Car Stereo System User Manual

11
CD Operation(Cont)
Insert/Eject CD
Insert a disc into CD slot with label
side up. The disc will be automati-
cally loaded into the unit, even when
it is off or at radio mode. The word
“LOAD” will blink on the display and
the CD will play automatically. Press
the EJECT Button to eject the disc
from the slot. If the disc is not removed
from the slot within 5 seconds, it will
automatically be loaded into the slot
again. When the disc is ejected and
removed, the unit will automatically
switch to radio mode.
Multi-Session CD Reading
This unit can read multi-session CDs.
The multi-session reading will be
activated automatically if the player
detects a file that is written in multi-
session format. Press and hold the
SEL Button until "DSP OFF" is shown
on the LCD, then press the SEL Button
to cycle through the menu selections
until "MULT OFF" is shown. Use the
VOL +/ - Button to choose "MULT
ON" or "MULT OFF". The default is
MULT OFF .
Selecting Tracks
On the Head Unit, press the SEEK
>>| Button to advance CD to the next
track. Track numbers will be shown
on the display. Press and hold SEEK
>>| to fast forward.
Press the SEEK |<< Button to go
to a previous track. Track numbers
will be shown on the display. Press
and hold the SEEK |<< Button to fast
reverse. Disc will play normally when
the SEEK >>| or SEEK |<< Button is
released. On the Remote Control, use
the |<< or >>| Buttons.
Play/ Pause CD
On the Remote or Head Unit, press
the No.1 Button to pause the CD.
Press this button again to resume
playback.
Scanning Tracks
On the Remote or Head Unit, press
the No.2/INT Button to play the first
10 seconds of each track. Press this
button again to resume playback.
Repeat
On the Remote or Head Unit, press
the No.3/RPT Button to repeat the
same track continuously. “RPT ON"
will appear on the display. Press this
button again to stop repeating.
Random
On the Remote or Head Unit, press
the No.4/RDM Button to play all the
tracks in random order. “RDM ON” will
appear on the display. Press this but-
ton again to stop random play.
MP3/WMA Operation
Insert/Eject CD
Insert a disc with MP3/WMA into the
CD slot with label side up. The disc
will be automatically loaded into the
unit, even when it is off or in radio
mode. The word “MP3 DISC” will
be displayed as the CD is loaded.
The first file in the root folder will be
played. As the file is playing "ROOT"
will be displayed first, then the if there
is any ID3 information that will be dis-
played as the file is playing. Press the
EJECT Button to eject the disc from
the slot. If the disc is not removed
from the slot within 5 seconds, it will
automatically be loaded into the slot
again. When the disc is ejected and
removed, the unit will automatically
switch to radio mode.
Multi-Session CD Reading
This unit can read multi-session CDs.
The multi-session reading will be
activated automatically if the player
detects a file that is written in multi-
session format. Press and hold the
SEL Button until "DSP OFF" is shown
on the LCD, then press the SEL Button
to cycle through the menu selections
until "MULT OFF" is shown. Use the
VOL +/ - Button to choose "MULT
ON" or "MULT OFF". The default is
MULT OFF.