Use and Care Manual

36" Hybrid Composite Railing Installation Guide / v20210527US 13
Straight Railing Installation Continued
4
Mark where the post brackets will be
installed with the "Straight Railing"
cardboard template as shown in Diagram
21. Use the top 6 holes for top rail bracket
and use the bottom 2 holes for the bottom
post brackets as shown in Diagram 22.
Note: The cardboard template location
should be measured from the boom.
Pre-drill post bracket holes with a 1/8"
(3 mm) bit.
5
Lower the post skirt (K) over the post sleeve
(N) as shown in Diagram 23.
Drill in the top rail bracket (D) with screw (O)
as shown in Diagram 24.
Drill in the bottom post brackets (G) with
screw (P) as shown in Diagram 25.
DIAGRAM 25DIAGRAM 23 DIAGRAM 24
DIAGRAM 21 DIAGRAM 22
6 1/8"
(155 mm)
36"
(914 mm)
Straight - Railing
Bottom Post
Brackets (G)
with Screw (P)
Top Rail
Bracket (D)
with Screw (O)