User's Manual

User’s Manual

Light Industrial AP ENGLISH

AP General Settings Page

 RF Card Name: Select one RF card for further configuration.

 Band: Select an appropriate wireless band: 802.11a, 802.11b, 802.11g, 802.11b+802.11g,

802.11g+802.11n, 802.11a+802.11n or select Disable if the wireless function is not required.

 Pure 11n: Enable 802.11n network only.

 Short Preamble: The short preamble with a 56-bit synchronization field can improve WLAN

transmission efficiency. Select Enable to use Short Preamble or Disable to use Long Preamble with a

128-bit synchronization field.

 Short Guard Interval (available when Band is 802.11g+802.11n or 802.11a+802.11n): The guard

interval is the space between symbols (characters) being transmitted to eliminate inter-symbol

interference. In order to further boost throughput with 802.11n, short guard interval is half of what it

used to be; please select Enable to use Short Guard Interval or Disable to use normal Guard Interval.

 Channel Width (available when Band is 802.11g+802.11n or 802.11a+802.11n): Double channel

bandwidth to 40 MHz to enhance throughput.

 Channel: Select the appropriate channel from the drop-down menu to correspond with your network

settings, for example, Channel 1-11 is available in North American and Channel 1-13 in Europe, or

choose the default 6.

 Max Transmit Rate: The maximum wireless transmit rate can be selected from the drop-down menu.