User Manual NTSecureGateway Language Version: EN Date: 2020-10 IMPORTANT NOTE READ CAREFULLY BEFORE USE TO BE KEPT FOR FUTURE REFERENCE F905 Valid for the following hardware components: NTSecureGateway 11648_0008_0012 V2.
NTSecureGateway User Manual 11648_0008_0012_UM-User_Manual Revision: DV A1 2 / 14 Change Management Revision ID DV A1 Description of Changes Initial Revision Manufacturer NewTec GmbH Buchenweg 3 89284 Pfaffenhofen Germany NewTec GmbH · Buchenweg 3 · 89284 Pfaffenhofen a.d. Roth · Germany · Tel.: +49 7302 9611-0 · product-support@newtec.de · www.newtec.de F905 Phone.: +49 7302 9611 - 0 Internet: www.newtec.de E-Mail: info@newtec.
NTSecureGateway User Manual 11648_0008_0012_UM-User_Manual Revision: DV A1 3 / 14 Content Change Management ................................................................................................................................................................ 2 Manufacturer .................................................................................................................................................................................. 2 General Notes...............................
NTSecureGateway User Manual 11648_0008_0012_UM-User_Manual Revision: DV A1 4 / 14 Status LED.............................................................................................................................................................................12 Wi-Fi Antenna Jack............................................................................................................................................................ 12 BLE Antenna Jack .............................................
NTSecureGateway User Manual 11648_0008_0012_UM-User_Manual Revision: DV A1 5 / 14 NTSecureGateway User Manual General Notes Copyright Copyright © 2020 NewTec GmbH, Buchenweg 3, 89284 Pfaffenhofen, Germany All rights reserved. The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and/or service NewTec GmbH manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of NewTec GmbH.
NTSecureGateway User Manual 11648_0008_0012_UM-User_Manual Revision: DV A1 6 / 14 Liability To the extent permissible by applicable law, in no circumstance, including (but not limited to) negligence, shall we be liable for your reliance on any information in this document, nor shall we be liable for any direct, incidental, special, consequential, indirect or punitive damages nor any loss of profit that result from the use of, or the inability to use, this document or any material on any site linked to thi
NTSecureGateway User Manual 11648_0008_0012_UM-User_Manual Revision: DV A1 7 / 14 FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
NTSecureGateway User Manual 11648_0008_0012_UM-User_Manual Revision: DV A1 8 / 14 Intended Use This product is designed to be used in industrial applications. It is intended to be mounted in an electrical cabinet. It is intended to collect measurement data via the provided interfaces (Bluetooth Low Energy, CAN, RS485 or digital IOs) and provide this information to higher level instances like PLCs, Industry PCs, or Cloud solutions.
NTSecureGateway User Manual 11648_0008_0012_UM-User_Manual Revision: DV A1 9 / 14 Device Overview Figure 2: External Interfaces Key Features • • • • • • • Microchip ATSAMA5D27 incl. 128 MB RAM o ARM Cortex-A5 core o Up to 500 MHz 4GB eMMC Interfaces: o 2xEthernet o Wifi o USB 2.
NTSecureGateway User Manual 11648_0008_0012_UM-User_Manual Revision: DV A1 10 / 14 Security Features • • • • • • • Dedicated cryptographic hardware engine (ARM TrustZone) Cryptography and security middleware services· Secure Boot Secure Update Various supported encryption algorithms, such as AES, RSA, Diffie-Hellman, Elliptic Curve Tamper Protection ATECC608 Secure Keystore Technical Data Dimension Figure 3: Dimension in mm Maximum Ratings Supply Voltage Operating Current Storage Temperature Operating
NTSecureGateway User Manual 11648_0008_0012_UM-User_Manual Revision: DV A1 11 / 14 Interfaces For Location of the interfaces see Figure 2: External Interfaces Power Supply Mating Connector: Phoenix Contact, Part No: 1836079 Pin Number 1 2 Description GND 24V Ethernet 1 10BASE-T and 100BASE-TX Ethernet connector Support for 24V passive Power over Ethernet (POE) Ethernet 2 10BASE-T and 100BASE-TX Ethernet connector CAN Bus / Digital Out Depending on mounting option this connector is used for CAN Bus or f
NTSecureGateway User Manual 11648_0008_0012_UM-User_Manual Revision: DV A1 12 / 14 User Button Application dependent Reset Button System Reset Status LED RGB LED, application dependent Wi-Fi Antenna Jack SMA Antenna connector. Use specified antenna only: Pulse W1010 NewTec GmbH · Buchenweg 3 · 89284 Pfaffenhofen a.d. Roth · Germany · Tel.: +49 7302 9611-0 · product-support@newtec.de · www.newtec.de F905 BLE Antenna Jack SMA Antenna connector.
NTSecureGateway User Manual 11648_0008_0012_UM-User_Manual Revision: DV A1 13 / 14 System Overview General Description The main functionality of this devices is to provide connectivity between different interfaces in a secure way. So there are a lot of communication interfaces that can be connected by software. The specific functionality depends on the software configuration of your application. For details please see software user guide. Block Diagram NewTec GmbH · Buchenweg 3 · 89284 Pfaffenhofen a.d.
NTSecureGateway User Manual 11648_0008_0012_UM-User_Manual Revision: DV A1 14 / 14 Installation Installation Requirements The NTSecureGateway is designed to be mounted in an electric cabinet with a minimum protection class of IP54. It is intended to be mounted on a DIN Rail according to EN 60715 (35mm x 7.5mm). First snap in the orange clip at the top position (1) to the DIN Rail. Then pull down the orange clip at the bottom side (2) with a screw driver, to also snap it to the DIN Rail.
