Application Guide

DATA STORAGE AND UPLOAD FOR PRINTING
2.1 Preparation for uploading data:
a. Windows PC (WIN XP, 7, 8, 10/ 32/64 bit)
b. Mini-USB cable (package accessories)
c. NX501 OBD2 scanner
d. Download and install the program on windows computer from official website
http://nexpeaktech.com/service/Download-Center.html
2.2 Uploading data procedures
2.2.1 Download and Install the uploading program
Same procedures as chapter 1.2.1 Download and Install the updating program
2.2.2 Connect the scanner to computer
- Directly connect the scanner to computer’s USB port with mini-usb cable, device will be powered
up normally.
2.2.3 Upload the stored data to computer
- Run the UPLINK program and click the “Print” column. Make sure you have message at bottom
left corner “device connected to COM X”
- Navigate the buttons to select “Print Data” from scanner’s main interface. Select “Print ALL” or
“Print DTC” or the data that you want.
- After a “beep” you will see the selected data are uploaded to your computer, you may choose
“Print” to print all data directly with printer connect with computer
“Clear” to clear all the data on UPLINK program
“Copy” to copy the select data and that you may paste the data where you need
“Edit” to allow you to edit the uploaded data in a WordPad, to add or delete some info before
printing out.