User Manual

Table Of Contents

QUICK START

NOTE: If a condenser microphone is used, please turn on the switch of ( )+48V phantom power supply.

Adjust the volume, tone,

and effects of each channel.

Adjust the volume and tone

of the stereo channel (CH3/CH4)

Signal output to the amplifier

or active speakers

Connect a microphone

or instrument.

MIXER BASICS: SIGNAL FLOW

1. Make sure that all the equipments connected to the M1

are turned off.

2. Connect the attached type-C data line.

A. Align the type-C data cable plug with the device

back panel interface and insert it.

B. Then connect the type-C data cable to the USB

power adapter.

C. Plug the power adapter into the standard

power socket [~AC 100V-240V 50Hz/60Hz].

USB POWER

[TYPE-C]

Power connection input

Rear Panel

MIXER BASICS: POWER CONNECTION