User Manual

The IC Card Slot is on the right side of the main unit. To
insert a card, hold the opposite side of the IC chip with
chip facing up, insert the IC card into the slot. During the
transaction process, the IC card should remain in the slot
as shown in the pic below.
Note: If the contact point of the IC chip is damaged or
oxidized, the transaction may fail.
While tapping a card, hold the IC card, get close to the top
of the printer cover, hold for around 1 second till you hear
a "beep" sound which means a successfully completed
transaction. At this time, the card can be removed.