Use and Care Manual

36" Hybrid Composite Railing Installation Guide / v20210527US 31
4
First, mark on the post which will be on
the stair top using the "Stairs - Top Post"
cardboard template. Use the top 4 holes
for top rail bracket and use the bottom 2
holes for the bottom post brackets.
Then, pull a string down at a 32 degree
angle for locating the "Stairs - Bottom Post"
cardboard template on the stair bottom
post as shown in Diagram 21.
Note: The cardboard template location
should be measured from the boom.
Stair Railing Installation Continued
DIAGRAM 21
5
Pre-drill post bracket holes with a 1/8" (3
mm) bit as shown in Diagram 22.
Lower the post skirt (K) over the post sleeve
(N) as shown in Diagram 23.
6 1/8"
(155 mm)
36"
(914 mm)
39 15/16"
(1015 mm)
10 1/16"
(255mm)
Stair - Top Post
DIAGRAM 22 DIAGRAM 23
6
Drill in the top rail bracket (DS) with screw
(O) as shown in Diagram 24.
Drill in the bottom post brackets (G) with screw
(P) as shown in Diagram 25.
DIAGRAM 24 DIAGRAM 25
Bottom Post
Brackets (G)
with Screw (P)
Top Rail
Bracket (DS)
with Screw (O)