User manual

3
----- Quick Start Guide
For this Quick Start Guide, we offer three different easy step-by-step ways, letting you
setup this unit very quickly.
The First Way : If you don’t have DHCP (Dynamic Host Configuration
Protocol)
Step 1. Connect the CAT-5 cable to the LAN port on the rear panel of NewStar Digital
KVM via IP. And, connects the opposite end of the CAT-5 cable to the hub.
Step 2. Set the IP address of a computer connected on the same network as NewStar
Digital KVM via IP to a similar unused address like 192.168.1.124
and the subnet
mask of 255.255.255.0
.
a. Right click on "My Network Places", and select "Properties". You will get the
following screen: