Use and Care Manual

36" Hybrid Composite Railing Installation Guide / v20210527US 28
Installing the Post on a Deck
DIAGRAM 15
b. Once the post (J) is in the correct position
mark the holes with a marker or pencil as
shown in Diagram 14.
c. Now take a drill and drill the holes previously
marked as shown in Diagram 15.
DIAGRAM 14
a. Following Diagram 12, 13 position the post (J).
Note: Installing directly on the board requires a
substrate underneath in order for the screws to
fully secure the board, ensure careful aention is
paid to Diagram 12, 13.
DIAGRAM 13
X ≥ 3 9/16”(90 mm)
Y ≤ 4 5/16”(110 mm)
1 1/2"(38 mm)
1 1/2"(38 mm)
L=min7 5/16"(185 mm)
DIAGRAM 12
Note: The substrate underneath has to fit in
between the range shown in Diagram 13.