Instructions / Assembly

2
Boston Outdoor Coffee Table Assembly Instructions / v20220504US
Important Note
Please Read Carefully All Sections Before You Start
1. Parts
Before assembling, please check the packing parts carefully according to the sections
on page 2 and page 3 , "Tools" , "Screws" and "Components" of this Assembly Instruction
sheet. If parts are missing, please contact the retailer from which you acquired this coffee
table to get the missing parts.
2. Safety
2.1 It is recommended to wear appropriate safety equipment to avoid any risk of injuries
but it is not limited to the following safety equipment when assembling the coffee table:
gloves, safety shoes, safety goggles, long sleeves, and pants.
2.2 We recommended assembling the coffee table by two people to avoid any risk of
injuries. DO NOT attempt assembling by one person.
2.3 The coffee table is not designed for use as a standing platform or a ladder. DO NOT
stand on the coffee table as there is a risk of falling and injury.
3. Tools
Always use the proper tools for assembly.
4. Assembling Procedure
4.1 Please follow the steps of the Assembly Instructions sheet in order.
4.2 DO NOT tighten all the screws until all the parts are in place and assembling in
alignment. Otherwise, it should cause the assembly to be misaligned. It is recommended
to turn back the screws in half-turn when the head of screws touches the parts before
tightening all the screws in order.
Tools
T1 x 1pc
Hex Key
Screws
Screw 1/4" x 4 5/16"
S1 x 8pcs S2 x 12pcs
Screw 1/4" x 1 15/16"
For the most up-to-date information, please visit our website @ www.newtechwood.com
Warranty
:
Please visit our website for full warranty @www.newtechwood.
com