Use and Care Manual
36" Hybrid Composite Railing Installation Guide / v20210527US 20
6
Now take either the left side 45 degree
connector (V) or the right side 45 degree
connector (X) depending on what you
installed in step 4 and put it over the top
of the previously installed onto the post as
shown in Diagram 6.
7
Once the connector has covered the
bracket secured to the post take the Hex
wrench (AB) provided and secure to the
underside of the bracket with three screws
(AA) as shown in Diagram 7. This will secure
both connector and bracket together to
create the nal angled bracket.
DIAGRAM 6
DIAGRAM 7
8
Drill in the top rail bracket (D) with screw (O)
as shown in Diagram 8.
DIAGRAM 8
5
Repeat step 4 but install the bracket for the
bottom of the rail as show in Diagram 5.
DIAGRAM 5