Quick Start Guide

ManualsBrandsNewstar ManualsMiscellaneousNSS1105

Quick Start Guide

For this Quick Start Guide, we offer three different easy step-by-step ways, letting you setup

this unit very quickly.

The First Way : If you don’t have DHCP (Dynamic Host Configuration Protocol)

Step 1. Connect the CAT-5 cable to the LAN port on the rear panel of Digital KVM via IP. And,

connects the opposite end of the CAT-5 cable to the hub.

Step 2. Set the IP address of a computer connected on the same network as Digital KVM via

IP to a similar unused address like 192.168.1.124

and the subnet mask of

255.255.255.0.

a. Right click on "My Network Places", and select "Properties". You will get the

following screen:

b. Right click on "Local Area Connection", and select "Properties" .

Summary of content (7 pages)

PAGE 1
Quick Start Guide For this Quick Start Guide, we offer three different easy step-by-step ways, letting you setup this unit very quickly. The First Way : If you don’t have DHCP (Dynamic Host Configuration Protocol) Step 1. Connect the CAT-5 cable to the LAN port on the rear panel of Digital KVM via IP. And, connects the opposite end of the CAT-5 cable to the hub. Step 2. Set the IP address of a computer connected on the same network as Digital KVM via IP to a similar unused address like 192.168.1.
PAGE 2
c. Double click on "Internet Protocol (TCP/IP)". d. Click “Advanced…” , then click “Add…” to add up the IP address of “192.168.1.124”, and the Subnet mask of “255.255.255.0”.
PAGE 3
Step 3. From that computer, open a web browser and go to https://192.168.1.123. Login using "admin" for both username and password. Step 4. Click on the Admin/Setup button then Network configuration (IP address, netmask, gateway). From here you can set the IP address as needed. The Second Way: If you have DHCP (Dynamic Host Configuration Protocol) Step 1. Please have your MAC address. You can find it on a white sticker on the bottom of the Digital KVM via IP. Here is an example, 00-0E-C5-00-08-1A. Step 2.
PAGE 4
Step 4. From the above DHCP log, you can easily find the DHCP assigned an IP to the Digital KVM via IP, 192.168.22.4. Once you have located this IP address, do NOT power off the Digital KVM via IP or your DHCP server since it might lease a different IP address. Step 5. Simply open a web browser and type https://192.168.22.4 to access your Digital KVM via IP. Login using “admin” for both username and password. The Third Way: Using the HyperTerminal via Serial Port Step 1.
PAGE 5
Step 3. If you never setup your HyperTerminal before, it will ask you to input your phone area code, please feel free to do so, and then click “OK”, you will get the following screen. Please type any name you prefer, for example, “abc”. Step 4. Choose the proper serial port you connect.
PAGE 6
Step 5. Change “Bits per second” to 115200. Step 6. Press “Enter”, you will get the following screen. Step 7. Follow the instruction on the screen. For example, simply type “I” for setting your IP, type “M” for changing the machine name, and so on. Here is a reminder for you, please type “W” after you made any change.
PAGE 7