Power on: Press “ terminal. ”, key for 2-3 seconds to power on Power off: Press “ ” key until it shows menu “power off; restart”, select “power off” to enter menu your POS terminal will turn off, “cancel” “ok”, press ok to confirm. Swipe card in magstripe card slot as demonstrated below in steady motion, and make sure the magstripe faces the device. Note: Any damage to the magstripe or incorrect swiping may lead to transaction failures.
The IC Card Slot is on the right side of the main unit. To insert a card, hold the opposite side of the IC chip with chip facing up, insert the IC card into the slot. During the transaction process, the IC card should remain in the slot as shown in the pic below. Note: If the contact point of the IC chip is damaged or oxidized, the transaction may fail.
Hold the printing paper by hand, tear it down towards the direction as shown in the pic. While tearing the paper, please make sure the speed and power are even and swift. 1.Remove battery cover 2.Install/disassemble battery 3.Insert/remove white socket from battery plug 4.
Remove the battery cover, insert the rechargeable lithium battery, and replace the battery cover. Connect the adapter, mobile power or PC and terminal using a USB line. Plug the adapter into a power outlet. Power on the terminal. The terminal screen will display charging progress. After the terminal is fully charged “ ” will display as shown in the pic below. Type- C powe r ba nk 1.Open the paper cabinet cover in the direction shown below. 2.
1.open the battery cover. 2.Place the SIM/PSAM/SD card in the card holder (the chip of SIM/PSAM/SDcard is oriented toward the inside of the machine). Attention: 1.Install or remove SIM/PSAM/SD card, make sure the unit is turned off to avoid damage to the card. 2.SIM/PSAM/SD card can not contain, stickers or adhesive, which may affect the thickness of card and hinder, the smooth insertion or removal of cards.
If the following solutions do not solve an existing error, please contact Customer Service.
Please follow the instruction strictly when install and connect the terminal. The terminal can just use specified power adaptor, cannot replace by other, or will cause the terminal work improperly, even damage the terminal. Do not damage the power cable and power adaptor. It can't be used any more if the power cable or power adaptor is damaged. Please check power supply socket whether complying with terminal set voltage before insert the AC socket. Recommend to choose the fuse socket, and grounding well.
INSPECTION CERTIFICATE INSPECTOR: PLACE OF ORIGIN: Shenzhen,Guangdong SHENZHEN XINGUODU TECHNOLOGY CO.
