I get the message “Memory Error” on screen.
NOTES 25
NOTES 26
www.nextbase.co.
