Quick Start Guide

P a g e | 8
3) Starlight bracket should be positioned approximately middle point between the two handle openings of
the Keg.
4) Bracket should be welded on at least 2 weld joints (total 4) using spot welding process on each side of
the bracket or at least 1 plug weld joint (total 2) on each side of the bracket. The exact points used to
carry out the welding are up to the welding professional service provider and the type of Keg being used.
The Starlight device is cross-compatible across different Keg types being 9G, 1/6 Barrel, 20L, 30L & 50L
Kegs and Casks.
The designated/suggested spot weld points are marked in red and blue in the image below. The
designated/suggested plug weld points are marked with holes on the bracket.