N7W-1BE User’s Manual Digital Photo Frame
Introduction Thank you very much for choosing our Digital Photo Frame. Before you begin to use this device, please read this manual thoroughly and keep it available for future reference. This manual will present you with the exciting features provided by our Digital Photo Frame, which allows you to enjoy unbelievably amazing visual & audio experience. With our Digital Photo Frame, you can easily and quickly view photos directly from your digital camera’s memory card.
Safety Precautions and Maintenance ★ For indoor use only. ★ To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. ★ To prevent overheating, never block any vents on the back of the digital photo frame. ★ Keep your Digital Photo Frame out of direct sunlight. Direct sunlight may cause damage. ★ Always use the buttons built in to the memory card slots to remove memory cards from the device.
To Remove and Replace the Picture Frame Color Panel: Photo 1 With both hands on the picture frame panel, place thumbs on the upper portion of the frame and index fingers at the corners. Lift the corners with the index finger. Photo 3 To change panel, simply place the panel over the frame and press down with thumbs and index fingers. Photo 2 Frame will lift off.
Preparation 1. Install the support bracket for the device. Plug the Digital Photo Frame power adaptor into a working electrical outlet. 2. Turn on the main power using the switch on the back of the Digital Photo Frame. Then press the「POWER」 button on the remote control or on the top of the Digital Photo Frame.
Key Features and Remote Control Key Functions: 1. POWER: Turn the device on/off. 2. ENTER: Press this button once to play the selected file. Press the button again and the display will return to the Root Menu. 3. PHOTO: Press this button to select the「PHOTO」 Mode available on the main menu. 4. MOVIE: Press this button to enter the 「VIDEO」Mode. 5. MUSIC: Press this button to enter the 「MUSIC」Mode. 6. A/V OUT: AV output Interface to connect to a 2-channel audio amplifier or a TV set. 7.
Remote Control MOVIE: Press this button to enter 「VIDEO」Mode. REPEAT: Press this button to activate all modes of the Repeat feature (chapter repeat, title repeat, folder repeat, etc.) 16:9/4:3: Press this button to choose the TFT LCD aspect ratios between 4:3 and 16:9. ROTATE: Press this button to adjust the viewing angle of the pictures. ZOOM: Press this button to enlarge the picture in increments of 2, 3, 4, 1/2, 1/3, 1/4, OFF.
ENTER: Press “ENTER” for the settings menu. EXIT: Press ”EXIT” to return to the previous menu. VOLUME +/-: Press ”VOLUME +/-” to adjust the player’s volume. : Press this button once to freeze the playback picture. : Press this button once to halt playback (pre-stop). Press the button again to terminate playback function and return to the main menu. : Press “ ” to return to the previous title/chapter/track/picture. : Press “ ” to skip ahead to the next title/chapter/track/picture.
Main Menu The screen will display as follows if the memory card has been correctly inserted. Make sure you have stored a song, photo, or video file on your memory card. PHOTO MUSIC VIDEO SETUP CLOCK Enter the Photo display mode directly Enter the music play mode directly Enter the video play mode directly Enter the setup mode directly Enter the clock mode directly Viewing your Pictures 1. Press the buttons either on the remote control or on the screen to operate the Digital Photo Frame. 2.
How to Play MP3 Files Please ensure that there are MP3 music files on your memory card (please read the Q&A section for more information). Note: While pictures are being displayed, press the BACK MUSIC button once to hear the MP3 files as background music. 1. Press the Right and Left arrow Keys on the remote control to select “Music” and then press the ENTER or MUSIC button on the remote control. 2. Press the directional keys to select the music file you want.
2. Press the arrow keys to select the video file you want to play, then press the ENTER button to confirm your selection. 3. Press the VOL+ or VOL- keys to adjust the volume. 4. Press the FWD and REV keys on the remote control to fast forward or fast reverse the track. 5. Press the Up arrow key or Down arrow key or PREV/NEXT key to select the previous or next video file, respectively.
Right and Left arrow keys to modify settings, and then press ENTER to confirm the settings. Operation: OSD LANGUAGE: OSD language settings. DEFAULT: Restores your Digital Photo Frame back to the factory default settings. S/W VERSION: Shows the current version of the software. PHOTO SETUP: EFFECT: Allows you to activate or deactivate the photo display effects. Press the Right or Left arrow keys and the ENTER button to turn OFF or ON (16 effects in total).
JPEG INFO： Allows you to adjust the JPEG photo ON/OFF settings. Press the Right or Left arrow keys and the ENTER button to turn ON or OFF. PLAY MODE：Allows you to adjust the order the photos will be displayed in. Press the Right or Left arrow keys and the ENTER button to switch the mode between NORMAL or RANDOM mode. VIDEO SETUP Operation: Press the Up and Down arrow keys to select functions. Press the Right and Left arrow keys to adjust the settings. Press the ENTER button to confirm your settings.
CLOCK SETUP Function: DATE SETUP: Press arrow keys and ENTER button to setup the date. TIME SETUP：Press arrow keys and ENTER button to setup the time of clock. ALARM SETUP： Press arrow keys and ENTER button to setup the time of alarm. POWER ON： Press arrow keys and ENTER button to setup the time of power on. POWER OFF： Press arrow keys and ENTER button to setup the time of power off. How to Setup the Clock Setup the local time and calendar Press the Up and Down arrow keys to select functions.
Question Answer The Digital Photo Frame is compatible with Photo: JPEG photo, music, and video files in which formats? Music: MP3 Video: MPEG-1 and AVI*. What kinds of memory cards are compatible with Secure Digital Card (SD), Multimedia Card the Digital Frame? (MMC), SmartMedia Card, Memory Stick. How can I get MP3 music files? Use your personal computer and audio editing software to covert your music to MP3 format. Transfer the MP3 file to the memory card by using a Memory Card Reader.
Specifications Display: 7” TFT LCD 480 X 234 (RGB) I/O: A/V Out Interface Speakers (stereo) Power: AC Adapter; Input 100-240V; Output 12V 1-1.
