User's Manual

User’s Manual

Light Industrial AP ENGLISH

7.2.3 VAP Configuration

This section provides configuration of each Virtual Access Point with settings such as Profile Name,

ESSID, and VLAN ID.

VAP Configuration Page

To enable specific VAP, select the VAP from the drop-down list of Profile Name. The basic settings of

each VAP are collected in the profile as follows:

 VAP: Enable or Disable this VAP.

 Profile Name: The profile name of a specific RF card and its VAP for identity / management purposes.

 ESSID: ESSID (Extended Service Set ID) serves as an identifier for clients to associate with the

specific VAP. It can be coupled with different service levels like a variety of wireless security types.

 VLAN ID: The NEXCOM Access Point supports tagged VLANs (virtual LANs). To enable VLAN

function, each VAP shall be given a unique VLAN ID with valid values ranging from 1 to 4094.

 CAPWAP Tunnel Interface: Select Checkbox to designate traffic for the VAP to pass through

CAPWAP Tunnel established between the AP and the controller.