Installation Guide

36" Hybrid Composite Railing Installation Guide / v20181120 16
DIAGRAM 6
DIAGRAM 7
DIAGRAM 8
DIAGRAM 9
Installing on a wood surface / deck
surface
a. Following Diagram 9, 10, 11 position the post
with the metal base.
Note: Installing directly on the board requires a
substrate underneath in order for the screws to
fully secure the board, ensure careful aention is
paid to Diagram 9, 10, 11.
c. Insert the plastic anchors into the drilled holes
as shown in Diagram 6.
e. Now x and tighten each screw, once complete
it should look like Diagram 8.
d. Position the post with the metal base over the
predrilled holes and then insert the screws (T-
WJ0094) into the designated holes as shown in
Diagram 7.
T-WJ0094