User's Manual

User’s Manual
Light Industrial AP ENGLISH
45
Copyright © NEXCOM, INC.
 SNMP Configuration: By enabling the SNMP function, the administrator can obtain the system
information remotely.
SNMP Configuration Fields
 Enable/ Disable: Enable or Disable this function.
 Community String: The community string is required when accessing the Management Information
Base (MIB) of the system.
o Read: Enter the community string to access the MIB with Read privilege.
o Write: Enter the community string to access the MIB with Write privilege.
 Trap: When enabled, events on Cold Start, Interface UP & Down, and Association & Disassociation
can be reported to an assigned server.
o Enable/ Disable: Enable or Disable this function.
o Server IP Address: Enter the IP address of the assigned server that will receive the trap report.
 System Log: When this function is enabled, specify an external SYSLOG server to accept SYSLOG
messages from the system remotely.
System Log Fields
 Enable/ Disable: Enable or Disable this function.
 SYSLOG Server IP: The IP address of the Syslog server that will receive the reported events.
 Server Port: The port number of the Syslog server.
 SYSLOG Level: Select the desired level of received events from the drop-down menu.