Product Manual

17
If the alarm is disabled you can enable it by selecting the menu
enable alarm.
To enable the alarm use the up, down arrows to find the menu enable
alarm. To select press ENTER.
Configuration Menu
Note: If you have a notification unit please see the Notification Guide for additional screens.
The configuration menu allows unit specific information to be input
into the system. Battery, amps, charger, etc.
To select the configuration menu use the up, down arrows until you
see configuration menu on the third display line then press ENTER.
Select the battery type currently on your system. Press ENTER when
cursor is over desired position.
Select the battery amp hours on your battery. If multiple batteries are
connected add the total amp hours together. Use the right and left
arrows to increase or decrease amp hours. When on desired number
press ENTER.
Charger will turn on the battery charger if selected. It is
recommended to turn on the charger when system is first installed or
when replacing batteries. Press ENTER when cursor is over desired
position.
Battery Type ? W A
W=Wet A=AGM,Gel
Battery Amps ? 105AH
Charger ? On Off
Configuration Menu?
Enable Alarm?