Instructions / Assembly

2
Child Adirondack Chair Assembly Instructions / v20221215US
Important Note
Please Read Carefully All Sections Before You Start
1. Parts
Before assembling, please check the packing parts carefully according to the sections
on page 2 and page 3 , "Tools" , "Screw, Bolt and Nut" and "Components" of this Assembly
Instruction sheet. If parts are missing, please contact the retailer from which you acquired
this chair to get the missing parts.
2. Safety
2.1 It is recommended to wear appropriate safety equipment to avoid any risk of injuries
but it is not limited to the following safety equipment when assembling the Adirondack
Chair: gloves, safety shoes, safety goggles, long sleeves, and pants.
2.2 The Adirondack Chair is not designed for use as a standing platform or a ladder.
DO NOT stand on the chair as there is a risk of falling and injury.
3. Tools
Always use the proper tools for assembly.
4. Assembling Procedure
4.1 Please follow the steps of the Assembly Instructions sheet in order.
4.2 DO NOT tighten all the bolts and screws until all the parts are in place and
assembling in alignment. Otherwise, it should cause the assembly to be misaligned. It is
recommended to turn back the bolts in one turn and turn back the screws in half-turn
when the head of bolts and screws touches the parts before tightening all the bolts and
screws in order.
Tools
T1 x 1pc T2 x 1pc
Wrench Hex Key
Screw, Bolt and Nut
Bolt 1/4" x 1-15/16" Nut 1/4" Screw 1/4" x 2-9/16"
Screw
1/4" x 1-15/16"
S1 x 6pcs
S2 x 6pcs
S3 x 2pcs
S4 x 8pcs
For the most up to date information, please visit our website @ www.newtechwood.com
Warranty
:
Please visit our website for full warranty @www.newtechwood.
com