NEWSTAR 2-PORT PS/2 KVM SWITCH with Built-in Cables and Microsoft / Mac support User Manual www.newstar.
TABLE OF CONTENTS INTRODUCTION--------------------------------------------------------------------- P1 FEATURES---------------------------------------------------------------------------- P1 SPECIFICATIONS------------------------------------------------------------------- P2 DISPLAY DIAGRAM ---------------------------------------------------------------- P3 HARDWARE INSTALLATION -----------------------------------------------------P4 MACINTOSH INSTALLATION ---------------------------------------------------
NS-211MICRO NS-211MICRO Introduction Specifications The all-in-one two port KVM switch (NS-211MICRO) allows users to access and control two computers from a single console (PS/2 keyboard, monitor, and PS/2 mouse).
NS-211MICRO NS-211MICRO Display Diagrams Hardware Installation Front View Step-by-Step Installation This manual provides you complete setup instructions for the hardware installation of the NS-211Micro-USB. Before you begin, please turn off all the computers that you are going to connect to the NS-211Micro-USB. Plugging and unplugging cables while computers are powered on might cause irreversible damage to your computers, data, and/or your switch, NEWSTAR will not be responsible for such damages.
NS-211MICRO NS-211MICRO Hardware Installation Hardware Installation 3. Connect your PS/2 keyboard and mouse directly into the PS/2 keyboard and mouse ports on the front panel of your switch. 2. Connect the PS/2 keyboard cable that is built into the KVM cable of your switch to the PS/2 key-board port on your computer. Keyboard PS/2 Keyboard Port Mouse PC1 Connecting the Computer 1. Connect the VGA cable that is built into the KVM cable of your switch to the VGA port on your first computer 3.
NS-211MICRO NS-211MICRO Hardware Installation Hardware Installation 1.Connect the VGA cable that is built into the KVM cable of your switch to the VGA port on your first computer. 3. Connect the PS/2 mouse cable that is built into the KVM cable of your switch to the PS/2 mouse port on your computer. PS/2 Mouse Port VGA Port PC2 PC2 4. Power on your computers,and refer to operation instruction. 2.
NS-211MICRO NS-211MICRO Macintosh Installation - How does it work? KEYBOARD HOT KEY COMMANDS Easily control one PC and one Macintosh system simultaneously by using Newstar's PS/2 to USB Mac adapter. Follow the hardware installation guide found on page 4. For Macintosh systems simply connect the Operation PS/2 keyboard and mouse connectors from the NS-211MICRO to Newstar's Mac adapter, and plug the USB connector into your Macintosh's USB port.
NS-211MICRO NS-211MICRO FCC Certifications LIMITED WARRANTY This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
NS-211MICRO NS-211MICRO FAX: +31 (0) 23 547 88 89 ed by NEWSTAR upon return to NEWSTAR of the defective Hardware. All Hardware (or part thereof) that is replaced by NEWSTAR, or for which the purchase price is refunded, shall become the property of NEWSTAR upon replacement or refund. GOVERNING LAW: This Limited Warranty shall be governed by the Haarlem, city of The Netherlands.
