Quick Start Guide

P a g e | 6
2.0 Operation
2.1 QuickStart Guide
2.1.1 Activation
NOTE: The new device can be installed only on the Keg which has correctly welded special bracket. If a bracket is not
correctly installed the device will not function as intended. The device can be damaged when incorrectly installed. Please
view bracket installation guide for details.
READ INSTRUCTIONS: If you are a person who will spot weld the bracket on the Keg, please read the bracket instruction
instructions provided in the user manual
New devices supplied from the factory are in ‘factory suspended mode’. Before installing the device on a Keg,
it needs to be awakened (turned on).
To awaken a device, it needs to be put through a specific motion: Device needs to be slowly rotated at a
speed of at least once per 3 seconds for at least 30 seconds along its X-axis. (i.e. 10 full rotations in 30 seconds)
Once awakened, the LED on the device will start flashing Green for 60 seconds to confirm the device has
been awakened.
**Through use of a special production activation jig multiple devices can be awakened from factory sleep
simultaneously.