User's Manual

Installation
The installation of RF module is very easy. Just follow the steps below and you can
complete the installation:
Insert the radio module into mini PCIe slot in the PCBA.
Screw up to fasten the module tightly inside PCBA.
Note: The mini PCIe pin definition is different from standard mini PCIe module in
other Wi-Fi application. The embedded PCBA should follow the mini PCIe pin
definition to design the pin assignment to connect this radio module.
Product specification
WLAN Standard IEEE 802.11b/g/n, Wi-Fi compliant
Frequency Range 2.400 GHz ~ 2.497 GHz (2.4 GHz ISM Band)
Number of Channels 2.4GHz：Ch1 ~ Ch14
Modulation 802.11b : CCK,DQPSK, DBPSK
802.11 g/n : OFDM /64-QAM,16-QAM, QPSK, BPSK
Output Power 802.11b /11Mbps : 15dBm, typical@ EVM≦-9dB
802.11g /54Mbps: 13dBm , typical@ EVM≦-25dB
802.11n/65Mbps : 12dBm, typical@ EVM ≦-28dB
Receive Sensitivity
(11n,20MHz)
-MCS=0PER @ -85dBm, typical
-MCS=1PER @ -84dBm, typical