User's Manual

User’s Manual
Light Industrial AP ENGLISH
36
Copyright © NEXCOM, INC.
Step 2: Prevent Loops when Connecting Multiple APs
When many APs are linked in this manner, undesired loops may form to lower overall WLAN
performance. To prevent such occurrence, please make sure Layer 2 STP is enabled.
To turn on this feature, please click on the System icon and the Network Interface tab.
Network Settings Page
Please select Enable in the field labeled Layer2 STP. This will prevent data from looping or creating a
broadcast storm. Click SAVE when completed, and then Reboot to allow updated settings to take effect.
Step 3: Building the WDS Link
To extend the wireless coverage, each RF card supports up to 4 WDS links for connecting wirelessly
to other WDS-capable APs (peer APs). By default, all WDS profiles are disabled.