Quick Start Guide

P a g e | 3
1.0 Introduction
Before use, please read this manual carefully and keep it for later reference.
• Do not disassemble the product and do not try to carry out repairs on this product. The product is
not repairable.
• Do not attempt to replace the batteries and do not dispose of the device and batteries in fire or in a
hot oven.
• Do not crush or crumple the device.
• Any use that does not conform to this manual will void the warranty and manufacturer's liability.
• Only parts manufactured by Sourceman International and its subsidiaries are deemed to be genuine.
• Do not leave any electronic equipment or parts or any other objects directly on top of the NexoTrack
Unit.
• Do not submerge the product in liquids.
Nexotrack Starlight device is an LPWAN enabled environmental monitoring and WiFi geolocation tracking
device used for tracking of stainless-steel Keg assets throughout the Keg’s lifecycle.
This user manual provides a detailed breakdown of all features and functions of the Starlight unit and is
intended to be used by professional personnel with training in the respective fields of operation. This product
and its manual are not intended for general public consumption.
To achieve desired operational state the Starlight unit needs to be mounted onto the steel Kegs using a
specially designed custom stainless-steel bracket which is spot welded on to Keg’s internal surface of the
Keg’s top chime using approved bracket installation method and jigs.
The device monitors and reports temperature, WiFi AP MAC address data as well as Keg life cycle event state
by utilising a proprietary motion engine algorithm.
The frequency of reporting and sensitivity of the device to various physical states can be configured through
8 fully customisable user configuration profiles which are loaded onto the device using WiFi over-the-air
(OTA) feature and selected via Sigfox downlink functionality also OTA.
Starlight LPWAN communication protocol uses Sigfox’s global network. The device is a multizone device and
provides seamless roaming access across different geographical territories and Radio Communication Zones
(RCZ). Active/desired RCZ can be selected remotely using Sigfox downlink functionality or via Nexotech’s
proprietary WiFi Monarch feature.
Bluetooth Low Energy (BLE) beacon functionality is enabled on all devices reporting device battery voltage
and temperature using Eddystone standard.
In addition to the above Starlight is also equipped with a UHF RFID tag for passive scanning.
The Wifi module is the only independent device on board. When not in use, the power to the module is
switched off so there is no possibility of uncontrolled or unwanted transmissions. The power to Sigfox
transceiver is turned off when Sigofox is not being used, so there is no chance of any Sigfox or BLE
transmission when MCU communicated directly with the WiFi Module.
Onboard logging provides the capability for detailed historical logging of events for up to 90 days.