User's Manual

Chapter 2: Jumpers and Connectors
Jumper Settings
LVDS Power Input Voltage Select (JP9)
SW5: Input Voltage Selection
CMOS Input Voltage Select (J6)
SW6: COM Port Mode Selection
BIOS Function Select (J1)
CF (IDE0) Primary Master/Slave Select (JP4)
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
16
DC Input Voltage Select (JP1)
VTC 6110 User Manual
SW6 COM Port Mode RS232
(default)
RS485
SW6.1 OFF ON
SW6.2 OFF ON
SW6.3 OFF ON
SW5 / Input
Voltage
12V (default) 24V 6V~36V
SW5.1 OFF OFF ON
SW5.2 OFF ON Ignore
Pin Status Function Description
1-2 Short Disable carrier board BIOS
2-3 (default) Short (default) Disable module board BIOS
Pin Status Function Description
1-2 Short Slave
2-3 (default) Short (default) Master
Pin Status Function Description
1-2 Short +5V IN
2-3 (default) Short (default) +3.3V IN
Pin Status Function Description
1-2 (default) Short (default) VBAT IN
2-3 Short Clear CMOS
Pin Status Function Description
1-2 (default) Short (default) IGNITION
2-3 Short VIN_M