Product Manual

20
Reset Menu
Note: If you have a notification unit please see the Notification Guide for additional screens.
The reset menu allows you to change or reset the time, date, timers,
etc.
To select the reset menu use the up, down arrows until you see reset
menu on the third display line, then press ENTER.
This will allow you to set the current time on the system. If you want
to set the time select the ‘Y’ and use the up, down arrows to adjust
the time.
Note: the up, down arrows will adjust the time and the left, right
arrows will move the cursor.
This will allow you to set the current date on the system. If you want
to set the date select the ‘Y’ and use the up, down arrows to adjust
the time.
Note: the up, down arrows will adjust the time and the left, right
arrows will move the cursor.
To change the self-test time of the system use the left and right
arrows to adjust the time. When on desired time press ENTER to set.
The system self-tests every twelve hours so this will be the time for
AM and PM.
Batteries have a lifespan and should be replaced when the NexPump
reports this time frame has expired. This should also be reset when
replacing batteries. Defaults for battery type selected. (WET = 1300
days, 3.5 years, AGM = 1600 Days, 4.5 Years)
To select use the left and right arrows and press ENTER when cursor
is over desired position.
Set Time ? Y N
Time=12:12 AM/PM
Set Date ? Y N
Date=01-01-18
Reset Self-Test Time
Hour ? 12 AM/PM
Reset Battery Timer?
Confirm ? Y N
Reset Menu?