Notification Manual

Reset Menu

Note: These screens are only available with the notification units.

Clear Intruder Detection

If an invalid password is entered more than 10 times in 15

minutes, the system will automatically prevent access to

the NexPump web interface for 15 minutes. If you want to

access the web interface before that you can clear the

intruder detection through this menu item.

(Displays only if intruder is detected)

Factory Reset ETH Module

Resets ANi module to factory defaults. All configuration

will be lost.

Reset ETH Configuration

Select 'Y' to Reset IP configuration to defaults.

Defaults: Address-'192.168.1.105', Mask-'255.255.255.0'

Gateway-'192.168.1.51', DNS-'192.168.1.51', DHCP-'On',

HTTP Port-'80', Clears All Email and WIFI (If Installed)

Information

Reset Web Username and Password

Resets the username and password to defaults.

Defaults: Username-'NPAdmin', Password- Serial #.

Restart ANiMod

Restarts ANi module if needed.

Restart ANiMod ? Y N

Reset Web Password?

Confirm ? Y N

Reset ETH Config?

Reset Info ? Y N

Factory Reset ANiMod

Confirm ? Y N

Clear Intruder ? Y N