MA201 | Digital MP3 Player Instruction Manual
Table of Contents 1. Introduction...........................................................................................................1 2. Safety instructions.................................................................................................1 3. Function overview.................................................................................................2 4. Product description...............................................................................................3 5.
1. Introduction Choose the suitable volume. Do not turn up the volume of the earphones too high while using it. If you get ringing in your ears stop using the device or turn the volume down. Thank you for purchasing our MP3 player. Before using the unit please read this manual carefully to obtain the best possible performance from your player. Keep this manual for future reference Do not disassemble the device yourself and do not wipe the surface of device with alcohol and benzene and thinners. 2.
3. Function overview Multiple EQ modes Switch EQ in seven types: normal, rock, pop, classic, soft, jazz, bass Portable USB storage device with huge memory You can upload/download files in shortcut way in WINDOWS EXPLORER without other programs (WINDOUWS 98 above). Multiple play modes Switch play modes in seven types: normal play, repeat one, single folder play, repeat folder play, repeat all, random, intro OLED display, multi-screen saver pictures Supports various audio formats Supports MP1.2.
4. Product Description 5.
. Basic operation Adjusting the volume In music mode, voice playback mode and FM mode, pressing [VOL] button briefly will enter volume adjustment interface. Power on/off The player supports auto and manual power on function Pressing [>>I] button or [I<<] button will increase/decrease the volume one step. Manual power on: press and hold [>II] button for 3 seconds, the player will go to working mode when the player is turned on.
If the battery power is low, the screen will display “low power” and the player will automatically power off. power caused by wrong operation of buttons. Recharge your battery by connection to PC via USBA cable or by the provided charger. 7. System menu System menu enter menu: press[MODE] button briefly. select menu: press[I<<] button or [>>I] button to select the setting. save setting: hold [MODE]button to save and escape from menu. The screen displays battery icon and impulse when recharging battery.
Radio mode: listen to radio for more details, refer to “FM radio” The text reads originally:Can see the document that you love to see (for example:Novel) The telephone is thin: Can at any time see your friend of personal name card Press [VOL] button briefly and the digit of year will be blinking; Press [VOL] button briefly and the digit of month will be blinking.
Language In [language] interface, use [I<<] button or [>>I] button to select language, then press [MODE] button confirm. If 0 is selected, the high lightness is set to off. Adjust backlight and use [MODE] button to confirm. Notice: without pressing any button, OLED screen displays low lightness when setting time is up (the time unit is second). Power off setting Operation refers to “backlight” setting. Backlight The user could set OLED lightness duration to save OLED and power.
8. Playing music Press [I<<] button or [>>I] button briefly to select option, then press [MODE] button briefly to confirm the selected option. Play/Stop Play: In music mode, connect the earphone to the player and select songs, then press PLAY/STOP [>II] button briefly. Online mode Refer to other mode setting. Some operating systems Windows 98/98SEP4 cannot support USB disk with two disks icons display in MY COMPUTER.
How to add DRM music 3). Run "WMP10"(Windows Media Player 10), the "MTP" device will be discover Select "Sync",and then open the local folder where your music files saved. 1). Connect player to PC, after 10 seconds a dialog will be appear, select "Take no action" or click "Cancel" button to continue. 2). Open "My Computer", clean up the device as the following steps: 4).
How to play Browser "My Computer", you can see the files already downloaded to player. At first, you must enter into System setup and setup the "DRM Time", set it to current time, otherwise the DRM music can't play accurately. After setup "DRM Time", you can go back to music mode to play and listen to music. 6). Disconnect the player, it will make ID3 Playlist automatic, this will cost about 8 seconds. Music play menu In music play mode, pressing [MODE] button will enter music play menu.
• • Replay gap Exit Folder Play the selected folder once Equalizer mode In music play menu, the user could enter [equalizer] interface. Use [I<<] button and [>>I] button to select EQ. Repeat Folder Repeat all songs Repeat All Repeat all songs Repeat mode In music play menu, the user could enter [repeat] interface. Use [I<<] button and [>>I] button to select repeat mode.
