Data Sheet

Nexperia
74HC165; 74HCT165
8-bit parallel-in/serial out shift register
74HC_HCT165 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 5 — 21 August 2017
5 / 22
CE
CP
DS
PL
D0
D1
D2
D3
D4
D5
D6
D7
Q7
Q7
mna993
inhibit serial shift
load
Figure 6. Timing diagram
8 Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V)
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage -0.5 +7 V
I
IK
input clamping current V
I
< -0.5 V or V
I
> V
CC
+ 0.5 V
[1]
- ±20 mA
I
OK
output clamping current V
O
< -0.5 V or V
O
> V
CC
+ 0.5 V
[1]
- ±20 mA
I
O
output current -0.5 V < V
O
< V
CC
+ 0.5 V - ±25 mA
I
CC
supply current - 50 mA
I
GND
ground current -50 - mA
T
stg
storage temperature -65 +150 °C
P
tot
total power dissipation T
amb
= -40 °C to +125 °C
[2]
- 500 mW
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For SO16 Packages: P
tot
derates linearly with 8 mW/K above 70 °C.
For (T)SSOP16 Packages: P
tot
derates linearly with 5.5 mW/K above 60 °C.
For DHVQFN16 Packages: P
tot
derates linearly with 4.5 mW/K above 60 °C.