Use and Care Manual

36" Hybrid Composite Railing Installation Guide / v20210527US 25
1
Mark where the post (J) will be installed.
The maximum distance of the post is
64 3/4" (1645 mm) as shown in Diagram 1.
2
Cut post (J), which will be placed on the
top, to the length of 36 7/8" (937 mm ) as
shown in Diagram 2. The post on the lower
side DO NOT need to be cut.
Cut the post sleeve (N), which will be
placed on the top, to the length of 39"
(991 mm) as shown in Diagram 3. The post
sleeve on the lower side DO NOT need to
be cut.
DIAGRAM 1
DIAGRAM 2
DIAGRAM 3
3
Install the post (J) as shown in Diagram
4-20.
Note: Screw (S) is used when installed on
concrete. Screw (T) is used when installed
on deck.