Tempo rate In music play menu, the user could enter [tempo rate] interface. Use [I<<] button and [>>I] button to select tempo rate. When “A” in the icon blinks, press [>>I] button briefly to confirm beginning. Then “B” in the icon blinks, press [>>I] button briefly to confirm ending. Replay icon will not blink at this time. The player will replay from A to B. exist from replay mode after finishing the set replay time.
c. Time is up and the player resumes playing. When icon is turned to , press [>>I] button briefly to enter contrast function. In the above three modes, press [MODE] button briefly to exit from replay mode. Replay time In music play menu, enter [replay time] by using [I<<] button or [>>I] button to select replay time. Then press [MODE] button to confirm. User sets number of replay time from A to B by this way. Notice: In this mode, press button to return to A—B replay. 3.
music format’s name is “song.mp3” and LRC file’s name must be “song.lrc”, they are also in the same folder. 9. telephone book First time, the user can find the file ‘Setup_enu_v1.1.exe’ in drive disc CD. Then install this software on the PC as following steps Connect the mp3 with the PC, pressing the start menu to find the Flary Address software: Select the file menu to choose the new, and then you will find the file ‘C:\Program Files\Flary\TelAddbk.
Select the file menu to choose the Input Data to find the file (TelAddbk.dat) in your mp3, and then press the open button. Fill in team name in the blank and press the Append Grouping button: Enter the main menu to select Telephone mode and you will find you added Tel information. 10.
3.The player support 99 record files in one folder. Fine recoding, WAV format, good voice quality, Long recording, ACT format, fair quality and longer recording time 4.Record files are saved in the current folder in “record stop submenu/local folder” 5.When the memory is used up, the screen will show “over flow”. Please delete some files to release memory. Fine VOR, WAV format, good voice quality, will pause recording automatically when there is no sound detected 6.
Play record files Enter voice mode in system menu for more details, please refer to “playing music” in music mode. But this mode has no following reading and contrast functions. Press [>II] button briefly to begin playback 12. USB disk function Press [>II] button briefly to pause playback USB display mode The player can be a large mobile storage device. For Windows 2000, Mac OS 10.3 or Linux Redhat 8.0 pro, no driver is required. For Windows 98, driver is required.
1. Connect the player to PC and run attached procedure: MP3 PLAYER DISK TOOL. 2. Choose [partition and encrypt] option and decide available size of each disk. Set username and password, put username in [new user] and new password in [new password], then confirm them. After clicking [start] button, dividing disk begins. Click [OK] to reboot computer. Encrypt disk function User can use the attached tool to set partitions for USB disk. One is normal disk, other is encrypted disk.
two disk icons (SP4 installation is a must). Click the encrypted disk and three files is in the encrypted disk. Two are hidden files and one is executive file. Disk capacity is only 300K. It is necessary for access encrypted disk to input username and password when connecting to computer. Setting partitions will erase data, please backup data. Combination disks would also erase data. Please do not lose username and password. Otherwise, you cannot access encrypted disk.
2. Select ACT files that is converted and click [open] (Enter directly USB mode via USB cable and upgrade as the following steps) 2. Run upgrade tool [MP3 PLAYER UPDATE] then click [choose new version firmware] button. 3. Click [convert] button and begin to convert to WAV format 3. Select the new firmware driver (in the installation CD). Click [start] button to begin upgrading. Notice: Besides this function, the tool can play WAV and MP3 formats.
An improper upgrading may cause the player to work abnormally! Please read carefully manual before operation. Suggest that when formatting, make sure to select “FAT file system”, otherwise, the player would display “disk error”. 5. Connect the player to PC via USB cable and find the icon of removable disk in [my computer]. Click the right button of mouse to select [format]. In formatting interface, select FAT system in [file system], then click [star] button to format disk.
13. Troubleshooting If the player couldn’t play normally, please use trouble shooting guide to help you. Symptom The player cannot be turned on Please check the battery capacity. Please check if the device’s procedure is damaged. The player crashes Press RESET button to start the player. The player cannot work Please check the battery capacity. Please check if HOLD mode is set. Please check volume is set to “0” and make sure that earphones are connected properly and clean.
14. Specifications Item Specification Product number MA201 Dimension 30 X 65 X 20mm(W*H*D) Weight 33g Dual color OLED screen two color OLED display Operating language Simplified Chinese, English, traditional Chinese, Japanese, French, German, Italian, Dutch, Portuguese, and Spanish Transferring data rate USB2.
No part of this manual may be copied, republished, reproduced, transmitted or distributed in any way without prior written consent of Nextar, Inc. Any unauthorized distribution of this manual is expressly forbidden. Nextar is a registered tradernark of Tofasco,Inc. Nextar may find it necessary to modify, amend or otherwise or update this manual. We reserve the right to do this at any time, without any prior notice. All specifications and features are subject to change without notice.
