User's Guide

Smart 1080P Wi-Fi Camera Pan/Tilt/Zoom/360

Product Description

Camera

Wall Bracket

Power Adapter

×1

1.List of Items

2.Exterior

Indicate Light

Light Sensor

Lens

Microphone

Micro USB

Rubber Mat

TF Card Slot

Mount Screw Nut

Reset

User’s Guide

1.Download APP and Account Registration

iPhone User(iOS system version≥9.2): Search :NexHT Cam from APP Store.

Android User(Andr system version≥5.0): Search NexHT Cam from Play Store.

(if verification email not received，check the spam folder )

3. Plug In and Reset Camera

The camera will exam itself after being plugged in , after the examination is

complete in about 20 seconds, the camera will play “di~di” sound and the

indicator light will flash red slowly（once every 2 seconds）, which means

the camera is ready to be added.

Smart Mode: When “di~di” sound is heard after briefly press the button

(along with indicator light flashes red slowly, once every two seconds), the

camera is now in Smart Mode (the default mode)；

AP Mode: When “du~” sound is heard after briefly press the button (along

with indicator light flashes red rapidly, twice per second), the camera is now

4. Add Camera

Open APP and go to My Device page, tap on “+” and select the device type as Camera. Then, scan the QR code on

your device so that the APP can automatically select the appropriate Network Mode based on the QR code (Note:

when the QR code cannot be identified, please tap on “No QR Code” and manually select either AP Mode or Smart

Mode to configure the camera).

Power Cable

Screw Fitting

Quick Start Guide

PAGE 1
Product Description 3. Plug In and Reset Camera 1.List of Items Camera ×1 Power Cable ×1 Wall Bracket ×1 Screw Fitting ×1 Power Adapter ×1 Quick Start Guide ×1 Smart Mode: When “di~di” sound is heard after briefly press the button (along with indicator light flashes red slowly, once every two seconds), the camera is now in Smart Mode (the default mode)； 2.Exterior Indicate Light Light Sensor Rubber Mat Lens TF Card Slot Mount Screw Nut Microphone Reset Micro USB User’s Guide 1.
PAGE 2
For reference, when APP chooses Smart Mode after scanning the QR code: After scanning QR code, the APP automatically enters the Smart Mode, then the device needs also to be reset to Smart Mode (press the reset button to switch to Smart Mode, which the camera makes “di~di” sound and the indicator light flashes red slowly). After successfully adding the camera, camera name can be either customized or chosen from the recommended list. Then, a 360 degrees navigation picture can be created by the camera.