User's Manual

User’s Manual
Light Industrial AP ENGLISH
56
Copyright © NEXCOM, INC.
 802.11 Authentication: Select from Open System, Shared Key, or Auto.
 WEP Key Length: Select a key length from 64-bit, 128-bit, or 152-bit.
 WEP Key Format: Select a WEP key format from ASCII or Hex.
 WEP Key Index: Select a key index from 1~4. The WEP key index is a number that specifies
which WEP key will be used for the encryption of wireless frames during data transmission.
 WEP Keys: Provide the pre-defined WEP key value; the system supports up to 4 sets of WEP
keys.
 802.1X: When 802.1X Authentication is selected, RADIUS authentication and Dynamic WEP are
provided.
Security Settings: 802.1X Authentication
 Dynamic WEP Settings:
o Dynamic WEP: For 802.1X security type, Dynamic WEP is always enabled to automatically
generate WEP keys for encryption.
o WEP Key Length: Select a key length from 64-bit or 128-bit.
o Re-keying Period: The time interval for the dynamic WEP key to be updated; the time unit is in
seconds.
 RADIUS Server Settings (Primary/Secondary):
o Host: Enter the IP address or domain name of the RADIUS server.