Use and Care Manual

36" Hybrid Composite Railing Installation Guide / v20210527US 33
9
Pre-drill and install the foot blocks (IS) with
screw (R) on the bottom rail as shown in
Diagram 31. Foot blocks should be evenly
spaced out depending on the length
of the final rail and cannot be installed
underneath a pre-drilled baluster hole.
Note: Top rail is A1 in Diagram 32. The holes
should be facing downwards. Bottom rail
is A2 in Diagram 32. The holes should be
facing upwards.
A1
A2
DIAGRAM 32
DIAGRAM 31
Screw (R)
10
Attach the top rail adapters (C) on both
ends of the top rail insert (B) as shown in
Diagram 33.
11
Slide the top rail insert (B) into the top rail
(A1) as shown in Diagram 34.
DIAGRAM 33
DIAGRAM 34
13
Attach the bottom rail (A2) onto the bottom
post brackets (G) as shown in Diagram 36.
DIAGRAM 36
12
Cut balusters (M) to the length of 27 11/16"
(703 mm) as shown in Diagram 35.
DIAGRAM 35